Jump to content

Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with members, access to all forums and eligiblility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

* * * * * 2 votes

Aldila SYNERGY TOUR BLACK.....The Low Spin King. Trackman Data Inside.

aldila tour tour only trackman low spin graphene

182 replies to this topic

#1 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 01 November 2017 - 11:48 AM

Ok, here is the finished Tour Proto version of Aldila's new Tour Only SYNERGY shaft. Below you will see Trackman data against the two lowest spin shafts that we have tested, that didn't hit 6 feet off the ground or feel like a telephone pole. As you can see, the Synergy is launching the same or higher, with incredibly low spin. How is it doing this? I don't exactly know, but it has to be the inclusion of graphene in the material construction. As it is a true Tour Proto, I don't have all the finite details on exactly how or where, but I can tell you it's the first graphite shaft using graphene and we have the data to prove the results. Below I have included a couple articles on graphene for the techies out there. Basically it's the strongest fiber ever tested and over 200 times stronger than steel.

Graphene info:

http://www.graphene....an-graphene-do/

https://en.wikipedia.org/wiki/Graphene


Where to purchase:

http://www.golfwrx.c...evaluationscom/


I will post several more comparison Trackman blocks in the days coming.


20171030_121458.jpg
20171030_121515.jpg
20171030_121616.jpg
20171030_155746.jpg
20171030_155825.jpg

http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


1

#2 moonshine

moonshine

    Can't wait for spring..wait..it is 69 here 2day! 1/9/18

  • ClubWRX Charter Members
  • 5,888 posts
  •  
  • Member #: 31690
  • Joined: 06/14/2007
  • Location:North Charleston, SC
  • Handicap:2.4
GolfWRX Likes : 650

Posted 01 November 2017 - 11:52 AM

Did the KK still feel the best?  thanks..good stuff!
"We have learned that we must
live as men, not as ostriches, nor
as dogs in the manger." FDR

2

#3 BigHook25

BigHook25

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 2,007 posts
  •  
  • Member #: 143811
  • Joined: 10/23/2011
GolfWRX Likes : 505

Posted 01 November 2017 - 11:53 AM

Was there any shaft that was found to be more accurate out of those four?

3

#4 gioguy21

gioguy21

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,434 posts
  •  
  • Member #: 244071
  • Joined: 04/09/2013
  • Location:NJ
  • Handicap:+0.8
GolfWRX Likes : 2697

Posted 01 November 2017 - 11:55 AM

View PostBigHook25, on 01 November 2017 - 11:53 AM, said:

Was there any shaft that was found to be more accurate out of those four?
of the four - i've hit 3. the synergy, mamba, and KK DC. i'd rank them more accurate to least accurate this way:

1) KK DC
2) Synergy 60/65TX
3) Mamba

with regards to longest distance (i've seen):

1) Synergy 60/65TX
2) KK DC
3) Mamba

G400 10.5* / Synergy PROTO 65TX

2017 M2 Tour 3HL / HZRDUS T1100 75g 6.0 Tipped 3/4"

UDI 20 / Tensei Pro White Hybrid 90TX

Custom TM Blades ('14 TP MBs) 4-PW /  DG X100 HSx1

MD Forged 52 (10), 58 (8)  /  DG TI S200

Zombee Stinger BBZero F.I.T. (limited run) / 35.5"

TP5x OR ProV1


4

#5 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 01 November 2017 - 11:56 AM

View Postmoonshine, on 01 November 2017 - 11:52 AM, said:

Did the KK still feel the best?  thanks..good stuff!

Overall I would say the DCXT is still probably the smoothest of the three. None are what I would call excessively firm feeling, and all have some life to them, but the DCXT has a pretty unique feel where it's smooth when you swing easy and firmer the harder you swing. The Synergy is a little like that, but nothing quite captures that as well as the DCXT.

http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

5

#6 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 01 November 2017 - 11:59 AM

View PostBigHook25, on 01 November 2017 - 11:53 AM, said:

Was there any shaft that was found to be more accurate out of those four?

