4633 replies to this topic

[choeppner]

junior_golfer, on 12 March 2012 - 07:38 AM, said:

Any centre shafted options?

We do offer all of our heads in a Center Shaft Configuration.  We can do this 2 ways:

1) Tig Weld Center Shaft
2) Modular Center Shaft Hosel

I will get some pics and post them for you.

Thanks

-Chris

[Stretch]

Hi Chris and Dave. Do you have any pictures of a Transfixer at address without the tongue? I'm not big on alignment features but otherwise that looks like it could be the ticket for me with a modular CS.

[junior_golfer]

Awesome! Look forward to seeing some...I'll shoot you an e-mail so we can get the ball rolling. Literally.  

[weaver93]

junior_golfer, on 12 March 2012 - 12:28 PM, said:

Awesome! Look forward to seeing some...I'll shoot you an e-mail so we can get the ball rolling. Literally.  

Here is a modular center shaft that Dave just finished along with the hand bent (I just had to show it off) and a couple welded center shafts. Dave can do it all and it is much safer than carrying around all that cash!!

[choeppner]

Thanks Mark

[choeppner]

junior_golfer, on 12 March 2012 - 12:28 PM, said:

Awesome! Look forward to seeing some...I'll shoot you an e-mail so we can get the ball rolling. Literally.  

Here are a couple of additional photo's   Looking forward to working with you on this MACHINE

Thanks

-Chris

[torrejuan]

Do you have the Transfixer blue on an anser type of putter? I would love to see what that looks like.

[ramylson]

Chris..  PM Sent.

[choeppner]

ramylson, on 13 March 2012 - 10:15 AM, said:

Chris..  PM Sent.

Brad,

Got your PM and sent an e-mail to the office to get you an answer

Thanks

-Chris

[choeppner]

torrejuan, on 13 March 2012 - 04:35 AM, said:

Do you have the Transfixer blue on an anser type of putter? I would love to see what that looks like.

Hello,

Unfortunately we don't.  We can only do the Blue Anodized Finish on the Alloy Material.  Our traditional anser style heads are milled from 1018 Carbon, 303 Stainless, Billet Copper, Aluminum Bronze and Damascus Steel.  We can't anodize those materials.

We can do the Blue Anodized Finish on Flanges and Necks that are milled from the Alloy if you would like.

Thanks in advance

-Chris

[rymail00]

OHHHHHHHHHH!!!!!!!!!!! I wanna see the anser style in copper!!!!!

[choeppner]

rymail00, on 13 March 2012 - 08:17 PM, said:

OHHHHHHHHHH!!!!!!!!!!! I wanna see the anser style in copper!!!!!

That one is going to be a gorgeous one   Don't think we have had one ordered in Billet Copper Yet, but you can always be the first      LOL

Thanks

-Chris

[choeppner]

Hey Guys,

I hope everyone is having a great night   I wanted to share pics of a Custom MACHINE that was just completed for a Customer.

This MACHINE consists of a 303 Stainless Head, a 303 Stainless Hand Bent Hosel, and a 303 Stainless Heavy Blade Back Flange.  This customer also ordered a 303 Stainless Fat Back Flange and a 303 Stainless Tongue Back Flange.

The finish on the Head, Necks and Flanges is our Custom Rainbow Torch Finish.

The Medallion on this MACHINE is a Custom Engraved Damascus Medallion finished in a Custom Rainbow Torch Finish.

We made this MACHINE where the Head Weight would be 360 Grams regardless of which flange is installed so that he can swap flanges and keep the same feel which changing the head shape

Enjoy

-Chris

[EdGolf]

There is just so many choices and combinations that makes it hard to decided which one for me lol...

Wonder if you guys shipped Internationally?

[choeppner]

EdGolf, on 13 March 2012 - 10:42 PM, said:

There is just so many choices and combinations that makes it hard to decided which one for me lol...

Wonder if you guys shipped Internationally?

Hello,

Thanks for the post   If you have any questions, please feel free to contact me anytime at Choeppner@Doglegright.com.  If I don't have the answer on hand, I will get it for you.  No Obligations whatsoever

We definitely ship internationally   The MACHINE that I just posted photo's of has it's new home in New Zealand

Thanks

-Chris

[EdGolf]

Thanks Chris for your prompt reply!

E-mail send

[choeppner]

EdGolf, on 13 March 2012 - 11:12 PM, said:

Thanks Chris for your prompt reply!

E-mail send

Hello,

Got your e-mail.  Let me think of some options here that we could do to meet your specifications   I will send you a response with some pictures and breakdowns first thing tomorrow morning.

Thanks in advance

-Chris

[Thaddy]

Chris, got any pictures of a certain Fixer with a special neck?

[Jodymac]

Thaddy, on 14 March 2012 - 08:19 AM, said:

Chris, got any pictures of a certain Fixer with a special neck?

