Jump to content

Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with members, access to all forums and eligiblility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

- - - - -

Tiger Woods' new T/M wedges - shot @ 2018 US Open


50 replies to this topic

#1 GolfWRX

GolfWRX

    Team GolfWRX

  • Marshals
  • 7,859 posts
  •  
  • Member #: 14
  • Joined: 04/01/2005

Posted 12 June 2018 - 06:43 AM

Posted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted ImagePosted Image


Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


1

#2 king6

king6

    Member

  • Advanced Members
  • PipPipPip
  • 155 posts
  •  
  • Member #: 5537
  • Joined: 08/26/2005
GolfWRX Likes : 1

Posted 12 June 2018 - 11:50 AM

The 60* looks like a vokey l-grind to me!

2

#3 swgolf12

swgolf12

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 636 posts
  •  
  • Member #: 140687
  • Joined: 10/01/2011
  • Ebay ID:officialgolfguru
GolfWRX Likes : 286

Posted 12 June 2018 - 12:31 PM

Interesting that someone mentioned TM gave him wedges with blank faces to have the grooves cut into, and that the faces of his wedges look like someone took a groove sharpener to with the scratching extending from each groove out onto the toe.
M3 440 Kiyoshi Black 75
R15 3HL 869 Tour Spec 4.0
Vapor Fly Pro 3 Aldila RIP 115 Tour
Titleist T-MB 4 TIX100 HS1X
VR Forged 5-9 X7
Nike VR Forged 48* X7
SSC Don White Grind 53/58 S400
PM Grind 64 PX 7.0
Studio Design 1.5 Circle T/Scotty Fastback 1.5/Scotty Catalina Two Welded Neck

3

#4 CallawayLefty

CallawayLefty

    Major Winner

  • Lefty Boomers
  • PipPipPipPipPipPip
  • 1,886 posts
  •  
  • Member #: 95918
  • Joined: 10/05/2009
GolfWRX Likes : 1080

Posted 12 June 2018 - 12:32 PM

56 = Artisan.  Qmany has that same grind on his 60 and it makes me get all warm and fuzzy every time I see it.  I'm all about that shallow bevel.  Praying that Artisan ends up with lefty heads!!!!

4

#5 mackepa

mackepa

    #TheWRX

  • Advanced Members
  • PipPipPipPipPipPip
  • 2,926 posts
  •  
  • Member #: 38775
  • Joined: 09/04/2007
  • Location:Cincinnati, Ohio
GolfWRX Likes : 2375

Posted 12 June 2018 - 01:32 PM

View Postswgolf12, on 12 June 2018 - 12:31 PM, said:

Interesting that someone mentioned TM gave him wedges with blank faces to have the grooves cut into, and that the faces of his wedges look like someone took a groove sharpener to with the scratching extending from each groove out onto the toe.

That’s definitely not what those lines are from. Every raw wedge I’ve ever owned has had marks like that from bunker shots

#TheWRX 12/11/16


2018 WITB LINK. http://www.golfwrx.c...-in-first-post/

Rogue SZ 9* AD TP 8

Rogue SZ 15* AD IZ 8

Honma 737 Tour World U19c AD DI 85g

X Forged UT 24* (23*) KBS PROTO HYB 95s

X Forged 18 5-PW KBS $-Taper Prototypes

MD4 Raw 52s, 56s (55*), 60x (59*) KBS $-Taper



Toulon Austin Longneck Garage


5

#6 seve1972

seve1972

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 995 posts
  •  
  • Member #: 124438
  • Joined: 03/13/2011
  • Handicap:0
GolfWRX Likes : 327

Posted 12 June 2018 - 01:49 PM

Those tour velvet cords look nothing like the ones I get :).....  I wish they would release these....(ones with less cord)..

6

#7 Exzakly

Exzakly

    Advanced

  • ClubWRX Charter Members
  • 316 posts
  •  
  • Member #: 58044
  • Joined: 06/15/2008
  • Handicap:6.5
GolfWRX Likes : 141

Posted 12 June 2018 - 02:29 PM

Artisan does have lefty heads. Will be released later this year to the gen public. I had MT make one for my buddy.
TM M3 8.5* w/Tensei Orange
TM M4 3 Wood w/Diamana D+ LTD
TM M4 5 Wood w/Diamana D+ LTD
TM P790 4-PW w/KBS Tour FLT
Artisan "MT" 50*
Artisan "MT" 56*
Artisan "MT" 60*
Artisan 0117 "Mid Mill" Putter
Bridgestone Tour B XS

7

#8 ignitewvu

ignitewvu

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,925 posts
  •  
  • Member #: 3869
  • Joined: 07/30/2005
GolfWRX Likes : 323

Posted 12 June 2018 - 02:33 PM

Those arn't TaylorMade Wedges those are Mike Taylor Wedges...........PERIOD.

