Jump to content

Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with members, access to all forums and eligiblility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

- - - - -

Scotty Cameron Newport Classic


60 replies to this topic

#31 MattMo

MattMo

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 2,210 posts
  •  
  • Member #: 102846
  • Joined: 02/01/2010
  • Location:Nebraska
  • Handicap:8
  • Ebay ID:Mattmorrissey
GolfWRX Likes : 375

Posted 23 June 2018 - 09:16 PM

View PostPutterPro, on 22 June 2018 - 08:39 PM, said:

I think the rust is so even, it looks quite nice. You’d really kick yourself if the CLR or coke bath took away from the consistency.

I think it comes down to your personal preference, if you are okay with the rust- play it. If every time you look at it you think about getting rid of that rust, then it needs a bath!

In terms of grips, just don’t go too big- you’ll lose all the feel!

I’m not a big rust guy, but I agree it’s nice and consistent. Almost looks like an aftermarket antique finish.

Ping G25 9.5* w/ Harrison Saga
Ping G25 4W w/ TFC
Ping G25 20* Hybrid w/ TFC
Ping ie1 4-U w/ CFS
Ping Glide 54* WS
Ping Glide Stealth 58* ES
SC Studo Select Newport, 35"

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


1

#32 duck hook

duck hook

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,072 posts
  •  
  • Member #: 747
  • Joined: 05/23/2005
GolfWRX Likes : 117

Posted 23 June 2018 - 10:43 PM

Wouldnt be surprised if it has an extension in the shaft once you pull the grip

2

#33 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 24 June 2018 - 04:37 AM

I found out from the previous owner it was setup for a pro, so they changed the shaft to suit the player by putting in new 36" shaft...

3

#34 MarkG23

MarkG23

    Newbie

  • Members
  • Pip
  • 13 posts
  •  
  • Member #: 378258
  • Joined: 05/30/2015
  • Location:Ascot
  • Handicap:13
  • Ebay ID:geeman23561
GolfWRX Likes : 6

Posted 28 June 2018 - 04:46 AM

Easy job. It's a Carbon Steel head with no over -finish [ like Laquer or Metal Plating ] so easier to do if you have little experience.

If you don't have access to a Dremel and flapwheels, or a grinding machine, take it any good local metalworking shop with a small polishing / grinding set up and ask them to run the rust off with a MEDIUM nylon nylon based polishing wheel then a 1000 grit nylon wheel and then a 2000 grit wheel. Make absolutely sure they protect the shaft as its easy to mark the shaft when trying to de-rust the hosel.

You should get back the head looking a little bit like very finely 'satinised' metal. It does not need to be highly polished. Next do your paint infill and I'd guess you could purchase a small brush / small tin of enamel paint and a small bottle of thinners for $10 ? For absolute 'authenticity' go onto the Scotty website and check the Archive for the relevant paint job. You can get metal marking pens that 'paint' as well and these can make life easier.

Next make sure you remove ALL excess paint and 'laitence' from the thinners. The best way is using a lint free cloth and some pure acetone  [nail varnish remover]. Make sure you do this in a well ventilated area as she will not only find out you've stolen her remover but the smell is quite strong !

To 'Black' the putter the layman's way is to 'cold' black it. This is a form of metal oxidisation and used widely on Guns etc., Birchwood Casey make a 'Gun Blue' product - about $12 for a small bottle - and you want the gel one as its much easier to apply. As you start applying the metal will discolour Blue/Black and then black as you apply more. To get a consistent finish you need to work the gel in. Wipe all excess off and allow to dry. You can re-apply more gel if you get a ''patchy'' finish.

Once completely dry ''polish' up a little with a soft lint free cloth then make yourself an Oil Cloth using a lint free cloth and light organic lubrication oil [ we have ''3 in 1'' here which comes in a small 4 oz. tin] Put the oil onto the cloth and wipe the oil all over the Putter surface. You will get a little black on the cloth but that's fine.

Keep the cloth in a small plastic bag in your bag or Car Boot [ trunk ] as you will need it to wipe down the Head after use to keep the finish and assist protection from the elements.

You will lose maybe 5 grms from the metal 'stripping' process and as I refiub around 150 + older Scotties a year [ and weigh most before and after ] the above process should not make a huge difference to the head. You will do more to alter the feel / balance of the Putter by cutting the shaft down and / or putting a different grip on it than the above method and if you can tell the difference then you have better feel than 99% of amateur Golfers in my opinion.

