Jump to content

Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with members, access to all forums and eligiblility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

Flow neck putter insert to replace double bend?

Putter flow neck

  • Please log in to reply
24 replies to this topic

#1 FirePro

FirePro

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 856 posts
  •  
  • Member #: 286817
  • Joined: 12/05/2013
  • Location:Dundas
  • Handicap:6
GolfWRX Likes : 212

Posted 14 August 2017 - 11:31 AM

Hi everyone, not sure if this has been asked but does anyone make an adapter that I can change my double bend putter shaft to a flow neck?

I have seen this but would rather a flow neck rather then the plumbers neck

Plumbers neck adapter.jpg

Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
Hand Crafted wedges from Kyoei Raw Forged Blanks
52deg w/ KBS $-Taper 130X PW Shaft
56deg w/ KBS $-Taper 130X PW Shaft
60deg w/ KBS $-Taper 130X 8i Shaft
Putter: Odyssey Havok

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


1

#2 dbdors

dbdors

    Major Winner

  • ClubWRX Charter Members
  • 1,635 posts
  •  
  • Member #: 139771
  • Joined: 09/23/2011
  • Location:Houston, Clear Lake area
  • Handicap:18
  • Ebay ID:dbdors
GolfWRX Likes : 390

Posted 14 August 2017 - 11:53 AM

This is likely the closest you'll get to an adapter.  

https://www.hirekogo...er-adapter.html

Edited by dbdors, 14 August 2017 - 04:18 PM.


Woods: Ping G30 10.5 Aldila Rogue Silver 60 Tour S, TEE CBX 4W (16.5) Aldila Rogue Silver 70 S
Hybrids: TEE CBX 3H (20d), 4H (22d), Kuro Kage Silver Hybrid 80 S
Irons: TM 2017 M2, 5-PW, KBS Tour 105 S
Wedges: Mizuno T7 Blue Ion, 50.07, 55.13, 60.10, TT Wedge, S200
Putters: Evnroll ER1.2 355g, 33", SS Counter Core Mid Slim 2.0
Ball: Srixon Zstar in yellow
Bag/Cart: '18 Ping Hoofer/Clicgear 3.5+
Accessories: Garmin G8/Bushnell Tour V4

2

#3 AThompson_3

AThompson_3

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,350 posts
  •  
  • Member #: 395356
  • Joined: 09/09/2015
  • Location:Northern Kentucky
  • Handicap:0
GolfWRX Likes : 608

Posted 14 August 2017 - 08:17 PM

Don't most of the current mallets have stems instead of holes? Essentially rendering these useless?
Driver: Callaway Epic SZ 9* Fujikura Atmos Tour Spec Black 6X
3 Wood: Titleist 917 F2 15* Diamana D+ 70X
Hybrid: Titleist 818 H2 19* Fujikura Atmos HB Tour Spec Black 9X
Irons: Mizuno MP-25 4-P DGTI X100
Wedges: Vokey SM7 50F, 55S, 60M Project X 6.5
Putter(s): Odyssey O Works 7s Black, Bettinardi BB1F
Ball: Titleist Pro V1
Bag: Sun Mountain Four-5

3

#4 xxio

xxio

    Hall of Fame

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 5,400 posts
  •  
  • Member #: 541
  • Joined: 05/06/2005
  • Location:Cebu, Philippines
GolfWRX Likes : 459

Posted 14 August 2017 - 09:35 PM

I'm having a friend cast me one. The problem are:

getting the flow just right for such a short neck.
trying to get it done in a sturdy material. He does most of his stuff in brass and bronze.
finally drilling the hole.

4

#5 FirePro

FirePro

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 856 posts
  •  
  • Member #: 286817
  • Joined: 12/05/2013
  • Location:Dundas
  • Handicap:6
GolfWRX Likes : 212

Posted 15 August 2017 - 09:55 AM

View PostAThompson_3, on 14 August 2017 - 08:17 PM, said:

Don't most of the current mallets have stems instead of holes? Essentially rendering these useless?
I plan on making a putter purchase in the near future, nothing a little drilling can't fix I guess, mine looks to be a  hole though

Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
Hand Crafted wedges from Kyoei Raw Forged Blanks
52deg w/ KBS $-Taper 130X PW Shaft
56deg w/ KBS $-Taper 130X PW Shaft
60deg w/ KBS $-Taper 130X 8i Shaft
Putter: Odyssey Havok

5

#6 tonypaz

tonypaz

    Newbie

  • Members
  • Pip
  • 6 posts
  •  
  • Member #: 458034
  • Joined: 03/09/2017
  • Location:MI
  • Ebay ID:tpaz
GolfWRX Likes : 0

Posted 15 August 2017 - 12:02 PM

Currently working on making one myself. I am making one for my Ghost Spider S. Took my double bend shaft off and putting in a black straight shaft that I purchased. I am going to try both aluminum and metal ones that I picked up material from work. Going to make them on my mill and bend them up to work.