I 100% agree with the guy who said TM sent Blanks to Artisan.......
M3 440 9 Mitsubishi Tensei CK Pro White 60 Stiff
M1 15 3 Wood Mitsubishi Diamana B80 Stiff
M1 19 Hybrid Matrix Altus HYBRID Stiff
TM SLDR 4i @ 39" DGSLS300
Bridgestone J40CB 5-PW Tour Concept S3
Callaway Mack Daddy 2 TG 52, 56 & 60 DGS300
Scotty Cameron Select SquareBack 34"
Bridgestone Tour B XS

8

#9 GoIrish17

GoIrish17

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,913 posts
  •  
  • Member #: 157931
  • Joined: 01/26/2012
  • Location:Cuyahoga Falls, OH
  • Handicap:8
  • Ebay ID:bschultz0170
GolfWRX Likes : 3729

Posted 12 June 2018 - 03:25 PM

View Postmackepa, on 12 June 2018 - 01:32 PM, said:

View Postswgolf12, on 12 June 2018 - 12:31 PM, said:

Interesting that someone mentioned TM gave him wedges with blank faces to have the grooves cut into, and that the faces of his wedges look like someone took a groove sharpener to with the scratching extending from each groove out onto the toe.

That’s definitely not what those lines are from. Every raw wedge I’ve ever owned has had marks like that from bunker shots

Beat me to it.

I wish TM would release that grind on his 60° in their lob wedges.
Driver: TaylorMade M2 ('17) 10.5° UST Platinum Proto
Fairway: TI Aeroburner TP 15° Diamana D+ 70 Limited
Fairway: TI Aeroburner TP 18° (19.5° small head) Red Tie 8Q3
Hybrid: Adams Pro Mini 23° OG Ozik Altus
Irons: Srixon 545 5-pw Recoil 110
Wedges: Cleveland RTX 2.0 raw 48
°, 54°, 58° KBS 610 125
Putter: Tad Moore Pro 1S prototype
Putter: Scotty AOP Newport oil can
Putter: Piretti Potenza II black

WITB: http://www.golfwrx.c...sh17s-new-witb/

9

#10 2putttom

2putttom

    # 1 Oregon Duck fan

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 9,229 posts
  •  
  • Member #: 177144
  • Joined: 04/24/2012
  • Location:N.California, LInks @ Bodega Bay
  • Handicap:12
GolfWRX Likes : 5320

Posted 12 June 2018 - 04:16 PM

those wear marks are a groove to high ....tighten it up Tiger..lol

Tour Exotics E 10 15*
Srixon 785's  w/G P MCC plus 4
Mizuno T 7 52 MP T7 56 &60
Bobby Grace SNYPER II   46"
Oregon Ducks Bag

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


10

#11 nogamejames

nogamejames

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 943 posts
  •  
  • Member #: 86437
  • Joined: 06/23/2009
  • Location:Bay area California
  • Ebay ID:jamesa666666
GolfWRX Likes : 222

Posted 12 June 2018 - 05:42 PM

Maybe TM will do this but they would make a pile of money if they released a TW grind milled wedge. Even if it was just a 60 Degree, money being left on the table.

Edited by nogamejames, 12 June 2018 - 05:42 PM.

WITB:
Driver: Ping G400 Max 9* Matrix 8M3
3 Wood: TM 16 M2 13* Diamana Thump 75
4-7 Wood: Cobra F6 Baffler 19* PX Evenflow
4 Iron: TM RSI TP UDI Aldila Rip'd VS Proto
5-PW: Bridgestone J15DF KBS C-Taper
50,56,60: Callaway MD3, Vokey TVD, Mizuno T7
Putter: Method 003, Bettinardi Queen B7

11

#12 mctrees02

mctrees02

    Major Winner

  • Lefty Boomers
  • PipPipPipPipPipPip
  • 1,072 posts
  •  
  • Member #: 116510
  • Joined: 10/22/2010
  • Location:Dallas, TX
  • Handicap:5ish
  • Ebay ID:mctrees02
GolfWRX Likes : 313