Hope that helps. It's easier to do than it sounds. I actually use a specially formulated cold blacking system and also flame seal the metal.......as well as some other tricks for longevity but that's another story

Best of luck whatever you do.

4

#35 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 28 June 2018 - 06:18 AM

View PostMarkG23, on 28 June 2018 - 04:46 AM, said:

Easy job. It's a Carbon Steel head with no over -finish [ like Laquer or Metal Plating ] so easier to do if you have little experience.

If you don't have access to a Dremel and flapwheels, or a grinding machine, take it any good local metalworking shop with a small polishing / grinding set up and ask them to run the rust off with a MEDIUM nylon nylon based polishing wheel then a 1000 grit nylon wheel and then a 2000 grit wheel. Make absolutely sure they protect the shaft as its easy to mark the shaft when trying to de-rust the hosel.

You should get back the head looking a little bit like very finely 'satinised' metal. It does not need to be highly polished. Next do your paint infill and I'd guess you could purchase a small brush / small tin of enamel paint and a small bottle of thinners for $10 ? For absolute 'authenticity' go onto the Scotty website and check the Archive for the relevant paint job. You can get metal marking pens that 'paint' as well and these can make life easier.

Next make sure you remove ALL excess paint and 'laitence' from the thinners. The best way is using a lint free cloth and some pure acetone  [nail varnish remover]. Make sure you do this in a well ventilated area as she will not only find out you've stolen her remover but the smell is quite strong !

To 'Black' the putter the layman's way is to 'cold' black it. This is a form of metal oxidisation and used widely on Guns etc., Birchwood Casey make a 'Gun Blue' product - about $12 for a small bottle - and you want the gel one as its much easier to apply. As you start applying the metal will discolour Blue/Black and then black as you apply more. To get a consistent finish you need to work the gel in. Wipe all excess off and allow to dry. You can re-apply more gel if you get a ''patchy'' finish.

Once completely dry ''polish' up a little with a soft lint free cloth then make yourself an Oil Cloth using a lint free cloth and light organic lubrication oil [ we have ''3 in 1'' here which comes in a small 4 oz. tin] Put the oil onto the cloth and wipe the oil all over the Putter surface. You will get a little black on the cloth but that's fine.

Keep the cloth in a small plastic bag in your bag or Car Boot [ trunk ] as you will need it to wipe down the Head after use to keep the finish and assist protection from the elements.

You will lose maybe 5 grms from the metal 'stripping' process and as I refiub around 150 + older Scotties a year [ and weigh most before and after ] the above process should not make a huge difference to the head. You will do more to alter the feel / balance of the Putter by cutting the shaft down and / or putting a different grip on it than the above method and if you can tell the difference then you have better feel than 99% of amateur Golfers in my opinion.

Hope that helps. It's easier to do than it sounds. I actually use a specially formulated cold blacking system and also flame seal the metal.......as well as some other tricks for longevity but that's another story

Best of luck whatever you do.

Awesome reply and thanks heaps for that! You are a legend!

I have removed the head from the shaft and "bathed" the head in coke and given it a bit if a rub with 0000 steel wool and it has come up pretty good, a few small areas of pitting, but generally pretty good. The worst of the pitting seems to be around the hosel and shaft connection point. Should i still grind/polish it back further to get that "satinised look"?

In regards to the oil used after bluing, i have a range to currently choose from; Lanox, Inox, WD-40, Remington oil, G96 and traditional silicone oil. Which would be the best to use or should i used the "3 in 1" oil you suggested?

Also, should i paint before or after i blue?

Edited by Pesquado, 28 June 2018 - 06:20 AM.


5

#36 PixlPutterman

PixlPutterman

    Look At My Lefty J33R(hey I can wish)

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 6,909 posts
  •  
  • Member #: 24110
  • Joined: 01/16/2007
  • Location:Boise, from St. Louis
  • Handicap:6
  • Ebay ID:MikesChevelle
GolfWRX Likes : 1365

Posted 02 July 2018 - 09:40 AM

Paint first.

