93 replies to this topic

[choeppner]

Hello Everyone,

I would like to take this chance to invite everyone to come visit us at the PGA Show.  Our booth number is 2103.

At the PGA Show we will be unveiling our Orlando Collection.  Dave is Bringing several dozen One-of-a-kind Custom putters, including Garage, ART and Original Prototypes.. In Right and Left handed

Over the next few days, I will be posting a sampling of putters that we are going to be bringing for everyone.  

I hope everyone has a great time at the show.  

Thanks

-Chris  

[DB MACHINE]

Thanks Chris.

Please note our booth # is 2103. We are located on the front isle, next to Accusport (Vector Launch Monitors and Simulators) and one booth away from Table Rock Golf.

More photos and announcements in the coming days.

Hope to see some of you there! (we will post lots of photos for those that can't make it).

All the best,

-Dave

[Lngnokr71]

Any plans on green tools?

[choeppner]

Lngnokr71, on Jan 21 2009, 09:59 AM, said:

Any plans on green tools?

Hello,

We are planning on showing them off during the PGA show.  We will have pictures posted the day of for those that can’t make it.

Thanks

-Chris

[Lngnokr71]

choeppner, on Jan 21 2009, 08:11 PM, said:

Lngnokr71, on Jan 21 2009, 09:59 AM, said:

Any plans on green tools?

Hello,

We are planning on showing them off during the PGA show. We will have pictures posted the day of for those that can't make it.

Thanks

-Chris

Are they made with wood by chance???

[blade_man]

Thanks for the invite Chris but we will not make it this year but already planning a vacation around the show next year! I will be getting with you on the putter we talked about earlier after you get back from the show.
Thanks and have a great time (yes I know it is a lot of work!)

[choeppner]

Lngnokr71, on Jan 21 2009, 08:18 PM, said:

choeppner, on Jan 21 2009, 08:11 PM, said:

Lngnokr71, on Jan 21 2009, 09:59 AM, said:

Any plans on green tools?

Hello,

We are planning on showing them off during the PGA show. We will have pictures posted the day of for those that can't make it.

Thanks

-Chris

Are they made with wood by chance???

Parts of them    

[DRGJR72]

choeppner, on Jan 21 2009, 12:42 AM, said:

Hello Everyone,

I would like to take this chance to invite everyone to come visit us at the PGA Show.  Our booth number is 2130.

At the PGA Show we will be unveiling our Orlando Collection.  Dave is Bringing several dozen One-of-a-kind Custom putters, including Garage, ART and Original Prototypes.. In Right and Left handed

Over the next few days, I will be posting a sampling of putters that we are going to be bringing for everyone.  

I hope everyone has a great time at the show.  

Thanks

-Chris  

Hey Chris,

Good luck to you, Dave, and whomever else is representing DLR at the show.  Your product speaks for itself and the PGA show is a great place to showcase that.  I will not be there, as I am no longer a PGA member.  But if I were there I would definitely stop by, talk some shop and check out the goodies.

I would also recommend to any of the wrxers who are able to attend to put them on your list of booths to check out.  Amazing custom putters.

[iteachgolf]

Chris will you be attending? If so we will have to do something.

[choeppner]

I am going to try.  No guarantees though as I don't know if I can get the time off, especially during that specific week

Get on back up here to Savannah and we can tee it up again.

-Chris

[iteachgolf]

choeppner, on Jan 21 2009, 09:29 PM, said:

I am going to try.  No guarantees though as I don't know if I can get the time off, especially during that specific week

Get on back up here to Savannah and we can tee it up again.

-Chris

I'll  play you for a putter haha. I will when I have a break. I've been really busy lately.

[joesgonegolfing]

Machine accessories....add those to the must have list.  Can't wait for the pics.

Joe

[choeppner]

Well Guys,

Got the word today that work is going to let me off to go to the show.  Looking forward to seeing yall there

-Chris

[aue21]

See you there,  .NOW post some more teaser pic's !        LOL

[iteachgolf]

choeppner, on Jan 22 2009, 05:05 PM, said:

Well Guys,

Got the word today that work is going to let me off to go to the show.  Looking forward to seeing yall there

-Chris

Give me a call, we will go have dinner or something.  I'll be there Friday and Saturday

[choeppner]

Hey Everyone,

Wanted to share this picture with you.  This is another one of the putters we will be bringing to the show.  This one is a Nibble Back Fat Back.  I love how the South Beachs cuts are exposed and compliment the Drill Here hosel.

We will also have some that have the rounded bumpers

Thanks

-Chris

[bcass]

Hey Chris:  Does the round hand bent hosel come in stainless to match the head? Do you have any pictures at address and back of hand bent without offset on a boatback or nibbleback? Can't decide between the modular center shaft or round hand bent, didn't get to try hand bent. Ask Dave if he thinks some toe hang without offset would work for me.
Thanks,
Brad

Edited by bcass, 23 January 2009 - 11:39 PM.