6

#7 FirePro

FirePro

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 856 posts
  •  
  • Member #: 286817
  • Joined: 12/05/2013
  • Location:Dundas
  • Handicap:6
GolfWRX Likes : 212

Posted 15 August 2017 - 02:26 PM

are you located in Canada by chance?
Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
Hand Crafted wedges from Kyoei Raw Forged Blanks
52deg w/ KBS $-Taper 130X PW Shaft
56deg w/ KBS $-Taper 130X PW Shaft
60deg w/ KBS $-Taper 130X 8i Shaft
Putter: Odyssey Havok

7

#8 tonypaz

tonypaz

    Newbie

  • Members
  • Pip
  • 6 posts
  •  
  • Member #: 458034
  • Joined: 03/09/2017
  • Location:MI
  • Ebay ID:tpaz
GolfWRX Likes : 0

Posted 16 August 2017 - 11:54 AM

Nope located in Michigan.

8

#9 xxio

xxio

    Hall of Fame

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 5,400 posts
  •  
  • Member #: 541
  • Joined: 05/06/2005
  • Location:Cebu, Philippines
GolfWRX Likes : 459

Posted 16 August 2017 - 06:22 PM

I was just wondering, is it possible to order just converter necks from Dave Billings/Machine?

9

#10 FirePro

FirePro

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 856 posts
  •  
  • Member #: 286817
  • Joined: 12/05/2013
  • Location:Dundas
  • Handicap:6
GolfWRX Likes : 212

Posted 21 August 2017 - 04:28 PM

View Posttonypaz, on 16 August 2017 - 11:54 AM, said:

Nope located in Michigan.
ill be in Windsor tomorrow ha

Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
Hand Crafted wedges from Kyoei Raw Forged Blanks
52deg w/ KBS $-Taper 130X PW Shaft
56deg w/ KBS $-Taper 130X PW Shaft
60deg w/ KBS $-Taper 130X 8i Shaft
Putter: Odyssey Havok

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


10

#11 Nic1972

Nic1972

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 641 posts
  •  
  • Member #: 350971
  • Joined: 12/06/2014
  • Location:Italy
  • Handicap:10
GolfWRX Likes : 173

Posted 21 August 2017 - 04:40 PM

View PostAThompson_3, on 14 August 2017 - 08:17 PM, said:

Don't most of the current mallets have stems instead of holes? Essentially rendering these useless?
I have a Scotty Cameron California Fastback and would like to get a slant or plumbers neck. Does anybody know if this can be done easily, i.e. is there a hole in the putter head where the shaft goes in (from what I a can see this should be the case), or is there a stem? Also, is there a company based in Europe able to do this? Thanks!
Driver: Nike Covert Pro 2.0 / Mitsubishi Diamana S+ Ltd 60 S / Golf Pride MCC Align Black / White
Mini-Driver: Callaway X2Hot 2-Deep / Aldila Tour Green ATX75 3.7 S / Golf Pride MCC Align Black / White
3-Wood: Taylormade RBZ Stage 2 TP / Matrix Ozik Rul 80 S / Golf Pride MCC Align Black / White
DI: Adams DHY Pro (18') /  Mitsubishi Diamana D+ 82H S / Golf Pride MCC Align Black /White
Hybrids: Titleist 585H (21°); Adams 9031 Pro (24°) / Mitsubishi Diamana D+ 82H S / Golf Pride MCC Align Black / White
Irons: Mizuno MP H-5 (4 Iron); Mizuno MP 4 (5 - PW) / Mitsubishi OT-I 105 S / Golf Pride MCC Align Black / White
Wedges: Vokey SM 7 (50F08, 54M08, 58L04) / Project X LZ 6.0 / Golf Pride MCC Align Black /White
Putter: Yes Callie & Scotty Cameron California Fastback / UST Mamiya Frequency Filtered / Golf Pride Tour SNSR 104 Pistol
Ball: Titleist Pro V1X
Apparel: Nike
Glove: Nike Tour Classic
Shoes: Nike Lunar Command 2
Bag: Nike

11

#12 tonypaz

tonypaz

    Newbie

  • Members
  • Pip
  • 6 posts
  •  
  • Member #: 458034
  • Joined: 03/09/2017
  • Location:MI
  • Ebay ID:tpaz
GolfWRX Likes : 0

Posted 22 August 2017 - 11:22 AM

With my Ghost Spider S the bent shaft has as stud coming out of the shaft. There is no hole in it. I am modeling up an adapter that I will mill and turn up to epoxy over the stock stud and bend up and have a stud on it for the putter shaft to make it look like a slant neck.