I think that's really more on the shaft you like the feel and balance of best. They are all made to do the same thing, just each with a different feel, and obviously the performance does vary a bit, but not massively. I will say that the SYNERGY, and no I don't know the torque on the PROTO, definitely does not feel like the face deflects open a lot if you hit the ball slightly toe side. Instead of that slingy draw you get on that type of hit, it really likes to hold it's line. I do enjoy that about it. I'm experimenting on the course with a 65 at the moment and really liking the results.
http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

6

#7 03SMURF

03SMURF

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 638 posts
  •  
  • Member #: 323223
  • Joined: 06/25/2014
  • Location:Central Ohio
  • Handicap:+0.2
GolfWRX Likes : 287

Posted 01 November 2017 - 02:09 PM

Wow, those numbers don't lie!
'17 M2 9.5* RT Tech. Zeus 75 Tipped 1/2" - 44.5"
915 Fd 15* - D+ 80X - 42.5"
716 T-MB 3 iron - RIP Tour 115
714 MB - 4-pw - X100's
SM5's - 50/08 F, 56/10 (55*) M, 60/08 M - X100's
Machine M2A Converter - Long Kneck/Half Offset - Iomic Midsize
ProV1X
4up Stadry

7

#8 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 01 November 2017 - 02:39 PM

View Post03SMURF, on 01 November 2017 - 02:09 PM, said:

Wow, those numbers don't lie!

I have a couple more blocks to put up. The lower the swing speed, the flatter the launch got. It doesn't react like most shafts when you leave them untipped. Normally there's enough tip action in almost anything untipped to retain some level of launch, but the Synergy is still massively low spin without tipping. It starts really spin cutting at 1/2 inch and at 1 inch I was getting spin numbers under 2000. Make no mistake, this Proto Synergy will not be playable for some players, but for others it's the Holy Grail. I would prefer nobody make the purchase of this shaft without consulting me on tipping info for it. You are really running the risk of getting a shaft that hits a ball you cannot keep in the air if you fly blind on this one. It is absolutely not for everyone.
http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

8

#9 woody089

woody089

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 250 posts
  •  
  • Member #: 177348
  • Joined: 04/25/2012
GolfWRX Likes : 50

Posted 01 November 2017 - 02:42 PM

sub'd

9

#10 Harob11

Harob11

    Harob11

  • Advanced Members
  • PipPipPipPipPip
  • 948 posts
  •  
  • Member #: 76902
  • Joined: 03/07/2009
  • Ebay ID:harob111
GolfWRX Likes : 99

Posted 01 November 2017 - 03:13 PM

Great info, thanks!

Drive 400 - Swing Faster. Drive Further. www.puredistancegolf.com/drive400

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


10

#11 BigHook25

BigHook25

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 2,007 posts
  •  
  • Member #: 143811
  • Joined: 10/23/2011
GolfWRX Likes : 505

Posted 01 November 2017 - 05:09 PM

 TollBros, on 01 November 2017 - 02:39 PM, said:

 03SMURF, on 01 November 2017 - 02:09 PM, said:

Wow, those numbers don't lie!

I have a couple more blocks to put up. The lower the swing speed, the flatter the launch got. It doesn't react like most shafts when you leave them untipped. Normally there's enough tip action in almost anything untipped to retain some level of launch, but the Synergy is still massively low spin without tipping. It starts really spin cutting at 1/2 inch and at 1 inch I was getting spin numbers under 2000. Make no mistake, this Proto Synergy will not be playable for some players, but for others it's the Holy Grail. I would prefer nobody make the purchase of this shaft without consulting me on tipping info for it. You are really running the risk of getting a shaft that hits a ball you cannot keep in the air if you fly blind on this one. It is absolutely not for everyone.

Good to know.  Where the other shafts tipped at all?  If so, how much?

11

#12 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 01 November 2017 - 06:08 PM

 BigHook25, on 01 November 2017 - 05:09 PM, said:

 TollBros, on 01 November 2017 - 02:39 PM, said:

 03SMURF, on 01 November 2017 - 02:09 PM, said:

Wow, those numbers don't lie!

I have a couple more blocks to put up. The lower the swing speed, the flatter the launch got. It doesn't react like most shafts when you leave them untipped. Normally there's enough tip action in almost anything untipped to retain some level of launch, but the Synergy is still massively low spin without tipping. It starts really spin cutting at 1/2 inch and at 1 inch I was getting spin numbers under 2000. Make no mistake, this Proto Synergy will not be playable for some players, but for others it's the Holy Grail. I would prefer nobody make the purchase of this shaft without consulting me on tipping info for it. You are really running the risk of getting a shaft that hits a ball you cannot keep in the air if you fly blind on this one. It is absolutely not for everyone.