Oil wise I usually use gun oil, but I heat the head a bit to allow the oil to soak in a bit better. You could also get it to a more polished level of a finish and torch it...
Titleist 917 D3 9.5 - HZRDUS Yellow 65
Callaway XR Pro 3deep 14 - Project X LZ  
Mizuno MP Fli Hi 18 - C Taper 125
Mizuno MP Fli Hi 23 - C Taper 120                  
Wilson Staff FG62 - S300
Cobra Tour Trusty 52/56/62- S300
Scotty Cameron X7M

My WITB
http://www.golfwrx.c...e/#entry2280019

6

#37 Rory4Pres

Rory4Pres

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 756 posts
  •  
  • Member #: 363997
  • Joined: 02/25/2015
  • Location:Kansas City
  • Handicap:high
GolfWRX Likes : 472

Posted 02 July 2018 - 09:45 AM

Many stressed it I believe but game it for a while first and make sure you love it before investing in the refinish.  

Beware that grip is a counterbalance grip (130g I think) so that will cause your putter head to feel crazy light.  I recommend a grip in the 50-70g range.

7

#38 976-Evil

976-Evil

    Hacker Extraordinaire

  • Advanced Members
  • PipPipPip
  • 86 posts
  •  
  • Member #: 505668
  • Joined: 06/25/2018
  • Location:IFYDKMIGTHTKY
GolfWRX Likes : 21

Posted 02 July 2018 - 10:57 AM

Definitely gonna follow this

8

#39 Twism86

Twism86

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 336 posts
  •  
  • Member #: 500570
  • Joined: 04/30/2018
  • Location:NJ
GolfWRX Likes : 148

Posted 02 July 2018 - 01:19 PM

I would have said to leave it alone as its pretty cool as is but Im excited to see how it comes out.
TM AeroBurner 9.5*
TM SpeedBlades 4-PW
Odyssey White Hot RX #1
A bunch of random wedges

9

#40 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 03 July 2018 - 07:05 AM

Here are the most up to date pictures of the putter head minus the paint and rust.
I just purchased a new grip to replace the winn grip, the grip master roo featherlite oversize grip. Being Aussie i thought it was a nice touch and is very similar to my current grip on my other scotty, SS mid slim 2.0

Attached Thumbnails

  • 20180703_215040.jpg
  • 20180703_214731.jpg
  • 20180703_214755.jpg
  • 20180703_214830.jpg
  • 20180703_214849.jpg
  • 20180703_214924.jpg

Edited by Pesquado, 03 July 2018 - 10:13 PM.


Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


10

#41 976-Evil

976-Evil

    Hacker Extraordinaire

  • Advanced Members
  • PipPipPip
  • 86 posts
  •  
  • Member #: 505668
  • Joined: 06/25/2018
  • Location:IFYDKMIGTHTKY
GolfWRX Likes : 21

Posted 03 July 2018 - 07:28 AM

I can't really tell on this computer but it doesn't look too bad aye?

11

#42 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 03 July 2018 - 07:39 AM

Yeh looks pretty good, small pitting all over, but is really good considering it is over 20 years old!

12

#43 PixlPutterman

PixlPutterman

    Look At My Lefty J33R(hey I can wish)

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 6,909 posts
  •  
  • Member #: 24110
  • Joined: 01/16/2007
  • Location:Boise, from St. Louis
  • Handicap:6
  • Ebay ID:MikesChevelle
GolfWRX Likes : 1365

Posted 03 July 2018 - 10:15 AM

Toss it in the oven at 550F for about 30 minutes, will get a nice dark blue out of it :)
Titleist 917 D3 9.5 - HZRDUS Yellow 65
Callaway XR Pro 3deep 14 - Project X LZ  
Mizuno MP Fli Hi 18 - C Taper 125
Mizuno MP Fli Hi 23 - C Taper 120                  
Wilson Staff FG62 - S300
Cobra Tour Trusty 52/56/62- S300
Scotty Cameron X7M

My WITB
http://www.golfwrx.c...e/#entry2280019

13

#44 vollrathian

vollrathian

    Member

  • Advanced Members
  • PipPipPip
  • 85 posts
  •  
  • Member #: 77325
  • Joined: 03/13/2009
  • Location:west palm beach, fl
GolfWRX Likes : 3

Posted 15 July 2018 - 08:00 PM

you found some buried treasure

14

#45 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 17 July 2018 - 08:14 PM

Doing some paint fill, got to take advantage of the beautiful winter sun in sunny Queensland!