Posted 12 June 2018 - 05:51 PM

View Postnogamejames, on 12 June 2018 - 05:42 PM, said:

Maybe TM will do this but they would make a pile of money if they released a TW grind milled wedge. Even if it was just a 60 Degree, money being left on the table.
considering it’s not their grind, they would have to pay Artisan to do the heavy lifting

12

#13 TheMoneyShot

TheMoneyShot

    ***FIGJAM/Twirl of Doom***

  • Advanced Members
  • PipPipPipPipPipPipPipPip
  • 28,254 posts
  •  
  • Member #: 40503
  • Joined: 10/06/2007
GolfWRX Likes : 3793

Posted 12 June 2018 - 06:02 PM

TW grinds.  Release the beasts!!!!

13

#14 TinkerGolfMan

TinkerGolfMan

    Tinker Golf Man

  • Advanced Members
  • PipPipPipPipPip
  • 891 posts
  •  
  • Member #: 332457
  • Joined: 08/08/2014
GolfWRX Likes : 314

Posted 12 June 2018 - 06:12 PM

Is this a Mike Taylor situation?
TaylorMade 2017 M1 9.5°, Mitsubishi Chemical Tensei CK Blue, Golf Pride MCC Plus 4
TaylorMade 2017 M2 3 Wood Fairway 15°, Aldila Rogue 125 Tour Edition, Golf Pride MCC Plus 4
Nike Golf Vapor Speed 5 Wood Fairway 19°, Fujikura 73 Tour Spec, Golf Pride MCC Plus 4
Nike Golf MM Proto [PROTOTYPE] 4-PW Irons Set# 4 of 40, True Temper Dynamic Gold S400 Limited Edition (Superman Edition), Golf Pride MCC Plus 4
Artisan Golf ★ custom 50°, Nippon Modus 120 Wedge, Golf Pride MCC Plus 4
Artisan Golf ★ custom 54°, Nippon Modus 120 Wedge, Golf Pride MCC Plus 4
Artisan Golf ★ custom 58°, Nippon Modus 120 Wedge, Golf Pride MCC Plus 4
Titleist Scotty Cameron 2016 Select Newport 2, SC Custom Shop work: Black Refinish, High-Buff shaft band, Yellow School Bus SC Matador, Face/Weight Stamps.

14

#15 CallawayLefty

CallawayLefty

    Major Winner

  • Lefty Boomers
  • PipPipPipPipPipPip
  • 1,886 posts
  •  
  • Member #: 95918
  • Joined: 10/05/2009
GolfWRX Likes : 1080

Posted 12 June 2018 - 06:19 PM

View PostTinkerGolfMan, on 12 June 2018 - 06:12 PM, said:

Is this a Mike Taylor situation?

As noted above, the grind on the 56 is unmistakably Mike Taylor, so I would assume all the rest are as well.  It's the coolest grind I've ever seen.  I'll be showing up in Ft. Worth the minute they tell me they'll allow me to.


15

#16 1jcwallace

1jcwallace

    Member

  • ClubWRX Charter Members
  • 105 posts
  •  
  • Member #: 140201
  • Joined: 09/28/2011
  • Location:Newnan, Ga
  • Ebay ID:jdriver2908
GolfWRX Likes : 34

Posted 12 June 2018 - 06:38 PM

It's still crazy to me that he jumps from a PW to a 56 and then to 60 with nothing in between the PW and 56. It also baffles me he plays so much bounce but then again, those grinds are truly amazing so.... I would also have to agree those are Mike Taylor wedges with some TM stamping on them.
TM (17) M2 9.5 AD GP 6s
TM (17) M2 Tour 15 AD GP 7s
TITLEIST 915H 18 AD DI 8s
SRIXON 545 PW-4
VOKEY SM7 RAW 52F 08/ 56S 10
CALLAWAY PM 60
CAMERON NEWPORT 2
PRO V1X

16

#17 Diamana_Stinger

Diamana_Stinger

    Member

  • Advanced Members
  • PipPipPip
  • 222 posts
  •  
  • Member #: 353
  • Joined: 04/26/2005
  • Location:Vancouver, B.C. Canada
  • Handicap:+3.2
GolfWRX Likes : 27

Posted 12 June 2018 - 06:45 PM

View Post1jcwallace, on 12 June 2018 - 06:38 PM, said:

It's still crazy to me that he jumps from a PW to a 56 and then to 60 with nothing in between the PW and 56. It also baffles me he plays so much bounce but then again, those grinds are truly amazing so.... I would also have to agree those are Mike Taylor wedges with some TM stamping on them.

