22 replies to this topic

[neverhadaholeinone]

Haven't carried a 3w I could trust in years.   Was using a Titleist 906F2 but was not too forgiving.  Picked up a used F11 ti 15* last week and very impressed.  First day I used I was putting for eagle after a blind uphill 2nd shot of about 220 yds in 25 degree weather with strong wind, missed the 6 footer for easy tap in bird. Hit some other excellent FW shots too.
Adams must have been on to something since TM is using a velocity slot in the new RBZ fairways. The Adams ti is stupid easy to hit off the fairway.  Haven't used it off the Tee yet, I have the Adams Super black hybrid 15* which is the best hybrid I have hit off the Tee and fairway, my go to club for short par 4's.
Liked the 3w 15* ti so much I just bought a 13.5 ti.
So, anyone looking to buy a new RBZ, give the F11 a look, they can be had for a lot less $$.
I'm over 50 and a 12HC.

Another club that has changed my game is the TM Superfast 2.0 driver.... Man, I'm in heaven after going thru countless drivers over the years. Popped one out 270 today in 36* weather. High draw on a straight away par 4. That was my best drive of the day and others were not close to that one. Was hitting only about 230 with my old driver. I had a R11 and no comparison to the 2.0 for me. Sold the R11 with no regrets.

[MizzyBYU24]

Has the Adams F10 wood last year, bought the f11 3 wood in the offseason to replace it since they're so cheap with the new LS's coming out, and it's awesome. Super hot face, just bores straight for me. I do wish i had gotten the ti version though. But all in all, great club.

[tx-ping]

I also have the F11 Ti and it's probably my favorite club.. unless I have done something stupid, I hit is straight and long every single time..That club for sure is an excellent club..Now debating on getting the Super XTD for my other set or another F11 Ti for much less....Either way, it is sure to be a win/win !

[paulshack]

i was just hitting this at golftown today .. and had a few great shots with it about 220-230 range... i never use a wood and dont even carry one in my bag because i am more about going straight...havent had much luck with some older woods i have in the garage... might have to invest in this .. some more practice with this thing and it would be awesome.. my draw/fade was bout 5 yards with clean contact... i want to go back there and practice!! lol


im just debating wether i need the ti or just a regular heaad.. probably just a regular for me... much cheaper and i am just trying to improve my game..

[caller]

I love my F11 Ti 15*

it is super long and flies well into the wind.

I did not care for the stock shaft so reshafted with the Harrison Saga and it is the money

[cb24]

I was actually looking at the RBZ as well and ended up with the F11 13.5* 3 wood (non titanium) and I love it.  Getting more yardage than rbz even with the same 15* loft but the 13.5 is money for me.  Highly recommend this to others

[TheMoneyShot]

I just cancelled my order on the RBZ's to the Adams XTD fwys and hybrids.  That Ti face makes a world of difference when it comes to shear power and distance!

[paulshack]

truly a big difference for titanium and regular head? (for someone trying to hit it straight and solid consistently )

[neverhadaholeinone]

cb24, on 12 March 2012 - 04:16 PM, said:

I was actually looking at the RBZ as well and ended up with the F11 13.5* 3 wood (non titanium) and I love it.  Getting more yardage than rbz even with the same 15* loft but the 13.5 is money for me.  Highly recommend this to others

My 13.5* was shipped to me today and I expect to game it this weekend and will post results.  Weird, when I first hit the f11 15* ti at the range I thought I threw $$$ down the drain on another 3w.  Got it on the course and wow, different animal, love it.  For those who are looking to buy the F11 Ti model, I picked both of mine used in excellent condition for $98 & $130.  If I hit the 13.5 as well as the 15, I will be selling the 15*.

[Dead Solid Perfect]

MizzyBYU24, on 12 March 2012 - 01:57 PM, said:

Has the Adams F10 wood last year, bought the f11 3 wood in the offseason to replace it since they're so cheap with the new LS's coming out, and it's awesome. Super hot face, just bores straight for me. I do wish i had gotten the ti version though. But all in all, grealub.

I have the Adams Fast 10 in my bag with a voodoo shaft, by far the easiest 3wood I've ever used.  I haven't tried the newest fairway woods from Adams but I do have the F11 driver with a RIP stiff tipped to X.  I've used Adams drivers for some time now and love their clubs.  I'd pay pretty much anything for equipment I buy and pay for what works..   Sometimes thats a hybrid that is used but matches one I have for 30 bucks of Ebay, deal of my life. Then other times it's a driver with a 300 dollar up charge on the shaft, but the thing I've found with Adams is their equipment always seems to be 100 bucks less in cost than the others.  I believe this has to do with them aggressively trying to gain market share.  Adams IMO is the most underrated manufacturer in the golf industry today!