Got any pics of a rainbow torch MA2 with a custom triangle site dot.  I'm eagerly awaiting!!!

[choeppner]

Hello,

Working on getting some photo's for yall

Thanks for all the great comments

-Chris

[beruo]

Jodymac, on 14 March 2012 - 05:31 PM, said:

Thaddy, on 14 March 2012 - 08:19 AM, said:

Chris, got any pictures of a certain Fixer with a special neck?

Got any pics of a rainbow torch MA2 with a custom triangle site dot.  I'm eagerly awaiting!!!

Got any pics of any...let's say...melted lefty M10s with a tig-welded Square Cut plumber neck?  

Just curious.

[whatshannenin]

beruo, on 15 March 2012 - 12:18 AM, said:

Jodymac, on 14 March 2012 - 05:31 PM, said:

Thaddy, on 14 March 2012 - 08:19 AM, said:

Chris, got any pictures of a certain Fixer with a special neck?

Got any pics of a rainbow torch MA2 with a custom triangle site dot.  I'm eagerly awaiting!!!

Got any pics of any...let's say...melted lefty M10s with a tig-welded Square Cut plumber neck?  

Just curious.

Now that is a custom request!!!!  But with Machine....anything is possible and Dave will meticulously make it right!   I'd love to see a  Tig Welded Center Shaft M10 with a custom closer weight....

[choeppner]

Hey Guys,

I hope everyone is having a great week   I wanted to share with you a Custom MACHINE Garage Putter that was just finished for a customer   

This MACHINE Garage consists of a 5.0 M2A Converter Head milled from Aluminum Bronze with Custom Hand Hammered Peening, with a Aluminum Bronze Beefy Back Flange and an Aluminum Bronze Faceted Hand Bent Hosel.

The bumpers on this MACHINE have been Melted for a smoother look and the finish is Dave's Antique Patina Pre-Worn Patina.

The Medallion on this MACHINE is a Custom Mokume Medallion

Enjoy

-Chris

[whatshannenin]

choeppner, on 20 March 2012 - 09:39 PM, said:

Hey Guys,

I hope everyone is having a great week   I wanted to share with you a Custom MACHINE Garage Putter that was just finished for a customer   

This MACHINE Garage consists of a 5.0 M2A Converter Head milled from Aluminum Bronze with Custom Hand Hammered Peening, with a Aluminum Bronze Beefy Back Flange and an Aluminum Bronze Faceted Hand Bent Hosel.

The bumpers on this MACHINE have been Melted for a smoother look and the finish is Dave's Antique Patina Pre-Worn Patina.

The Medallion on this MACHINE is a Custom Mokume Medallion

Enjoy

-Chris

OMG Mokume acid trip!!!! Sick!!!  

[Bob Cat]

Confession:  I just come here to look at the pictures.
Another confession:  Pages 122 and 123 are stuck together.  

Edited by Bob Cat, 21 March 2012 - 05:51 PM.

[choeppner]

LOL  Too funny!!! LOL

Thanks

-Chris

[DarrinStojevich]

choeppner, on 06 December 2011 - 04:46 PM, said:

Hey Guys,

I hope everyone is having a great day.  I wanted to share pics of another Custom MACHINE that was just completed and is getting ready to ship to it's new owner

This is a MACHINE M1A Adjuster with a 303 Stainless Head and a 303 Stainless Pill Cut Plumber Neck.  The Medallion in the cavity is an Alloy Medallion.

Enjoy the pics

Thanks

-Chris

[DarrinStojevich]

I love the simple lines of a center shaft anser style head, and your tig welded hosels are insane! I love the simplicity, and insane finishes coupled with contrasting medallions are works of art! How much would something like that in an adjustable head cost? I think your milling work is incredible too! I can't wait for the day I can afford one of these, so I can thow out my other putters! All other putters don't even compare to these! Have you guys ever heard of or possibly done any sound slot cuts thru the blade, starting at the bottom and going thru the topline? I'm really curious as to what that.would feel like?! Thank you for making an awesome flat stick!

[choeppner]

Hey Guys,

Thanks for all the great comments

I wanted to share one more MACHINE with you that was just finished for a Cool Clubs Customer

This MACHINE features a 5.0 M2A Converter Head milled from 303 Stainless, a 303 Stainless Heavy Blade Back Flange and a 303 Stainless Fluted Round Hand Bent Hosel

The Medallion is a Black Anodized Alloy Medallion

Enjoy

-Chris

[weaver93]

Very seldom do I score on one of the Ebay "super deals" that I am always seeing and hearing, but last Sunday I got a break. I picked this up off Ebay from Clubfinders. It needs a little TLC, but I think DB will be able to take care of that for me.

Always wanted one of these!