I am pretty sure Tiger's PW is 50* so really only a 6* gap to the SW.
Baldo TTX 420 10* - Tensei Pro Orange V2 70TX
A Grind FW #3 14* - Tensei Pro Orange 90TX
Buchi VS200 3iron
Kyoei MB 4-PW
(Nippon LSL Proto X Flex in 3-PW)
Wedge Rotation; Crazy, A Grind, GrindStudio, Modart, CGS-Orion, SDJ 115
(Shimada Tour Wedge Black Shaft)
(DG Onyx Black Tour Issue DGS400)
Benock Okuda Putter (JSS/SUS316L) 009 head shape
Elite Y360*SH Black/Black
Elite Geron Type N2 Putter Black

17

#18 1jcwallace

1jcwallace

    Member

  • ClubWRX Charter Members
  • 105 posts
  •  
  • Member #: 140201
  • Joined: 09/28/2011
  • Location:Newnan, Ga
  • Ebay ID:jdriver2908
GolfWRX Likes : 34

Posted 12 June 2018 - 06:47 PM

View PostDiamana_Stinger, on 12 June 2018 - 06:45 PM, said:

View Post1jcwallace, on 12 June 2018 - 06:38 PM, said:

It's still crazy to me that he jumps from a PW to a 56 and then to 60 with nothing in between the PW and 56. It also baffles me he plays so much bounce but then again, those grinds are truly amazing so.... I would also have to agree those are Mike Taylor wedges with some TM stamping on them.

I am pretty sure Tiger's PW is 50* so really only a 6* gap to the SW.
Yes, I think I have read where his lofts are soft of standard...Yet he still smashes it. Just Crazy!
TM (17) M2 9.5 AD GP 6s
TM (17) M2 Tour 15 AD GP 7s
TITLEIST 915H 18 AD DI 8s
SRIXON 545 PW-4
VOKEY SM7 RAW 52F 08/ 56S 10
CALLAWAY PM 60
CAMERON NEWPORT 2
PRO V1X

18

#19 Pigems

Pigems

    Hall of Fame

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 8,425 posts
  •  
  • Member #: 246559
  • Joined: 04/21/2013
  • Location:Halifax, NS
  • Handicap:8.8
  • Ebay ID:Piggems
GolfWRX Likes : 17435

Posted 12 June 2018 - 06:57 PM

Those are some well used “New” wedges, I think Tiger needs to start a BST dispute thread. ;)

Edited by Pigems, 12 June 2018 - 06:57 PM.

910D2 9.5*- RIP Alpha 70x
910f 17*- Diamana D+ 82x
910h 20* Hybrid - S400
712 CB 4i-Pw - S300
SM5 51*, 55*- S300
TVD 59* M - S300
Studio Select NP2

19

#20 Valtiel

Valtiel

    Trap Draw

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,420 posts
  •  
  • Member #: 150887
  • Joined: 12/12/2011
  • Location:Scotts Valley, CA
  • Handicap:1.7
GolfWRX Likes : 1151

Posted 12 June 2018 - 07:08 PM

View Post1jcwallace, on 12 June 2018 - 06:47 PM, said:

View PostDiamana_Stinger, on 12 June 2018 - 06:45 PM, said:

View Post1jcwallace, on 12 June 2018 - 06:38 PM, said:

It's still crazy to me that he jumps from a PW to a 56 and then to 60 with nothing in between the PW and 56. It also baffles me he plays so much bounce but then again, those grinds are truly amazing so.... I would also have to agree those are Mike Taylor wedges with some TM stamping on them.

I am pretty sure Tiger's PW is 50* so really only a 6* gap to the SW.
Yes, I think I have read where his lofts are soft of standard...Yet he still smashes it. Just Crazy!

Yeah Tiger has always been either a 49* or 50* PW guy. I have the same 6* gap between my 48* PW and 54* SW. Tiger has said that he prefers manufacturing all kinds of different shots with his PW as opposed to adding another club in there so it makes sense.

