107 replies to this topic

[cvhookem63]

Just got picked up a new Nike cart bag, so I figured it was a good time to post a WITB. The bag is set for the fall/winter season.

TaylorMade M1 430 / M2 9.5* Fujikura ATMOS Tour Spec Blue 8X (tipped 1")
Nike Vapor Fly 14* Fujikura Rombax P95X (tipped 1")
Nike Vapor Fly Pro 3i & 4i Fujikura Pro 95i Tour Spec X
Nike Vapor Pro Combo 5-9 Project X 6.5
Nike OVEN Engage 46* TI X100 | 50* SS / 55* SS (56 bent -1) / 60* DS S400
Nike OVEN Origin B2-05 long slant (naked topline/flange)

Scotty Cameron SquareBack
Nike Method Matter B2-05 (custom copper insert)
Odyssey ProType Black #2
Tad Moore Pro 1 Long Neck







Driver: TaylorMade M1 430 w/Graphite Design Tour AD MD 8TX or Tour AD DI 8X - Lamkin UTX Mid grip


3 Wood: Nike Vapor Fly 3w set to 14* w/Fujikura Rombax P95X shaft - Lamkin UTX Mid grip


Hybrid: Titleist 913H (19* set to 18.25*) w/Diamana D+ 102X - Lamkin UTX Mid grip
(switches out with 3i depending on course)


3-4 Irons: Nike Vapor Fly Pro w/Fujikura Pro 95i Tour Spec X - Lamkin UTX Mid grip


5-9 Irons: Nike Vapor Pro Combo w/Project X 6.5 - Lamkin UTX mid grip


Wedges: Current Gamers
Nike Oven Engage Square Sole 46* w/DG Tour Issue X100
Nike Engage Square Sole 52*, 56*, 60* w/DG S400


Backup Wedges:
Nike Oven 46* or Vapor Pro Combo PW
Nike Engage Square Sole 50*, 55* (56* bent to 55*) DG S400
Nike Engage Dual Sole 60* DG S400


Putters:
Nike Method Matter B2-05 w/volt


Regular Gamer:
Odyssey Pro Type Black #2 w/Super Stroke Flatso 1.0


Newest Addition:
Tad Moore Pro 1 LN w/custom stamping, sight dot. paint fill


Custom Nike RZN Tour Black CV7 Balls:


Extra Photos:

Edited by cvhookem63, 05 January 2018 - 03:06 PM.

[Viewing As Guest]

[makerofputts]

nice set up... i just unloaded the same iron set up..(heads) and the m1...

great gear

[GC70]

Looking good!

[drbonesvt]

cvhookem63, on 12 November 2016 - 05:08 PM, said:

Just got picked up a new Nike cart bag, so I figured it was a good time to post a WITB. The bag is set for the fall/winter season.

TaylorMade M1 430 9.5* Graphite Design Tour AD-DI 8X / Tour AD-MD 8TX
Nike Vapor Fly 14* Fujikura Rombax P95X
Nike Vapor Fly Pro 3 & 4 Fujikura Pro 95i Tour Spec X
Nike Vapor Pro Combo 5-9 Project X 6.5
Nike Engage SS 46* TI X100 | 50* / 55* / 60* S400
Nike Method Matter B2-05 / Odyssey ProType Black #2 / Tad Moore Pro 1 LN
Nike RZN Tour Black Custom CV7





Driver: TaylorMade M1 430 w/Graphite Design Tour AD MD 8TX or Tour AD DI 8X - Lamkin UTX Mid grip


3 Wood: Nike Vapor Fly 3w set to 14* w/Fujikura Rombax P95X shaft - Lamkin UTX Mid grip


Hybrid: Titleist 913H (19* set to 18.25*) w/Diamana D+ 102X - Lamkin UTX Mid grip
(switches out with 3i depending on course)


3-4 Irons: Nike Vapor Fly Pro w/Fujikura Pro 95i Tour Spec X - Lamkin UTX Mid grip