[MchSt805]

Just wanted to point out the differences in booth numbers above...Chris noted 2130, Dave said 2103.  Sure it's not a huge deal as people will find you either way, just didn't want anyone confused.

I'd love to go to the show some day, but this year is not an option unfortunately.  College will tend to limit 1200 mile voyages temporarily.

[choeppner]

bcass, on Jan 24 2009, 12:36 AM, said:

Hey Chris:  Does the round hand bent hosel come in stainless to match the head? Do you have any pictures at address and back of hand bent without offset on a boatback or nibbleback? Can't decide between the modular center shaft or round hand bent, didn't get to try hand bent. Ask Dave if he thinks some toe hang without offset would work for me.
Thanks,
Brad

Hello Brad,

We can do a 303 Stainless Hand Bent Hosel for you.  I will ask Dave about getting some pics.  On a side note, Thanks for stopping by the Studio.  I know Dave liked meeting you.

MchSt805, on Jan 24 2009, 01:03 AM, said:

Just wanted to point out the differences in booth numbers above...Chris noted 2130, Dave said 2103.  Sure it's not a huge deal as people will find you either way, just didn't want anyone confused.

I'd love to go to the show some day, but this year is not an option unfortunately.  College will tend to limit 1200 mile voyages temporarily.

Thanks

-Chris

[choeppner]

Hey Everyone,

Wanted to share this with you.  This is our new MACHINE M6 Putter.  It will be making it's debut at the show

This is a 1018 Carbon Steel head, with Hand Hammered Peening, and the bumpers have been rounded.  We have several hosels for you to choose from, these pics depict just a few of them.  Weights are in the 350 gram range with our standard Flat Front Plumber Neck and go up or down depending on hosel type and material, and any custom grinding and milling.  Choice of standard milled alignment marks which are Sightline On Topline, Sightline in Cavity, Sight Dot, or Naked. You can also choose between our standard carbon finishes which are copper plate, nickel plate or hot salts gun metal blue.

We will blue this head tomorrow in our final batch before the show.

Enjoy

-Chris

[jh19]

Chris,

We might need to talk about the M6!

That is sweet!

[iteachgolf]

jh19, on Jan 25 2009, 07:18 PM, said:

Chris,

We might need to talk about the M6!

That is sweet!

+1

[fredgolferguy]

I LOVE the black stubby neck on the M6 that is one of the best putters ive seen on the wrx great work.

The m6 is an interesting, attractive design.  with a std. length hosel, what is the toe hang?
I also think it would be cool to bring a m6 type back to the new MORPHER line that would be pretty awesome.

[choeppner]

fredgolferguy, on Jan 25 2009, 09:14 PM, said:

I LOVE the black stubby neck on the M6 that is one of the best putters ive seen on the wrx great work.

The m6 is an interesting, attractive design.  with a std. length hosel, what is the toe hang?
I also think it would be cool to bring a m6 type back to the new MORPHER line that would be pretty awesome.

Hello,

The Toe Hang on these putter with a Standard Plumber Neck is 4 O'Clock

Thanks

-Chris

[w8liftr]

Great looking stuff. I can't wait to see more.

[DB MACHINE]

w8liftr, on Jan 26 2009, 03:39 PM, said:

Great looking stuff. I can't wait to see more.

Thanks! Per your request....

Here is a really clean, neoclassic carbon steel putter with big MOI, and a really soft, yet solid feel.

This is an all 1018 Carbon Steel putter that just came out of the hot salts Gunmetal Blue in our shop... This FatBack flange has a mini-Boat Back grind with melted bumpers.

The putter has hidden South Beach Cuts in the inside middle of the head and flange to push weight to the heel and toe, and make this putter super forgiving. The head weight is 355 grams as assembled with standard Flat Front Plumber Neck hosel and four alloy weights. Optional weight kits allow additional precise and significant user-weight, balance and MOI adjustment, in addition to the shape and alignment adjustment.

No need to send this back to anyone's shop.... you can do it all yourself, as you please! (and keep the change!).

Thanks for all the well wishes everyone.

More sneak peek's tomorrow!

Best,

-Dave

[DB MACHINE]

Hey again,

Here is an at-address view of the same putter above. We can custom grind the flange to suit your eye, from square (as milled) to rounded, melted, or more to include a Boat-tail (pear) shape. This model has a slight boat grind, where the heel is more rounded than the toe.

More sneak peek photos later today!

Thanks,

-Dave

[AUDuffer]

Dave, that's a beautiful putter!  Don't tell Chris, but my wallet is begging to pick up another of your putters!

[choeppner]

AUDuffer, on Jan 27 2009, 01:18 PM, said:

Dave, that's a beautiful putter!  Don't tell Chris, but my wallet is begging to pick up another of your putters!

I heard that. LOL

[bcass]

Hey Chris:  More pictures please.  Somebody had mentioned a new hosel design?