Good to know.  Where the other shafts tipped at all?  If so, how much?

We always test untipped, 1/2 inch and 1 inch. Which block depends on the player's speed and load. Tipping has to right on shafts like this or they won't perform as desired.
http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

12

#13 03SMURF

03SMURF

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 638 posts
  •  
  • Member #: 323223
  • Joined: 06/25/2014
  • Location:Central Ohio
  • Handicap:+0.2
GolfWRX Likes : 287

Posted 02 November 2017 - 08:27 AM

 TollBros, on 01 November 2017 - 02:39 PM, said:

 03SMURF, on 01 November 2017 - 02:09 PM, said:

Wow, those numbers don't lie!

I have a couple more blocks to put up. The lower the swing speed, the flatter the launch got. It doesn't react like most shafts when you leave them untipped. Normally there's enough tip action in almost anything untipped to retain some level of launch, but the Synergy is still massively low spin without tipping. It starts really spin cutting at 1/2 inch and at 1 inch I was getting spin numbers under 2000. Make no mistake, this Proto Synergy will not be playable for some players, but for others it's the Holy Grail. I would prefer nobody make the purchase of this shaft without consulting me on tipping info for it. You are really running the risk of getting a shaft that hits a ball you cannot keep in the air if you fly blind on this one. It is absolutely not for everyone.

I completely agree. I've traditionally played low/low shafts and haven't struggled with too much spin with a 915 D3 7.5* head or a M1 9.5* head. I've yet to have this M2 head on Trackman, but I'd be surprised if I ever needed something as low spin as what the Synergy is showing.

Have you noticed a spin RPM range in which testers are most accurate?
'17 M2 9.5* RT Tech. Zeus 75 Tipped 1/2" - 44.5"
915 Fd 15* - D+ 80X - 42.5"
716 T-MB 3 iron - RIP Tour 115
714 MB - 4-pw - X100's
SM5's - 50/08 F, 56/10 (55*) M, 60/08 M - X100's
Machine M2A Converter - Long Kneck/Half Offset - Iomic Midsize
ProV1X
4up Stadry

13

#14 gioguy21

gioguy21

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,434 posts
  •  
  • Member #: 244071
  • Joined: 04/09/2013
  • Location:NJ
  • Handicap:+0.8
GolfWRX Likes : 2697

Posted 02 November 2017 - 08:33 AM

 03SMURF, on 02 November 2017 - 08:27 AM, said:

 TollBros, on 01 November 2017 - 02:39 PM, said:

 03SMURF, on 01 November 2017 - 02:09 PM, said:

Wow, those numbers don't lie!

I have a couple more blocks to put up. The lower the swing speed, the flatter the launch got. It doesn't react like most shafts when you leave them untipped. Normally there's enough tip action in almost anything untipped to retain some level of launch, but the Synergy is still massively low spin without tipping. It starts really spin cutting at 1/2 inch and at 1 inch I was getting spin numbers under 2000. Make no mistake, this Proto Synergy will not be playable for some players, but for others it's the Holy Grail. I would prefer nobody make the purchase of this shaft without consulting me on tipping info for it. You are really running the risk of getting a shaft that hits a ball you cannot keep in the air if you fly blind on this one. It is absolutely not for everyone.

I completely agree. I've traditionally played low/low shafts and haven't struggled with too much spin with a 915 D3 7.5* head or a M1 9.5* head. I've yet to have this M2 head on Trackman, but I'd be surprised if I ever needed something as low spin as what the Synergy is showing.

Have you noticed a spin RPM range in which testers are most accurate?
always a tradeoff -- i've found for me spinning just over 2200-2300 is ideal for both distance and control.

G400 10.5* / Synergy PROTO 65TX

2017 M2 Tour 3HL / HZRDUS T1100 75g 6.0 Tipped 3/4"

UDI 20 / Tensei Pro White Hybrid 90TX

Custom TM Blades ('14 TP MBs) 4-PW /  DG X100 HSx1

MD Forged 52 (10), 58 (8)  /  DG TI S200

Zombee Stinger BBZero F.I.T. (limited run) / 35.5"

TP5x OR ProV1


14

#15 Wardonation

Wardonation

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,091 posts
  •  
  • Member #: 107035
  • Joined: 04/28/2010
  • Handicap:+2.8
GolfWRX Likes : 120

Posted 02 November 2017 - 11:58 AM

Toll, what happened to your website? greengrassevalutaions? It is down?