Posted Image M1 430 8.5* Tensei Pro Orange V2 70TX || Posted Image 915D3 8.5* Diamana Kai'li 80x
  Posted Image  XHot 3Deep Pro 14.5* Fujikura Motore VC 8.3 Tour Spec X
| | Posted Image SQ2 13* Diamana Blueboard 83x
Posted Image Tour Issue SQ2 17* Diamana Blueboard 103x || Posted Image SQ2 15* Diamana Blueboard 93x
Posted Image Anser 20* Aldila Rogue Black 110MSI 105h Tour-X || Posted Image V-Steel 21* Project X Rifle Satin 6.5
Posted Image MP-H4 3i 21* Project X PXi 7.0
Posted Image MP-H4 4i 24* Project X PXi 7.0

Posted Image MP-59 4i-PW 27*- 48* Brunswick Precision Rifle FCM 7.0
Posted Image Mild Raw 8620 54* Brunswick Precision Rifle FCM 7.0
Posted Image  SM6 58* Oil Can Low Bounce K-Grind
Brunswick Precision FCM 7.3 SSx1
Posted Image Special 62* Black Oxide V-Grind Brunswick Precision FCM 7.3 SSx2
Posted Image Santa Fe Bullseye shaft
                                                             WITB Thread

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

20

#21 1jcwallace

1jcwallace

    Member

  • ClubWRX Charter Members
  • 105 posts
  •  
  • Member #: 140201
  • Joined: 09/28/2011
  • Location:Newnan, Ga
  • Ebay ID:jdriver2908
GolfWRX Likes : 34

Posted 12 June 2018 - 07:51 PM

 Pigems, on 12 June 2018 - 06:57 PM, said:

Those are some well used "New" wedges, I think Tiger needs to start a BST dispute thread. ;)
Loves the profile pic. Coors Lights....Golf PED's.

 Valtiel, on 12 June 2018 - 07:08 PM, said:

 1jcwallace, on 12 June 2018 - 06:47 PM, said:

 Diamana_Stinger, on 12 June 2018 - 06:45 PM, said:

 1jcwallace, on 12 June 2018 - 06:38 PM, said:

It's still crazy to me that he jumps from a PW to a 56 and then to 60 with nothing in between the PW and 56. It also baffles me he plays so much bounce but then again, those grinds are truly amazing so.... I would also have to agree those are Mike Taylor wedges with some TM stamping on them.

I am pretty sure Tiger's PW is 50* so really only a 6* gap to the SW.
Yes, I think I have read where his lofts are soft of standard...Yet he still smashes it. Just Crazy!

Yeah Tiger has always been either a 49* or 50* PW guy. I have the same 6* gap between my 48* PW and 54* SW. Tiger has said that he prefers manufacturing all kinds of different shots with his PW as opposed to adding another club in there so it makes sense.
Yes. I guess if anyone can, it would be him.
TM (17) M2 9.5 AD GP 6s
TM (17) M2 Tour 15 AD GP 7s
TITLEIST 915H 18 AD DI 8s
SRIXON 545 PW-4
VOKEY SM7 RAW 52F 08/ 56S 10
CALLAWAY PM 60
CAMERON NEWPORT 2
PRO V1X

21

#22 Dizz

Dizz

    J.W.

  • Advanced Members
  • PipPipPipPipPipPipPipPip
  • 11,450 posts
  •  
  • Member #: 32437
  • Joined: 06/21/2007
GolfWRX Likes : 2339

Posted 12 June 2018 - 10:37 PM

 seve1972, on 12 June 2018 - 01:49 PM, said:

Those tour velvet cords look nothing like the ones I get :).....  I wish they would release these....(ones with less cord)..

Golf Pride used to call them “tour buffs”... they’re amazing grips.  When I was in the golf business my rep used to get these and the Victory Cord grips for me whenever I would run low.  That was back before they brought out the Victory Cord again in a limited release like they did 1-2 years ago... at that time they were only making small amounts for Vijay and a couple other big time players that still requested them.  The Golf Pride Tour Velvet Cord “tour buffs” were perfect though- they basically felt like a Tour Velvet with just enough cord to give you some extra grab.

I had 5 of them left over one year that I wasn’t gonna use because I started playing the Victory Cord again and I listed them for sale on here... 5 brand new never installed “tour buffs” for $35 and someone said they’d take them in literally seconds.  That person didn’t pay and I told him right away that if he didn’t pay in a timely manner that I was gonna go to the next person in line... well I ended up having several people offer me $100 for the 5 grips once I told them they were already sold pending payment.  Wild.