5-9 Irons: Nike Vapor Pro Combo w/Project X 6.5 - Lamkin UTX mid grip


Wedges: Current Gamers
Nike Oven Engage Square Sole 46* w/DG Tour Issue X100
Nike Engage Square Sole 52*, 56*, 60* w/DG S400


Backup Wedges:
Nike Oven 46* or Vapor Pro Combo PW
Nike Engage Square Sole 50*, 55* (56* bent to 55*) DG S400
Nike Engage Dual Sole 60* DG S400


Putters:
Nike Method Matter B2-05 w/volt


Regular Gamer:
Odyssey Pro Type Black #2 w/Super Stroke Flatso 1.0


Newest Addition:
Tad Moore Pro 1 LN w/custom stamping, sight dot. paint fill


Custom Nike RZN Tour Black CV7 Balls:


Extra Photos:

Sweet bag love the shafts

[cvhookem63]

I sold the AD-DI and have a Fujikura Pro Tour Spec 83 X being built. The flight on the AD-DI was higher than I prefer, so I will be interested to see how the lower launching Pro 83X works for me.

[cvhookem63]

Shot from a sloppy wet round on Saturday. The rainbow leads to where my drive landed - about 20 ft short of the green.

[drbonesvt]

Tad more is sweet !

[Baskil]

Nice setup! Love the wedges with the rust!

[lthelwpn]

Nice set up.

[cvhookem63]

Fuji Pro Tour Spec 83x came in for the driver today. Going to test it against the gamer in the morning. I also picked up a Scotty Cameron Select Squareback with some heavier weights.

[Viewing As Guest]

[ryuartz]

Nice looking setup. This umbrella might match you bag. ^^ From vapor combo to fly pro, is there big difference on feel, trajectory and distance?

Attached Thumbnails

• 

[cvhookem63]

ryuartz, on 30 January 2017 - 12:10 PM, said:

Nice looking setup. This umbrella might match you bag. ^^ From vapor combo to fly pro, is there big difference on feel, trajectory and distance?

Thanks. I have actually been looking at that umbrella or the solid photo blue one. I'll stick with my solid black one until I make up my mind.

I would say there is a noticeable difference in feel between the VPC and the VFP irons that is mostly due to the VPC being forged and the VFP being cast. It is not a huge difference, and the VFP is not harsh by any means, but if you were comparing the two different irons side by side - the VPC would feel softer than the VFP when both irons were hit in the center of the face. I haven't noticed much difference in trajectory, but I only have the VFP in my 3 & 4 irons, so I haven't compared throughout the whole set. As far as distance is concerned - the VFP irons are going to be longer than the VPC irons throughout the set because the lofts on the VFP irons are stronger by 2* in most cases. I added the specs to both below. I would say that the VFP irons have a touch more forgiveness than the VPCs. If you mis-hit the VFP irons, you can feel that it wasn't a clean strike at impact, but you don't lose a ton of distance because of it.

Edited by cvhookem63, 30 January 2017 - 12:38 PM.

[cvhookem63]

I took the Fuji Pro Tour Spec 83x out to play a round Saturday morning. It is obviously still the honeymoon phase, but this thing felt great. I was able to go after it as hard as I wanted and I never lost anything right. I kept the loft set at 9.5* upright, and the trajectory was right where I like to see it. The picture didn't focus well, but here is the shaft.



The Scotty SB should be in this week or early next, but it may be getting sent back out for some custom work. These were two items on the 2017 equipment to-do list. Knocked them out early.

[ryuartz]

Wow this is awesome. Thank you so much for reply. It helped a lot. I was thinking put VPS 3-5 along with my VPC but wasnt sure about mix forged and cast irons together. I just need more forgiveness on long irons. smh. Anyways good looking bag throughout. Good luck with a new shaft. Hit them well.

[cvhookem63]

I was lucky enough to get chosen for the Fujikura ATMOS Tour Spec testing. I chose the Blue 8X tipped 1". Unfortunately, I was out of town all weekend so I have not been able to hit it yet. Review coming soon though.