15

#16 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 02 November 2017 - 12:00 PM

 03SMURF, on 02 November 2017 - 08:27 AM, said:

 TollBros, on 01 November 2017 - 02:39 PM, said:

 03SMURF, on 01 November 2017 - 02:09 PM, said:

Wow, those numbers don't lie!

I have a couple more blocks to put up. The lower the swing speed, the flatter the launch got. It doesn't react like most shafts when you leave them untipped. Normally there's enough tip action in almost anything untipped to retain some level of launch, but the Synergy is still massively low spin without tipping. It starts really spin cutting at 1/2 inch and at 1 inch I was getting spin numbers under 2000. Make no mistake, this Proto Synergy will not be playable for some players, but for others it's the Holy Grail. I would prefer nobody make the purchase of this shaft without consulting me on tipping info for it. You are really running the risk of getting a shaft that hits a ball you cannot keep in the air if you fly blind on this one. It is absolutely not for everyone.

I completely agree. I've traditionally played low/low shafts and haven't struggled with too much spin with a 915 D3 7.5* head or a M1 9.5* head. I've yet to have this M2 head on Trackman, but I'd be surprised if I ever needed something as low spin as what the Synergy is showing.

Have you noticed a spin RPM range in which testers are most accurate?

And that's why they make great product for all levels of launch and spin. Not everyone needs a shaft like this. Some guys hit a Tensei Pro Blue or a Rogue 125 much better. It's all about getting what's best for you. I however, need the massive spin cut because of the speed, so to me, things like new tech and material construction that really drops the spin rates while retaining feel is very exciting. For guys who don't spin it a lot, they couldn't care less. Haha

As for accuracy, that's really more the dynamic of what you feel most comfortable with and how consistently you make contact. I personally have found Synergy to be very consistent just like Kuro Kąge Dual Core XT for me. I wouldn't say one is massively more consistent than the other, and I'm comfortable with both. If you are just asking about a consistentcy level and if it performs as expect each and every swing, to that I can say certainly yes.
http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

16

#17 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 02 November 2017 - 12:01 PM

 Wardonation, on 02 November 2017 - 11:58 AM, said:

Toll, what happened to your website? greengrassevalutaions? It is down?

Somewhat off topic here, haha, but yes it crashed and the web guy is getting it all put back up. It should be there again in a couple days.
http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

17

#18 DFS PFD

DFS PFD

    Member

  • Advanced Members
  • PipPipPip
  • 163 posts
  •  
  • Member #: 485676
  • Joined: 10/30/2017
  • Location:Nevada
  • Handicap:0.8
GolfWRX Likes : 72

Posted 02 November 2017 - 01:08 PM

I'm super spinny sometimes with my 440 M1 and T1100 , but looking to move to this proto synergy in g400 LST...any idea if it will be too spinny? Currently around 2200 rpm on good strikes but can end up north of 3000 on mishits.
M1 440 w/ SYNERGY Proto 75TX
M2 Tour 15 * w/ KK DC TX
Black Scott SG-03 3-PW w/ PX 7.0 (alternate PXG 0311T w/ KBS C-Taper 130X)
Vokey Raw 55* 60* PX LZ 6.5
PM Grind 64* PX LZ 6.0
TM J-DAY SPIDER TOUR

18

#19 gioguy21

gioguy21

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,434 posts
  •  
  • Member #: 244071
  • Joined: 04/09/2013
  • Location:NJ
  • Handicap:+0.8
GolfWRX Likes : 2697

Posted 02 November 2017 - 01:20 PM

 DFS PFD, on 02 November 2017 - 01:08 PM, said:

I'm super spinny sometimes with my 440 M1 and T1100 , but looking to move to this proto synergy in g400 LST...any idea if it will be too spinny? Currently around 2200 rpm on good strikes but can end up north of 3000 on mishits.
I've had both, the synergy is lower spin than t1100 and more predictable.