Attached Thumbnails

  • 20180718_110943.jpg


15

#46 T-MAC

T-MAC

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,799 posts
  •  
  • Member #: 220713
  • Joined: 01/09/2013
  • Location:USA
GolfWRX Likes : 1011

Posted 17 July 2018 - 08:37 PM

Nice!
Allow that paint to dry and then wipe off the excess.  It will look nice.
It's basically "raw" carbon steel now so you will have to oil it all the time to keep it from rusting again.  I would have done a gun blue finish on it (like what was described earlier) but you've got it painted now.......
Personally, I prefer to use a food grade or electric grade silicone spray.  CRC makes good ones and can be found on eBay.  I like them over oils because they dry to the touch and won't pick up grass / fertilizers off the green.
DO NOT use WD40.  It has chemicals in it that can eat away the paint that you just spent a bunch of time doing.
Game it well!

16

#47 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 17 July 2018 - 09:04 PM

Everyone said to paint first then blue...
Will the blue ruin the paint job?

17

#48 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 18 July 2018 - 02:37 AM

Finished paintfill....

Im pretty happy with the final result!

Attached Thumbnails

  • 20180718_173330.jpg
  • 20180718_173337.jpg
  • 20180718_173406.jpg


18

#49 23under

23under

    KING

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,230 posts
  •  
  • Member #: 140825
  • Joined: 10/02/2011
  • Location:England
  • Handicap:6
GolfWRX Likes : 574

Posted 18 July 2018 - 03:19 AM

Well saved :)

19

#50 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 18 July 2018 - 11:09 PM

In regards to shafts, what should i use? The one that came with it is not the original shaft and is a piece of sh*t and while the shaft is out i thought i would upgrade and change it at the same time...

I realise this head is of the lighter variety (~330g) and would like to get the best feel from it, what shaft would you suggest?


Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

20

#51 PixlPutterman

PixlPutterman

    Look At My Lefty J33R(hey I can wish)

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 6,909 posts
  •  
  • Member #: 24110
  • Joined: 01/16/2007
  • Location:Boise, from St. Louis
  • Handicap:6
  • Ebay ID:MikesChevelle
GolfWRX Likes : 1365

Posted 18 July 2018 - 11:10 PM

Might as well have some fun and get a UST FF shaft
Titleist 917 D3 9.5 - HZRDUS Yellow 65
Callaway XR Pro 3deep 14 - Project X LZ  
Mizuno MP Fli Hi 18 - C Taper 125
Mizuno MP Fli Hi 23 - C Taper 120                  
Wilson Staff FG62 - S300
Cobra Tour Trusty 52/56/62- S300
Scotty Cameron X7M

My WITB
http://www.golfwrx.c...e/#entry2280019

21

#52 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 10 October 2018 - 10:21 PM

Just thought i would give a little update on the putter, i installed a KBS brushed shaft and played it for a while with only silicone spray and regular wipe downs after rounds and found it started to get small areas of fine rust.
I did not like the look of the rust so sanded it back to remove the dings and nicks and got it sent away to be nickel plated with the brushed look. Here is the result after plating.
I love the look of transluscent blue on the stainless and plated Scotty's so was going to use tamiya x-23 enamel paint on it. What other colours should i use with the transluscent blue on the head? Or should i make all the writing transluscent blue?

Attached Thumbnails

  • 20181011_125053.jpg
  • 20181011_125158.jpg
  • 20181011_125225.jpg

Edited by Pesquado, 11 October 2018 - 05:58 PM.


22

#53 Bushwood Country Club

Bushwood Country Club

    Bushwood Country Club

  • Advanced Members
  • PipPipPipPipPip
  • 769 posts
  •  
  • Member #: 108065
  • Joined: 05/16/2010
  • Handicap:8.8
  • Ebay ID:mtlaurel89
GolfWRX Likes : 311

Posted 10 October 2018 - 10:33 PM

Home run on the nickel plate!  Love the idea of tamiya translucent blue on there
  • TaylorMade M3, HZRDUS Yellow 6.0
  • Callaway Rogue 3 Wood, HZRDUS red, 6.0
  • Callaway Rogue 5 Wood, HZRDUS red, 6.0
  • Callaway Rogue Hybrid 4/21, Graphite Design AD-DI 85
  • Titleist AP3 5,6 , Project X LZ 6.0  
  • Titleist AP2 7-9, Project X LZ 6.0   
  • Vokey SM6 46/8F, 50/12F, 54/10S, 60/12D Project X LZ 6.0
  • Scotty Cameron Delmar