[Ed Settle]

Great looking bag! So are you drooling over the Arnold Palmer themed Stitch alignment covers? I know I am! Can't wait to hear what you think of the new shaft.

[cvhookem63]

Ed Settle, on 15 March 2017 - 08:54 AM, said:

Great looking bag! So are you drooling over the Arnold Palmer themed Stitch alignment covers? I know I am! Can't wait to hear what you think of the new shaft.

Thanks. I am as well. Those Arnie alignment covers and headcovers are pretty drool-worthy. I'd love them to make them available, but I'm not holding my breath. I've been out of town so I haven't had the chance to properly test the shaft yet, but I am planning on a range session tomorrow night and rounds this weekend.

[GC70]

Congratulations! Can't wait to hear what you think about the Atmos?
I've heard nothing be good things about it.

[cvhookem63]

Getting everything in order for some testing tomorrow evening.





I'll be using my gamer M1 430 and a newly acquired 2016 M2 - both 9.5*
I put them both on the scale and the M2 is lighter as expected. I'm going to have to add some weight either via a new sole weight or some hotmelt.

[cvhookem63]

Can't get over how good the graphics are on the ATMOS shafts

[Viewing As Guest]

Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

[cvhookem63]

Solid range testing session last night - I'll be updating my review in the ATMOS Tour Spec review thread

Edited by cvhookem63, 17 March 2017 - 09:15 AM.

[drbonesvt]

cvhookem63, on 17 March 2017 - 09:07 AM, said:

Solid range testing session last night - I'll be updating my review in the ATMOS Tour Spec review thread

Have an old school speeder vc 8.1 x , very interested in atmos

[cvhookem63]

drbonesvt, on 20 March 2017 - 08:24 AM, said:

cvhookem63, on 17 March 2017 - 09:07 AM, said:

Solid range testing session last night - I'll be updating my review in the ATMOS Tour Spec review thread

Have an old school speeder vc 8.1 x , very interested in atmos

I haven't hit the vc 8.1, so I can't offer a direct comparison, but after a range session and 27 holes in the books with the ATMOS Tour Spec Blue 8X - I am a big fan. They classify it as mid/mid, but it I would say it is on the lower end of the "mid" launch spectrum and I didn't notice any extra spin compared to my Fuji Pro 83 Tour Spec. My ATMOS is tipped 1" so it is very stable, but the tipping didn't sacrifice the smooth feeling when loading the shaft. I plan on getting it on a launch monitor at some point to get actual numbers, but I am not sure when that will happen.

From the round this weekend

[cvhookem63]

Picked up some balls to try out. Callaway SR3 Tour X and Dot.

[cvhookem63]

Well I thought I was done buying Nike equipment other than backup Engage wedges - until I found this Oven Origin B2-05 with a naked top line. It is on the way.

Edited by cvhookem63, 18 May 2017 - 08:35 AM.

[bcflyguy1]

cvhookem63, on 16 April 2017 - 03:31 PM, said:

Picked up some balls to try out. Callaway SR3 Tour X and Dot.

How did you come across these, and what did you think of them?

[cvhookem63]

bcflyguy1, on 18 May 2017 - 09:17 AM, said:

cvhookem63, on 16 April 2017 - 03:31 PM, said:

Picked up some balls to try out. Callaway SR3 Tour X and Dot.

How did you come across these, and what did you think of them?

Global Golf has (or had) them. Last I checked there were still some left in limited quantities. I like them. The Dots are a little softer and flight a little lower it seems, and they spin a little better around the green. The X's are a little firmer, spin a little less off the driver, flight a little higher, and don't have quite as much greenside spin.

[Yanki01]

solid bag man. really nice.

[cvhookem63]

Yanki01, on 18 May 2017 - 10:18 AM, said:

solid bag man. really nice.

Thanks man. I appreciate it.

[robrey85]

Boo, ATMOS...

I freaking love my ATMOS TS Black. I can't imagine how much different yours feels though. I grabbed a 6x untipped and stuck it in and the feeling is all the amazing feels.

Beautiful looking bag!

[Viewing As Guest]

Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.