12

#13 DREWZER300

DREWZER300

    Rookie

  • Members
  • PipPip
  • 50 posts
  •  
  • Member #: 298686
  • Joined: 02/25/2014
  • Location:Cincinnati, OH
  • Handicap:2.9
GolfWRX Likes : 6

Posted 23 August 2017 - 08:50 AM

View Postdbdors, on 14 August 2017 - 11:53 AM, said:

This is likely the closest you'll get to an adapter.  

https://www.hirekogo...er-adapter.html

I used one of these on my Tyne.  Had to grind quite a bit to get it to fit.  After installing I took it to work with me and blasted the entire head with aluminum oxide to give it a uniform finish.  Very happy with the final result.
Callaway Rogue SZ 9* Diamana BF Series 60TX
Callaway Rogue SZ 3W 13.5* Tensei CK Blue 70X
Callaway Epic Hybrid 18* Graphite Design AD-DI 70X
Callaway X Forged UT 21* Project X 6.0
Callaway Apex Pro 4-6 Project X 6.0
Callaway Apex MB 7-PW Project X 6.0
Callaway Mack Daddy 4 Wedge 52/58 Dynamic Gold Tour Issue
Toulon San Diego
Callaway Chromesoft

13

#14 FirePro

FirePro

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 856 posts
  •  
  • Member #: 286817
  • Joined: 12/05/2013
  • Location:Dundas
  • Handicap:6
GolfWRX Likes : 212

Posted 25 August 2017 - 12:24 PM

Ordered the Flow neck from Hireko site, lets see how this works out.
Cobra FlyZ+ @ 8.5 deg w/Grafalloy (White) Blue X-Stiff tipped 3/4" @ 44.75"
Taylormade 2017 M1 set to 13 deg w/ RBZ TP Aldila RIP Alpha 70X Tipped 1" @ 42.5"
Titleist 909 F2 (18.5deg) UST AxivCore Tour Green 95X Tipped 1.5" @ 41.5"
Srixon Z U45 4 & 2 w/ Aldila RIP Alpha 105 X Hybrid shaft (4 @ 38.5", 2 @ 39.5")
Srixon Z745 (5-PW) w/ KBS $-Taper X 130 Black
Hand Crafted wedges from Kyoei Raw Forged Blanks
52deg w/ KBS $-Taper 130X PW Shaft
56deg w/ KBS $-Taper 130X PW Shaft
60deg w/ KBS $-Taper 130X 8i Shaft
Putter: Odyssey Havok

14

#15 JumboJack

JumboJack

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 760 posts
  •  
  • Member #: 14586
  • Joined: 05/06/2006
  • Location:Lakewood,CA.
  • Handicap:1.3
  • Ebay ID:go.kings
GolfWRX Likes : 245

Posted 20 September 2017 - 11:54 PM

View PostDREWZER300, on 23 August 2017 - 08:50 AM, said:

View Postdbdors, on 14 August 2017 - 11:53 AM, said:

This is likely the closest you'll get to an adapter.  

https://www.hirekogo...er-adapter.html

I used one of these on my Tyne.  Had to grind quite a bit to get it to fit.  After installing I took it to work with me and blasted the entire head with aluminum oxide to give it a uniform finish.  Very happy with the final result.

I was thinking of getting a Tyne and marking it a knucklehead. Is the shaft hole on the Tyne straight/perfectly vertical?

TM M2 2017 10.5 Hzrdus Yellow 65 S
Ping G400 14.5 Alta CB S
Ping Anser 17* 23* Kuro Kage 80H S
PING i200 5-PW Modus3 105 S
PING Glide 2.0  50* 54* 60*  Modus 115 Wedge S
PING Craz-e h Vault 2.0
NDMC Plus 4
ProV1x

15

#16 fore_life

fore_life

    Swung too hard, hit it too pure.