Edited by Dizz, 12 June 2018 - 10:38 PM.

G400 Max (9)- HZRDUS Yellow 75
X-Forged UT (#3- 21)- DG X700
716MB (5-PW)- DG S400
Vokey (TVD SM7 RAW 52 & SM6 RAW 58)- DG S400
Cameron Napa California @ 34"

22

#23 Lesmond

Lesmond

    Legend

  • Advanced Members
  • PipPipPipPipPipPipPipPip
  • 10,233 posts
  •  
  • Member #: 183986
  • Joined: 06/01/2012
  • Location:The Bay Area, CA
GolfWRX Likes : 6864

Posted 12 June 2018 - 10:53 PM

Nice. Thanks for the pics.
TaylorMade M3 Driver 9.5*
TaylorMade M3 FWY 15*
TaylorMade M2 FWY 18*

Titleist 718 T-MB 4
Titleist 718 AP2 5-PW
Vokey SM7 50*, Vokey SM6 54*, TaylorMade Hi-Toe 58*
Nike Method Prototype 006 Rory
Posted Image

23

#24 Jc0

Jc0

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,749 posts
  •  
  • Member #: 119066
  • Joined: 12/17/2010
  • Location:Tucson
  • Handicap:0
GolfWRX Likes : 256

Posted 12 June 2018 - 11:03 PM

 CallawayLefty, on 12 June 2018 - 06:19 PM, said:

 TinkerGolfMan, on 12 June 2018 - 06:12 PM, said:

Is this a Mike Taylor situation?

As noted above, the grind on the 56 is unmistakably Mike Taylor, so I would assume all the rest are as well.  It's the coolest grind I've ever seen.  I'll be showing up in Ft. Worth the minute they tell me they'll allow me to.

I don't think these are technically Artisan grinds because they still have the mill marks on the sole. It almost looks like TM either sent a wedge to them or took one of Tigers old wedges, laser scanned it, and had the grind milled onto their wedge.

24

#25 DTown3011

DTown3011

    #DTown3011

  • ClubWRX Charter Members
  • 3,232 posts
  •  
  • Member #: 59636
  • Joined: 07/05/2008
  • Location:Colorado
GolfWRX Likes : 1297

Posted 12 June 2018 - 11:51 PM

 Jc0, on 12 June 2018 - 11:03 PM, said:

 CallawayLefty, on 12 June 2018 - 06:19 PM, said:

 TinkerGolfMan, on 12 June 2018 - 06:12 PM, said:

Is this a Mike Taylor situation?

As noted above, the grind on the 56 is unmistakably Mike Taylor, so I would assume all the rest are as well.  It's the coolest grind I've ever seen.  I'll be showing up in Ft. Worth the minute they tell me they'll allow me to.

I don't think these are technically Artisan grinds because they still have the mill marks on the sole. It almost looks like TM either sent a wedge to them or took one of Tigers old wedges, laser scanned it, and had the grind milled onto their wedge.

They aren’t Artisan grinds.  You can’t grind mill marks into a wedge.  TaylorMade took Mike Taylor’s work, put into into CAD and milled the grinds on a CNC machine.  The great news is the grinds are repeatable time and time again for whenever he wants replacements.

Also, I don’t understand why people are so in love with these grinds when they fit Tiger and may not fit you.  The 56 is a fairly standard trailing edge ribbon with heel relief and a beveled leading edge.  Now I’d certainly be enamored with whatever grinds Mike Taylor fit me personally with if I had a chance to work with him, but falling in love with someone else’s grinds you’ve never even hit just based on looks (let alone Tigers!) is silly at best.

Rogue 10.5* MRC Tensei CK Pro Blue 60S
Rogue SZ 15* MRC Tensei CK Pro Blue 70S
Rogue 3h 19* KBS Hybrid Prototype 85S
Apex '14 #4-PW KBS Tour 120 Matte Black
MD4 Raw 50-S/56-X/60-S KBS 610 120
Odyssey MXM-V #7 "Tank" @ 38"
Callaway '18 Chrome Soft X Truvis

25

#26 bladehunter

bladehunter

    I have a great profile! Especially from the side !