[neverhadaholeinone]

cb24, on 12 March 2012 - 04:16 PM, said:

I was actually looking at the RBZ as well and ended up with the F11 13.5* 3 wood (non titanium) and I love it.  Getting more yardage than rbz even with the same 15* loft but the 13.5 is money for me.  Highly recommend this to others

Hit my 13.5* Ti 3 wood today, wow, what a club! Hitting off short grass at range, no problem getting the ball in the air.  Hard to make a bad shot with it.  Been searching for a long time for a club like this.  My F11 15* Ti is going back to the dealer.  I don't know how much better it can get with the new XTD's.

[neverhadaholeinone]

TheMoneyShot, on 12 March 2012 - 04:16 PM, said:

I just cancelled my order on the RBZ's to the Adams XTD fwys and hybrids.  That Ti face makes a world of difference when it comes to shear power and distance!

Great move, if their as good as or better than the Ti F11's, you will very pleased with your decision.

[matthilaman]

i used the F11 ti in a 5 wood and loved how hot the face was, but it would balloon too much for me.  i figured it was just the face, but i didnt bother to experiment with different shafts.  i just picked up a FD, but im thinking of fiddling with a ti 3 wood just because of how easy it was to elevate the ball and forgiving it was.  

what shafts are you guys using?  i had the made for voodoo S

[jsherm45]

Dead Solid Perfect, on 12 March 2012 - 05:39 PM, said:

I've used Adams drivers for some time now and love their clubs.  I'd pay pretty much anything for equipment I buy and pay for what works..

+1 from another satisfied Adams customer here. Really like what they have been doing with their line of Metal Woods recently.

Haven't found any reason to change anything even though their new stuff (F12) is tempting.

Long live the 9032 and the 9015D. For 3 woods, their BTY, F10, and Velocity Slot stuff is getting a ton of play.

[WVP]

Yep, Adams has been releasing some seriously great woods for a few years now. Not sure my Fast10's will ever leave the bag though I'm experimenting with the F12.

[kc10]

The Fast 11 is real good, however, the stock shaft is crap. Upgrade that shaft and you have a fairway wood as good as any.

[amrivew]

Is it the black f11ti?

[Laws of Woo]

Love my steel f11 3+ and 5 woods. Easy to hit and long. Wasn't crazy about the stock voodoo though, but a quick swap and it becomes a great club.

[jeffrey r]

I have a BTY 14.5* 3 wood that is a sweet club, it just lacks in some forgiveness.  I was looking at the F11 3 wood as a newer Adams FW to try, but I ended up picking up a cheap Speedline LP 3 wood.  I'll be taking it out tomorrow for a round, and will put it to the test against my tried and true G15 4 wood.  Looking forward to it--the head looks really nice, just not sure about the light Matrix shaft.

[Dugan408]

I just hit my new(new to me that is)used adams a3 xtd 18 loft hybrid-fw with a stock Aldila DVS shaft. I can't believe how incredibly easy it is to hit the stick. I was hitting nice straight piercing bombs which landed somewhere in the 210-220 area at the driving range in 45 degree weather. My 9032ti 14.5 with the Aldila Voodoo shaft is another awesome fairway wood which is made by Adams Golf. I can't imagine what the F11 and super fairway ti woods are like. In my opinion, Adams is giving Tour Edge Exotics a serious run for the money when it comes to the best fairway woods in golf!!!

[ngw257]

Just picket up my f11 ti. I like the lower profile than the 12. excited to hit it tomorrow.

[gatorb8]

Love mine after getting it reshafted.

Globalgolf has mint ones on the cheap.

[KYMAR]

had 40 bucks in store credit at GG and with a trade in of my old club I picked up a 15* F11 with the Voodoo stiff for 15 bucks. little dirty on the bottom but mint crown, mint matching head cover. Even the sticker price of 67 bucks i thought was a good deal. Anyone hit the steel at Ti that can comment on the diifference? Also Is the voodoo really that bad? I hit a few balls in the hitting net there and it felt pretty stout but, i know thats never all that telling. I guess I'm just wondering if it plays soft or what the criticisms are?