G400 10.5* / Synergy PROTO 65TX

2017 M2 Tour 3HL / HZRDUS T1100 75g 6.0 Tipped 3/4"

UDI 20 / Tensei Pro White Hybrid 90TX

Custom TM Blades ('14 TP MBs) 4-PW /  DG X100 HSx1

MD Forged 52 (10), 58 (8)  /  DG TI S200

Zombee Stinger BBZero F.I.T. (limited run) / 35.5"

TP5x OR ProV1


19

#20 DFS PFD

DFS PFD

    Member

  • Advanced Members
  • PipPipPip
  • 163 posts
  •  
  • Member #: 485676
  • Joined: 10/30/2017
  • Location:Nevada
  • Handicap:0.8
GolfWRX Likes : 72

Posted 02 November 2017 - 01:24 PM

 gioguy21, on 02 November 2017 - 01:20 PM, said:

 DFS PFD, on 02 November 2017 - 01:08 PM, said:

I'm super spinny sometimes with my 440 M1 and T1100 , but looking to move to this proto synergy in g400 LST...any idea if it will be too spinny? Currently around 2200 rpm on good strikes but can end up north of 3000 on mishits.
I've had both, the synergy is lower spin than t1100 and more predictable.

That's all I needed to hear, my game would be nonexistent without these ultra low spin shafts (contrary to belief on the other forum). Thanks for the insight! Those are some sweet irons btw.

M1 440 w/ SYNERGY Proto 75TX
M2 Tour 15 * w/ KK DC TX
Black Scott SG-03 3-PW w/ PX 7.0 (alternate PXG 0311T w/ KBS C-Taper 130X)
Vokey Raw 55* 60* PX LZ 6.5
PM Grind 64* PX LZ 6.0
TM J-DAY SPIDER TOUR

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

20

#21 gioguy21

gioguy21

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,434 posts
  •  
  • Member #: 244071
  • Joined: 04/09/2013
  • Location:NJ
  • Handicap:+0.8
GolfWRX Likes : 2697

Posted 02 November 2017 - 01:26 PM

 DFS PFD, on 02 November 2017 - 01:24 PM, said:

 gioguy21, on 02 November 2017 - 01:20 PM, said:

 DFS PFD, on 02 November 2017 - 01:08 PM, said:

I'm super spinny sometimes with my 440 M1 and T1100 , but looking to move to this proto synergy in g400 LST...any idea if it will be too spinny? Currently around 2200 rpm on good strikes but can end up north of 3000 on mishits.
I've had both, the synergy is lower spin than t1100 and more predictable.

That's all I needed to hear, my game would be nonexistent without these ultra low spin shafts (contrary to belief on the other forum). Thanks for the insight! Those are some sweet irons btw.
Thanks man lol dream sticks. Soapbox threads have their place too, it allows us to know who we can ignore.

G400 10.5* / Synergy PROTO 65TX

2017 M2 Tour 3HL / HZRDUS T1100 75g 6.0 Tipped 3/4"

UDI 20 / Tensei Pro White Hybrid 90TX

Custom TM Blades ('14 TP MBs) 4-PW /  DG X100 HSx1

MD Forged 52 (10), 58 (8)  /  DG TI S200

Zombee Stinger BBZero F.I.T. (limited run) / 35.5"

TP5x OR ProV1


21

#22 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 02 November 2017 - 03:42 PM

 gioguy21, on 02 November 2017 - 01:26 PM, said:

 DFS PFD, on 02 November 2017 - 01:24 PM, said:

 gioguy21, on 02 November 2017 - 01:20 PM, said:

 DFS PFD, on 02 November 2017 - 01:08 PM, said:

I'm super spinny sometimes with my 440 M1 and T1100 , but looking to move to this proto synergy in g400 LST...any idea if it will be too spinny? Currently around 2200 rpm on good strikes but can end up north of 3000 on mishits.
I've had both, the synergy is lower spin than t1100 and more predictable.

That's all I needed to hear, my game would be nonexistent without these ultra low spin shafts (contrary to belief on the other forum). Thanks for the insight! Those are some sweet irons btw.
Thanks man lol dream sticks. Soapbox threads have their place too, it allows us to know who we can ignore.

