1299 replies to this topic

[UnderPar18]

So as I alluded to a few pages pages back I ordered my Callaway driver and received it yesterday.

I received:
45.5” stock when I ordered 44.75”
Did not include a heavier weight because they never had the correct length so it was playing at D4 as I requested
Lamkin Grip was stock and not +1/32”

Pretty crappy of a build by Callaway. I called and they offered to build me a new driver or pay for the club work to be done locally. I chose locally as I know it will be done correctly. All I asked was for a 16 and 20 gram weight to be mailed to me so that I can dial in the best SW for me.

[Viewing As Guest]

[Lefty28]

 UnderPar18, on 12 February 2019 - 07:17 AM, said:

So as I alluded to a few pages pages back I ordered my Callaway driver and received it yesterday.

I received:
45.5” stock when I ordered 44.75”
Did not include a heavier weight because they never had the correct length so it was playing at D4 as I requested
Lamkin Grip was stock and not +1/32”

Pretty crappy of a build by Callaway. I called and they offered to build me a new driver or pay for the club work to be done locally. I chose locally as I know it will be done correctly. All I asked was for a 16 and 20 gram weight to be mailed to me so that I can dial in the best SW for me.

That sucks. Looks like a good result though. I’ve had similar experiences with all the other OEMs and most provide excellent service. I will say that I was always impressed with Callaways help when I had issues with their clubs in the past.

[UnderPar18]

 Lefty28, on 12 February 2019 - 08:26 AM, said:

 UnderPar18, on 12 February 2019 - 07:17 AM, said:

So as I alluded to a few pages pages back I ordered my Callaway driver and received it yesterday.

I received:
45.5” stock when I ordered 44.75”
Did not include a heavier weight because they never had the correct length so it was playing at D4 as I requested
Lamkin Grip was stock and not +1/32”

Pretty crappy of a build by Callaway. I called and they offered to build me a new driver or pay for the club work to be done locally. I chose locally as I know it will be done correctly. All I asked was for a 16 and 20 gram weight to be mailed to me so that I can dial in the best SW for me.

That sucks. Looks like a good result though. I’ve had similar experiences with all the other OEMs and most provide excellent service. I will say that I was always impressed with Callaways help when I had issues with their clubs in the past.

Here’s where it gets interesting. I brought my driver to my club builders today and he cut it down to 44.75” and built a grip up to +1/32 as I wanted. I asked him to measure the SW and it came in at D5.1.... I took off the weight again to check and it’s definitely the 12 gram stock weight.

Now I’m interested to see if it’s just a heavier head they chose for me or if it was hot melted any? Standard 45.5 is supposed to be D4 so 44.75” at D5 is really interesting.

[Krt22]

Strange indeed. I play mine at 45" and had to add lead tape to get it to D4 with a nearly 80G shaft

[Farrow]

 UnderPar18, on 12 February 2019 - 04:02 PM, said:

 Lefty28, on 12 February 2019 - 08:26 AM, said:

 UnderPar18, on 12 February 2019 - 07:17 AM, said:

So as I alluded to a few pages pages back I ordered my Callaway driver and received it yesterday.

I received:
45.5” stock when I ordered 44.75”
Did not include a heavier weight because they never had the correct length so it was playing at D4 as I requested
Lamkin Grip was stock and not +1/32”

Pretty crappy of a build by Callaway. I called and they offered to build me a new driver or pay for the club work to be done locally. I chose locally as I know it will be done correctly. All I asked was for a 16 and 20 gram weight to be mailed to me so that I can dial in the best SW for me.

That sucks. Looks like a good result though. I’ve had similar experiences with all the other OEMs and most provide excellent service. I will say that I was always impressed with Callaways help when I had issues with their clubs in the past.

Here’s where it gets interesting. I brought my driver to my club builders today and he cut it down to 44.75” and built a grip up to +1/32 as I wanted. I asked him to measure the SW and it came in at D5.1.... I took off the weight again to check and it’s definitely the 12 gram stock weight.

Now I’m interested to see if it’s just a heavier head they chose for me or if it was hot melted any? Standard 45.5 is supposed to be D4 so 44.75” at D5 is really interesting.

Is it the SZ version? If so, did you check the front weight to see if they put a heavier weight there instead of on the slider?