  • Advanced Members
  • PipPipPipPipPipPipPipPip
  • 19,466 posts
  •  
  • Member #: 291449
  • Joined: 01/12/2014
  • Location:south carolina
  • Handicap:NONE
GolfWRX Likes : 18066

Posted 13 June 2018 - 07:44 AM

 DTown3011, on 12 June 2018 - 11:51 PM, said:

 Jc0, on 12 June 2018 - 11:03 PM, said:

 CallawayLefty, on 12 June 2018 - 06:19 PM, said:

 TinkerGolfMan, on 12 June 2018 - 06:12 PM, said:

Is this a Mike Taylor situation?

As noted above, the grind on the 56 is unmistakably Mike Taylor, so I would assume all the rest are as well.  It's the coolest grind I've ever seen.  I'll be showing up in Ft. Worth the minute they tell me they'll allow me to.

I don't think these are technically Artisan grinds because they still have the mill marks on the sole. It almost looks like TM either sent a wedge to them or took one of Tigers old wedges, laser scanned it, and had the grind milled onto their wedge.

They aren’t Artisan grinds.  You can’t grind mill marks into a wedge.  TaylorMade took Mike Taylor’s work, put into into CAD and milled the grinds on a CNC machine.  The great news is the grinds are repeatable time and time again for whenever he wants replacements.

Also, I don’t understand why people are so in love with these grinds when they fit Tiger and may not fit you.  The 56 is a fairly standard trailing edge ribbon with heel relief and a beveled leading edge.  Now I’d certainly be enamored with whatever grinds Mike Taylor fit me personally with if I had a chance to work with him, but falling in love with someone else’s grinds you’ve never even hit just based on looks (let alone Tigers!) is silly at best.

I think you are correct on the process. But you never know who owns that cad program.  They maybe artisan on rent to TM.  

Heck. It wouldn’t shock me to know that artisan had the capability to mill these themselves.
Callaway Rogue 9.8 Tour issue Rogue Black 80TX  playing at 43 1/4
17 M1 14.5  Tour issue Graphite Design   AD DI 8X
Bridgestone Tour B-XH 18 Graphite Design AD DI 105X
Ping i500 4-pw Modus 130X
Vokey Tour issue raw SM6   50 f  54  60 M  Modus 130S
Cameron GSS 1.5 009  Vertical stamp , tungsten sole weights

hows that for brand loyalty??

26

#27 jonn443

jonn443

    Jonnystx

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,383 posts
  •  
  • Member #: 104882
  • Joined: 03/16/2010
  • Location:CT
GolfWRX Likes : 986

Posted 13 June 2018 - 07:49 AM

 bladehunter, on 13 June 2018 - 07:44 AM, said:

 DTown3011, on 12 June 2018 - 11:51 PM, said:

 Jc0, on 12 June 2018 - 11:03 PM, said:

 CallawayLefty, on 12 June 2018 - 06:19 PM, said:

 TinkerGolfMan, on 12 June 2018 - 06:12 PM, said:

Is this a Mike Taylor situation?

As noted above, the grind on the 56 is unmistakably Mike Taylor, so I would assume all the rest are as well.  It's the coolest grind I've ever seen.  I'll be showing up in Ft. Worth the minute they tell me they'll allow me to.

I don't think these are technically Artisan grinds because they still have the mill marks on the sole. It almost looks like TM either sent a wedge to them or took one of Tigers old wedges, laser scanned it, and had the grind milled onto their wedge.

They aren’t Artisan grinds.  You can’t grind mill marks into a wedge.  TaylorMade took Mike Taylor’s work, put into into CAD and milled the grinds on a CNC machine.  The great news is the grinds are repeatable time and time again for whenever he wants replacements.

Also, I don’t understand why people are so in love with these grinds when they fit Tiger and may not fit you.  The 56 is a fairly standard trailing edge ribbon with heel relief and a beveled leading edge.  Now I’d certainly be enamored with whatever grinds Mike Taylor fit me personally with if I had a chance to work with him, but falling in love with someone else’s grinds you’ve never even hit just based on looks (let alone Tigers!) is silly at best.

I think you are correct on the process. But you never know who owns that cad program.  They maybe artisan on rent to TM.  

Heck. It wouldn’t shock me to know that artisan had the capability to mill these themselves.