True on all accounts.
http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

22

#23 gioguy21

gioguy21

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,434 posts
  •  
  • Member #: 244071
  • Joined: 04/09/2013
  • Location:NJ
  • Handicap:+0.8
GolfWRX Likes : 2697

Posted 06 November 2017 - 09:17 AM

been using mine for a week or two now. while the aldila green xtorsion is dependable at hitting straight or a cut -- this synergy is easier (to me) to bend both ways but man is it long.

i won a few bucks on friday playing this. i was a few walmarts infront of my playing partners quite a few times.

also, it's very apparent that wind is not an issue with this shaft either. crosswinds, hurting winds -- just don't bother it. down wind drives are ridiculous - especially those that are launched a degree or two higher.

Edited by gioguy21, 06 November 2017 - 09:23 AM.

G400 10.5* / Synergy PROTO 65TX

2017 M2 Tour 3HL / HZRDUS T1100 75g 6.0 Tipped 3/4"

UDI 20 / Tensei Pro White Hybrid 90TX

Custom TM Blades ('14 TP MBs) 4-PW /  DG X100 HSx1

MD Forged 52 (10), 58 (8)  /  DG TI S200

Zombee Stinger BBZero F.I.T. (limited run) / 35.5"

TP5x OR ProV1


23

#24 jcg132

jcg132

    PTPOTCW

  • Advanced Members
  • PipPipPipPip
  • 397 posts
  •  
  • Member #: 428230
  • Joined: 06/07/2016
  • Location:Stamford, CT
GolfWRX Likes : 102

Posted 06 November 2017 - 09:58 AM

 gioguy21, on 06 November 2017 - 09:17 AM, said:

been using mine for a week or two now. while the aldila green xtorsion is dependable at hitting straight or a cut -- this synergy is easier (to me) to bend both ways but man is it long.

i won a few bucks on friday playing this. i was a few walmarts infront of my playing partners quite a few times.

also, it's very apparent that wind is not an issue with this shaft either. crosswinds, hurting winds -- just don't bother it. down wind drives are ridiculous - especially those that are launched a degree or two higher.

Good to hear - I have one on the way!
Callaway Tour Issue GBB Epic Sub Zero "L Stamp" 8° - Aldila SYNERGY Black Graphene Tour PROTO 65 TX / Mitsubishi Chemical TENSEI CK Pro Orange 60 TX (44.5")
Callaway Rogue Sub Zero 15° - Project X EvenFlow Blue 75 6.5 (42.5", 1.0
° Flat, D4)
Callaway Big Bertha OS 18° - Project X Handcrafted HZRDUS Black Hybrid 85 6.0 (D4)
Callaway Epic 22° -
Mitsubishi TENSEI CK Pro White Hybrid 90 TX (Tipped 0.5", D4)
PXG 0311 5-7 - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 2.0° Upright, D4)

PXG 0311T 8-PW - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Strong, 2.0° Upright)
Vokey SM6 Raw 50.08°F - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Vokey SM6 Raw 55.09°S - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Vokey SM6 Raw 60.08°M - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Scotty Cameron 009M Carbon - 34", 3.5
°, 70°

Wilson Staff Duo Urethane
Golf Pride MCC Plus4
FootJoy Pure Touch Limited
Sun Mountain C130
Nike Apparel

24

#25 gioguy21

gioguy21

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,434 posts
  •  
  • Member #: 244071
  • Joined: 04/09/2013
  • Location:NJ
  • Handicap:+0.8
GolfWRX Likes : 2697

Posted 06 November 2017 - 10:00 AM

 jcg132, on 06 November 2017 - 09:58 AM, said:

 gioguy21, on 06 November 2017 - 09:17 AM, said:

been using mine for a week or two now. while the aldila green xtorsion is dependable at hitting straight or a cut -- this synergy is easier (to me) to bend both ways but man is it long.

i won a few bucks on friday playing this. i was a few walmarts infront of my playing partners quite a few times.

also, it's very apparent that wind is not an issue with this shaft either. crosswinds, hurting winds -- just don't bother it. down wind drives are ridiculous - especially those that are launched a degree or two higher.

Good to hear - I have one on the way!
if you like the feel of your oban devotion you're really going to like this.