23

#54 uwhockey14

uwhockey14

    Member

  • Advanced Members
  • PipPipPip
  • 168 posts
  •  
  • Member #: 415068
  • Joined: 03/09/2016
  • Location:Madison WI
  • Ebay ID:sjsharks14
GolfWRX Likes : 89

Posted 12 October 2018 - 02:38 PM

I have a similar project I want to work on over the winter... anybody have any tips on how to get a nice polished look on mine without getting it refinished, I have the same putter but a newport two. I have a dremel tool with an assortment of attachments. anybody have any advise on polishes and attachments to use to get this putter looking better. I bought it off a buddy for really cheap. i'll post some photo's later when I get a chance but any tips on how to get this polished up would be appreciated. Thanks ya'll
Titleist 913D2/D3 (8.5) Stiff Diamana
Titleist 910 F (13.5) Stiff (5-Wood Length Diamana)
Cobra Multi-Metal Hybrid Iron 22* Stiff
Titleist 681 4-PW (Project X 5.5)
Taylor Made RAC TP (52,56,60)
Taylor Made RAC TP (54,58) Black
Cobra Greg Norman (U-Model) Putter "Boss of the moss"
Ping Hoofer (Wisconsin Badgers)
Driver Cover (Black Lab)
3-Wood Cover (USA knit pom pom)
Putter Cover (Team USA 2016 Ryder Cup)

24

#55 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 13 October 2018 - 12:09 AM

I just finished the paint fill! I still need to wait for the paint to cure a bit more before i do a proper clean up, but its looking amazing! I cant wait to finish it and get it out on the course!

Attached Thumbnails

  • 20181013_145622.jpg
  • 20181013_145929.jpg
  • 20181013_145801.jpg
  • 20181013_145545.jpg


25

#56 T-MAC

T-MAC

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,799 posts
  •  
  • Member #: 220713
  • Joined: 01/09/2013
  • Location:USA
GolfWRX Likes : 1011

Posted 18 October 2018 - 08:23 PM

Turned out nice.  I love Trans Blue on a silver background.
Have you weighed the head lately?  Just wondering what it weighs now.

26

#57 GolfGuitarsCars

GolfGuitarsCars

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 440 posts
  •  
  • Member #: 401376
  • Joined: 10/31/2015
  • Location:Texas
  • Ebay ID:wcmallett
GolfWRX Likes : 311

Posted 18 October 2018 - 09:03 PM

Do you wear sunglasses on the course?  The glare off that thing is going to be blinding.

Edited by GolfGuitarsCars, 18 October 2018 - 09:04 PM.

PING G30 SF Tec 12* (Set to + 1*)
PING G SF Tec 5W
Taylormade Rescue Dual 19*
Taylormade Rescue Mid 22*
Mizuno JPX 900 Hot Metal 5-GW
Cleveland 588 RTX 2.0  54*/58*
Scotty Cameron Pro Platinum Newport Mil-Spec 34" 340g
2016 PING Hoofer

27

#58 KaTooM

KaTooM

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 935 posts
  •  
  • Member #: 130992
  • Joined: 06/18/2011
  • Location:Woodway, Texas
GolfWRX Likes : 69

Posted 19 October 2018 - 02:27 PM

Came out really nice! Amazed at the transformation!

28

#59 Pesquado

Pesquado

    Rookie

  • Members
  • PipPip
  • 51 posts
  •  
  • Member #: 503550
  • Joined: 06/02/2018
  • Location:QLD
  • Handicap:7
GolfWRX Likes : 16

Posted 19 October 2018 - 09:06 PM

Im pretty happy with it! The trans blue looks amazing! Considering how it looked when i first purchased it!
I will be wearing sunnies when i play, always have and always will. So the shine wont affect me.
I will weigh the head when i get the chance, the head was 332g before i got it nickel plated...

29

#60 Rob McHugh

Rob McHugh

    Rob

  • ClubWRX Charter Members
  • 810 posts
  •  
  • Member #: 374619
  • Joined: 05/05/2015
  • Location:Sydney, Australia
  • Handicap:13
  • Ebay ID:putternut
GolfWRX Likes : 966

Posted 22 October 2018 - 07:23 PM

Well done mate!!

happy to see your project come to fruition and that is a lovely old putter. Take TMAC's advice and never go near WD40 again! Get some food or electrical grade silicon and give it a spray and a wipe down after every round and it will see you in good stead. :-)

Rob


Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

30



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

GolfWRX Sponsors