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 9,533 posts
  •  
  • Member #: 59484
  • Joined: 07/03/2008
  • Location:Gilbert,AZ
  • Handicap:40
GolfWRX Likes : 2306

Posted 21 September 2017 - 01:12 AM

There are these too on eBay

http://www.ebay.com/...WYAAOSw44BYMLm9
Ping G400 LST Ust Attas Earth 9f5
M4 15* with bimatrix rocket X
Titleist 21* H2 evenflow blue 6.5
718 tmb 4 iron
718 cb 5-pw amt x100 tour
Vokeys
Cleveland TA milled 1i


Various other putters currently in the closet,
thinking about what they've done wrong,
and how they've hurt me so.

16

#17 semarlor

semarlor

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 508 posts
  •  
  • Member #: 118887
  • Joined: 12/14/2010
  • Location:Charlotte, NC
GolfWRX Likes : 247

Posted 03 October 2017 - 09:10 PM

View Postfore_life, on 21 September 2017 - 01:12 AM, said:

There are these too on eBay

http://www.ebay.com/...WYAAOSw44BYMLm9

Has anyone used one of these? He has them in aluminum, also, which won't add much weight. I thought about giving one a shot when I get my X7M redone in black. I am not looking to change toe hang or anything, purely for the look! Anyone have any experience to share?

17

#18 benno_r

benno_r

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 674 posts
  •  
  • Member #: 326435
  • Joined: 07/13/2014
  • Location:Australia
  • Handicap:11
GolfWRX Likes : 351

Posted 04 October 2017 - 08:30 PM

View Postsemarlor, on 03 October 2017 - 09:10 PM, said:

View Postfore_life, on 21 September 2017 - 01:12 AM, said:

There are these too on eBay

http://www.ebay.com/...WYAAOSw44BYMLm9

Has anyone used one of these? He has them in aluminum, also, which won't add much weight. I thought about giving one a shot when I get my X7M redone in black. I am not looking to change toe hang or anything, purely for the look! Anyone have any experience to share?

I talked to Chip at Black Lab about these, and they are designed to work on hosel bore holes that are 90deg.

Way back I had Lajosi make the same for a Scotty Squareback. When he had it, he confirmed the Scotty bores are not 90deg. If you were to install this on your Scotty, the preset lie angle in the knuckle will be 5-6deg out.

I can't comment on the X7M, but I would assume Scotty would use the same bore angle - as his propriety single bend shafts are designed to suit this.
Mizuno MP Type 2 - ADTP 6s
Taylormade M2 - ADDI 7s
FLY-Z XL 19 - Attas 105HS
FLY-Z XL 22 - Attas 105HS
Ping G30 5-GW
GrindWorks 54/58
Edel / Lajosi / Ping / Xenon / Odyssey / Black Lab on rotation

18

#19 semarlor

semarlor

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 508 posts
  •  
  • Member #: 118887
  • Joined: 12/14/2010
  • Location:Charlotte, NC
GolfWRX Likes : 247

Posted 04 October 2017 - 09:15 PM

View Postbenno_r, on 04 October 2017 - 08:30 PM, said:

View Postsemarlor, on 03 October 2017 - 09:10 PM, said:

View Postfore_life, on 21 September 2017 - 01:12 AM, said:

There are these too on eBay

http://www.ebay.com/...WYAAOSw44BYMLm9

Has anyone used one of these? He has them in aluminum, also, which won't add much weight. I thought about giving one a shot when I get my X7M redone in black. I am not looking to change toe hang or anything, purely for the look! Anyone have any experience to share?

I talked to Chip at Black Lab about these, and they are designed to work on hosel bore holes that are 90deg.

Way back I had Lajosi make the same for a Scotty Squareback. When he had it, he confirmed the Scotty bores are not 90deg. If you were to install this on your Scotty, the preset lie angle in the knuckle will be 5-6deg out.

I can't comment on the X7M, but I would assume Scotty would use the same bore angle - as his propriety single bend shafts are designed to suit this.

Thanks for the reply! I sent a message through ebay and Chip answered that he didn't know specifically about the X7M and the tip size of the stock shaft. I have heard several times that Scotty uses proprietary shafts so that's why I had reservations about it working the way I pictured. I wasn't even considering the issue of the bore angle. Thanks again, I appreciate the help!

19

#20 benno_r

benno_r

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 674 posts
  •  
  • Member #: 326435
  • Joined: 07/13/2014
  • Location:Australia
  • Handicap:11
GolfWRX Likes : 351

Posted 04 October 2017 - 09:40 PM

Not to say it can't be done though - it would just require some extra modding.

I looked at the pic of an x7M. You could cut off the spud that takes the current shaft, then have someone drill in a 90deg hole in the current location to install the knuckle.

You'd have to decide if that is worth the effort though.