G400 10.5* / Synergy PROTO 65TX

2017 M2 Tour 3HL / HZRDUS T1100 75g 6.0 Tipped 3/4"

UDI 20 / Tensei Pro White Hybrid 90TX

Custom TM Blades ('14 TP MBs) 4-PW /  DG X100 HSx1

MD Forged 52 (10), 58 (8)  /  DG TI S200

Zombee Stinger BBZero F.I.T. (limited run) / 35.5"

TP5x OR ProV1


25

#26 jcg132

jcg132

    PTPOTCW

  • Advanced Members
  • PipPipPipPip
  • 397 posts
  •  
  • Member #: 428230
  • Joined: 06/07/2016
  • Location:Stamford, CT
GolfWRX Likes : 102

Posted 06 November 2017 - 10:01 AM

 gioguy21, on 06 November 2017 - 10:00 AM, said:

 jcg132, on 06 November 2017 - 09:58 AM, said:

 gioguy21, on 06 November 2017 - 09:17 AM, said:

been using mine for a week or two now. while the aldila green xtorsion is dependable at hitting straight or a cut -- this synergy is easier (to me) to bend both ways but man is it long.

i won a few bucks on friday playing this. i was a few walmarts infront of my playing partners quite a few times.

also, it's very apparent that wind is not an issue with this shaft either. crosswinds, hurting winds -- just don't bother it. down wind drives are ridiculous - especially those that are launched a degree or two higher.

Good to hear - I have one on the way!
if you like the feel of your oban devotion you're really going to like this.

Awesome - desperately need some launch angle and spin reduction so can't wait to see the numbers. A shame it is starting to get cold here in the Northeast!
Callaway Tour Issue GBB Epic Sub Zero "L Stamp" 8° - Aldila SYNERGY Black Graphene Tour PROTO 65 TX / Mitsubishi Chemical TENSEI CK Pro Orange 60 TX (44.5")
Callaway Rogue Sub Zero 15° - Project X EvenFlow Blue 75 6.5 (42.5", 1.0
° Flat, D4)
Callaway Big Bertha OS 18° - Project X Handcrafted HZRDUS Black Hybrid 85 6.0 (D4)
Callaway Epic 22° -
Mitsubishi TENSEI CK Pro White Hybrid 90 TX (Tipped 0.5", D4)
PXG 0311 5-7 - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 2.0° Upright, D4)

PXG 0311T 8-PW - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Strong, 2.0° Upright)
Vokey SM6 Raw 50.08°F - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Vokey SM6 Raw 55.09°S - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Vokey SM6 Raw 60.08°M - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Scotty Cameron 009M Carbon - 34", 3.5
°, 70°

Wilson Staff Duo Urethane
Golf Pride MCC Plus4
FootJoy Pure Touch Limited
Sun Mountain C130
Nike Apparel

26

#27 gioguy21

gioguy21

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 4,434 posts
  •  
  • Member #: 244071
  • Joined: 04/09/2013
  • Location:NJ
  • Handicap:+0.8
GolfWRX Likes : 2697

Posted 06 November 2017 - 10:09 AM

 jcg132, on 06 November 2017 - 10:01 AM, said:

 gioguy21, on 06 November 2017 - 10:00 AM, said:

 jcg132, on 06 November 2017 - 09:58 AM, said:

 gioguy21, on 06 November 2017 - 09:17 AM, said:

been using mine for a week or two now. while the aldila green xtorsion is dependable at hitting straight or a cut -- this synergy is easier (to me) to bend both ways but man is it long.

i won a few bucks on friday playing this. i was a few walmarts infront of my playing partners quite a few times.

also, it's very apparent that wind is not an issue with this shaft either. crosswinds, hurting winds -- just don't bother it. down wind drives are ridiculous - especially those that are launched a degree or two higher.

Good to hear - I have one on the way!
if you like the feel of your oban devotion you're really going to like this.

Awesome - desperately need some launch angle and spin reduction so can't wait to see the numbers. A shame it is starting to get cold here in the Northeast!
You need launch AND spin reduction? i haven't hit the devo side by side with the synergy - but the synergy doesn't get anything more than a mid launch at best from me. one things for sure, it does not spin.