[UnderPar18]

 Farrow, on 13 February 2019 - 05:29 AM, said:

 UnderPar18, on 12 February 2019 - 04:02 PM, said:

 Lefty28, on 12 February 2019 - 08:26 AM, said:

 UnderPar18, on 12 February 2019 - 07:17 AM, said:

So as I alluded to a few pages pages back I ordered my Callaway driver and received it yesterday.

I received:
45.5” stock when I ordered 44.75”
Did not include a heavier weight because they never had the correct length so it was playing at D4 as I requested
Lamkin Grip was stock and not +1/32”

Pretty crappy of a build by Callaway. I called and they offered to build me a new driver or pay for the club work to be done locally. I chose locally as I know it will be done correctly. All I asked was for a 16 and 20 gram weight to be mailed to me so that I can dial in the best SW for me.

That sucks. Looks like a good result though. I’ve had similar experiences with all the other OEMs and most provide excellent service. I will say that I was always impressed with Callaways help when I had issues with their clubs in the past.

Here’s where it gets interesting. I brought my driver to my club builders today and he cut it down to 44.75” and built a grip up to +1/32 as I wanted. I asked him to measure the SW and it came in at D5.1.... I took off the weight again to check and it’s definitely the 12 gram stock weight.

Now I’m interested to see if it’s just a heavier head they chose for me or if it was hot melted any? Standard 45.5 is supposed to be D4 so 44.75” at D5 is really interesting.

Is it the SZ version? If so, did you check the front weight to see if they put a heavier weight there instead of on the slider?

Yes.  2 gram in the front and a 12 gram in the sliding track

[chris975d]

 UnderPar18, on 13 February 2019 - 05:35 AM, said:

 Farrow, on 13 February 2019 - 05:29 AM, said:

 UnderPar18, on 12 February 2019 - 04:02 PM, said:

 Lefty28, on 12 February 2019 - 08:26 AM, said:

 UnderPar18, on 12 February 2019 - 07:17 AM, said:

So as I alluded to a few pages pages back I ordered my Callaway driver and received it yesterday.

I received:
45.5" stock when I ordered 44.75"
Did not include a heavier weight because they never had the correct length so it was playing at D4 as I requested
Lamkin Grip was stock and not +1/32"

Pretty crappy of a build by Callaway. I called and they offered to build me a new driver or pay for the club work to be done locally. I chose locally as I know it will be done correctly. All I asked was for a 16 and 20 gram weight to be mailed to me so that I can dial in the best SW for me.

That sucks. Looks like a good result though. I've had similar experiences with all the other OEMs and most provide excellent service. I will say that I was always impressed with Callaways help when I had issues with their clubs in the past.

Here's where it gets interesting. I brought my driver to my club builders today and he cut it down to 44.75" and built a grip up to +1/32 as I wanted. I asked him to measure the SW and it came in at D5.1.... I took off the weight again to check and it's definitely the 12 gram stock weight.

Now I'm interested to see if it's just a heavier head they chose for me or if it was hot melted any? Standard 45.5 is supposed to be D4 so 44.75" at D5 is really interesting.

Is it the SZ version? If so, did you check the front weight to see if they put a heavier weight there instead of on the slider?

Yes.  2 gram in the front and a 12 gram in the sliding track

Sounds like you got an extra Flashy head!

[Holy Moses]

 nsxguy, on 09 February 2019 - 12:02 AM, said:

 lanejsl, on 08 February 2019 - 11:30 PM, said:

So Phil uses the Flash last week and and completely sucked. Back to the Rouge this week and...?

So Phil uses the Flash last week and and completely sucked. Back to the Rouge this week and...?

Why do you say everything twice ?

Why do you say everything twice ?

“And then there was Jimmy Two Times, who got that nickname because he said everything twice, like, ‘I'm gonna go get the papers, get the papers.’”

[Lacey Underall]

Received my custom Epic Flash Sub Zero yesterday. Order said it would take 3-4 weeks but I received it in 7 days.

Attached Thumbnails

• 
• 
• 
• 
• 

[Holy Moses]

What's the consensus on ball speed with this Epic Flash? 1-2 MPH more than the Rogue?

[Viewing As Guest]