Mizuno MP Type 2 - ADTP 6s
Taylormade M2 - ADDI 7s
FLY-Z XL 19 - Attas 105HS
FLY-Z XL 22 - Attas 105HS
Ping G30 5-GW
GrindWorks 54/58
Edel / Lajosi / Ping / Xenon / Odyssey / Black Lab on rotation

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

20

#21 semarlor

semarlor

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 508 posts
  •  
  • Member #: 118887
  • Joined: 12/14/2010
  • Location:Charlotte, NC
GolfWRX Likes : 247

Posted 04 October 2017 - 09:50 PM

Yeah, that's a little more involved than I want to get. I originally liked the idea of it being "plug and play," so to speak.

21

#22 fore_life

fore_life

    Swung too hard, hit it too pure.

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 9,533 posts
  •  
  • Member #: 59484
  • Joined: 07/03/2008
  • Location:Gilbert,AZ
  • Handicap:40
GolfWRX Likes : 2306

Posted 20 February 2018 - 01:40 PM

Any updates?
Ping G400 LST Ust Attas Earth 9f5
M4 15* with bimatrix rocket X
Titleist 21* H2 evenflow blue 6.5
718 tmb 4 iron
718 cb 5-pw amt x100 tour
Vokeys
Cleveland TA milled 1i


Various other putters currently in the closet,
thinking about what they've done wrong,
and how they've hurt me so.

22

#23 Rig14Port

Rig14Port

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 690 posts
  •  
  • Member #: 314753
  • Joined: 05/13/2014
  • Location:Birmingham, AL
  • Handicap:+72
GolfWRX Likes : 516

Posted 05 October 2018 - 08:44 AM

working ona  project with Spry Evo for an "over the stub flow neck adapter" for odyssey double bend putters. They already produce a bored hosel flow neck adapter here: https://www.shapeway...tionId=68809451
Epic Flash SZ 9* HZRDUS Smoke 70 6.5
TM '17 M2 Tour 15* HZRDUS Smoke 80 6.5
TM P790 UDI 2 Fujikura Pro 115i TS X
PXG 0311T 4-PW DG TI X100
Vokey SM7 Raw @ 51*, 55*, 59* DG TI S400
Cameron Flow Neck X5 / PXG Gunboat Mini H

23

#24 whitemb

whitemb

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 253 posts
  •  
  • Member #: 37943
  • Joined: 08/22/2007
  • Location:Colorado
  • Handicap:4.6
  • Ebay ID:whitemb
GolfWRX Likes : 42

Posted 05 October 2018 - 08:56 AM

View PostRig14Port, on 05 October 2018 - 08:44 AM, said:

working ona  project with Spry Evo for an "over the stub flow neck adapter" for odyssey double bend putters. They already produce a bored hosel flow neck adapter here: https://www.shapeway...tionId=68809451

That is really cool.

24

#25 Jagpilotohio

Jagpilotohio

    45+ inch drivers are evil.

  • Advanced Members
  • PipPipPipPipPipPipPip
  • 6,474 posts
  •  
  • Member #: 395936
  • Joined: 09/14/2015
  • Location:Columbus, OH
  • Handicap:1.2
  • Ebay ID:Jagpilotohio
GolfWRX Likes : 6243

Posted 05 October 2018 - 09:21 AM

View Posttonypaz, on 15 August 2017 - 12:02 PM, said:

Currently working on making one myself. I am making one for my Ghost Spider S. Took my double bend shaft off and putting in a black straight shaft that I purchased. I am going to try both aluminum and metal ones that I picked up material from work. Going to make them on my mill and bend them up to work.

TM actually made a Ghost spider S flow neck, or “slant neck”..  I have two of them. Best putter I’ve ever used.  

Find a used one on the Bay.  Will save a lot of work.

https://www.google.c...=sIbWJNUNklEg_M


Edit....didn’t realize I’m responding to a year old post....Oops.

Edited by Jagpilotohio, 05 October 2018 - 09:27 AM.

9.5* Cobra LTD,  Old school Grafalloy Blue, 43.5"
14* Cally 815 alpha fuji 665 X 42"
16* Cally 815 alpha fuji 665 X, 41.5" (set to 17*)
19* Titleist 816 H2 fuji 8.8X TS 40.0"
4-9 2016 Hogan PTx, KBS Tour V, 120X
Ping glide 2 46-12, 50-12, 54-14 (at 55) stealth, 60-14(at 61) stealth, All wedges Recoil Proto 125 F5
33.5" Ghost spider slant neck.
Srixon Z-star XV

25




Also tagged with Putter, flow neck

0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

GolfWRX Sponsors