G400 10.5* / Synergy PROTO 65TX

2017 M2 Tour 3HL / HZRDUS T1100 75g 6.0 Tipped 3/4"

UDI 20 / Tensei Pro White Hybrid 90TX

Custom TM Blades ('14 TP MBs) 4-PW /  DG X100 HSx1

MD Forged 52 (10), 58 (8)  /  DG TI S200

Zombee Stinger BBZero F.I.T. (limited run) / 35.5"

TP5x OR ProV1


27

#28 Peanut191

Peanut191

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,536 posts
  •  
  • Member #: 299122
  • Joined: 02/27/2014
GolfWRX Likes : 566

Posted 06 November 2017 - 10:20 AM

Toll, has the Synergy taken the place of the KK DC XT in your bag?
M2 10.5, set to 9.75, D5, KK XT 70s
M2 Tour 16.5, Diamana Thump 85s
Titleist 913 21* Kiyoshi White 95 04 flex
Srixon 745 4-PW, Dynamic Gold 115s
Vokey 56F 14 bounce, Vokey Wedgeworks 60K 6 bounce
Scotty Newport 1.5

28

#29 jcg132

jcg132

    PTPOTCW

  • Advanced Members
  • PipPipPipPip
  • 397 posts
  •  
  • Member #: 428230
  • Joined: 06/07/2016
  • Location:Stamford, CT
GolfWRX Likes : 102

Posted 06 November 2017 - 10:49 AM

 gioguy21, on 06 November 2017 - 10:09 AM, said:

 jcg132, on 06 November 2017 - 10:01 AM, said:

 gioguy21, on 06 November 2017 - 10:00 AM, said:

 jcg132, on 06 November 2017 - 09:58 AM, said:

 gioguy21, on 06 November 2017 - 09:17 AM, said:

been using mine for a week or two now. while the aldila green xtorsion is dependable at hitting straight or a cut -- this synergy is easier (to me) to bend both ways but man is it long.

i won a few bucks on friday playing this. i was a few walmarts infront of my playing partners quite a few times.

also, it's very apparent that wind is not an issue with this shaft either. crosswinds, hurting winds -- just don't bother it. down wind drives are ridiculous - especially those that are launched a degree or two higher.

Good to hear - I have one on the way!
if you like the feel of your oban devotion you're really going to like this.

Awesome - desperately need some launch angle and spin reduction so can't wait to see the numbers. A shame it is starting to get cold here in the Northeast!
You need launch AND spin reduction? i haven't hit the devo side by side with the synergy - but the synergy doesn't get anything more than a mid launch at best from me. one things for sure, it does not spin.

Yes. And good news - can't wait to try it!
Callaway Tour Issue GBB Epic Sub Zero "L Stamp" 8° - Aldila SYNERGY Black Graphene Tour PROTO 65 TX / Mitsubishi Chemical TENSEI CK Pro Orange 60 TX (44.5")
Callaway Rogue Sub Zero 15° - Project X EvenFlow Blue 75 6.5 (42.5", 1.0
° Flat, D4)
Callaway Big Bertha OS 18° - Project X Handcrafted HZRDUS Black Hybrid 85 6.0 (D4)
Callaway Epic 22° -
Mitsubishi TENSEI CK Pro White Hybrid 90 TX (Tipped 0.5", D4)
PXG 0311 5-7 - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 2.0° Upright, D4)

PXG 0311T 8-PW - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Strong, 2.0° Upright)
Vokey SM6 Raw 50.08°F - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Vokey SM6 Raw 55.09°S - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Vokey SM6 Raw 60.08°M - Nippon N.S. PRO Modus3 Tour 120 Stiff (+0.5", 1.0° Upright)
Scotty Cameron 009M Carbon - 34", 3.5
°, 70°

Wilson Staff Duo Urethane
Golf Pride MCC Plus4
FootJoy Pure Touch Limited
Sun Mountain C130
Nike Apparel

29

#30 TollBros

TollBros

    Overseer of the Test Range

  • Sponsors
  • 2,692 posts
  •  
  • Member #: 438250
  • Joined: 08/25/2016
GolfWRX Likes : 1900

Posted 06 November 2017 - 02:04 PM

 Peanut191, on 06 November 2017 - 10:20 AM, said:

Toll, has the Synergy taken the place of the KK DC XT in your bag?

I've only gotten to play it once on the course and I'm a little slow to change what I trust. It was very long and every bit as good in terms of accuracy, but I'd like to get another round or two in before I fully commit to a change.

http://www.golfwrx.c...evaluationscom/

Please click the link above for our Sponsor area with rare and Tour only products.

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

30



1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users

GolfWRX Sponsors