Exactly... and let's not forget that the MT (Artisan) stamp is on not one but BOTH wedges.
AB TP 10.5*/ DI6X
AB TP 3HL / 757
XTD 19*/ Fubuki Ax
DWS 24*/ VS Proto
J15 CB 5-PW/ Modus 3 125S
X-Forged MD (50*, 56* 60*)
Spider Si/ SS Mid SLim 2.0

27

#28 kcsf

kcsf

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 547 posts
  •  
  • Member #: 357935
  • Joined: 01/14/2015
  • Location:Santa Fe, NM
  • Handicap:6
GolfWRX Likes : 403

Posted 13 June 2018 - 08:34 AM

 mctrees02, on 12 June 2018 - 05:51 PM, said:

 nogamejames, on 12 June 2018 - 05:42 PM, said:

Maybe TM will do this but they would make a pile of money if they released a TW grind milled wedge. Even if it was just a 60 Degree, money being left on the table.
considering it's not their grind, they would have to pay Artisan to do the heavy lifting

I'm not sure I follow your statement. Why couldn't TM just offer these milled to the public?
G400 Green Mamba 60TX
Taylormade M2 Tour HL 3w Hzrdus Red 6.0
Ping i500 irons
Edel 50* & 56* wedges
TP Mills Nellie; O-Works #7s red

28

#29 QuigleyDU

QuigleyDU

    Hall of Fame

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 5,515 posts
  •  
  • Member #: 62095
  • Joined: 08/01/2008
  • Location:reno nv
  • Ebay ID:reederc2
GolfWRX Likes : 1604

Posted 13 June 2018 - 08:42 AM

I think you are correct on the process. But you never know who owns that cad program. They maybe artisan on rent to TM. Heck. It wouldn’t shock me to know that artisan had the capability to mill these themselves.  Exactly... and let's not forget that the MT (Artisan) stamp is on not one but BOTH wedges.

lets also not forget that anyone with a decent milling machine and software could do this. You guys all act like there is only one person in the world that know how to grind a wedge.... jeez.
driver: SRIXON Z745
fairway: NIKE VAPOR 13*
3-4 IRON: MIZZY MP H5 GD AMT X100.
5-PW IRONS: MP5 DG AMT X100
WEDGES; CLEVELAND rtx 3.0 RAW
PUTTER; PING SIGMA G SHEA H
BALL; various, ask me that day.

29

#30 Dizz

Dizz

    J.W.

  • Advanced Members
  • PipPipPipPipPipPipPipPip
  • 11,450 posts
  •  
  • Member #: 32437
  • Joined: 06/21/2007
GolfWRX Likes : 2339

Posted 13 June 2018 - 08:53 AM

 DTown3011, on 12 June 2018 - 11:51 PM, said:

 Jc0, on 12 June 2018 - 11:03 PM, said:

 CallawayLefty, on 12 June 2018 - 06:19 PM, said:

 TinkerGolfMan, on 12 June 2018 - 06:12 PM, said:

Is this a Mike Taylor situation?

As noted above, the grind on the 56 is unmistakably Mike Taylor, so I would assume all the rest are as well.  It's the coolest grind I've ever seen.  I'll be showing up in Ft. Worth the minute they tell me they'll allow me to.

I don't think these are technically Artisan grinds because they still have the mill marks on the sole. It almost looks like TM either sent a wedge to them or took one of Tigers old wedges, laser scanned it, and had the grind milled onto their wedge.

They aren’t Artisan grinds.  You can’t grind mill marks into a wedge.  TaylorMade took Mike Taylor’s work, put into into CAD and milled the grinds on a CNC machine.  The great news is the grinds are repeatable time and time again for whenever he wants replacements.

Also, I don’t understand why people are so in love with these grinds when they fit Tiger and may not fit you.  The 56 is a fairly standard trailing edge ribbon with heel relief and a beveled leading edge.  Now I’d certainly be enamored with whatever grinds Mike Taylor fit me personally with if I had a chance to work with him, but falling in love with someone else’s grinds you’ve never even hit just based on looks (let alone Tigers!) is silly at best.

I’m glad you said it, I was thinking the same thing.  I know people go crazy for Tiger’s gear but that grind is pretty much as basic as possible.  Hell there are several retail wedges out there with something very similar.  It’s like people just have to have “tour issue” even if it’s just retail stuff that’s given to a tour player.

G400 Max (9)- HZRDUS Yellow 75
X-Forged UT (#3- 21)- DG X700
716MB (5-PW)- DG S400
Vokey (TVD SM7 RAW 52 & SM6 RAW 58)- DG S400
Cameron Napa California @ 34"

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

30



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

GolfWRX Sponsors