Jump to content

Welcome. You are currently viewing the forum as a guest which does not give you access to all the great features at GolfWRX such as viewing all the images, interacting with members, access to all forums and eligiblility to win free giveaways. Registration is fast, simple and absolutely free. Create a FREE GolfWRX account here.

- - - - -

My indoor "putting green" project


43 replies to this topic

#1 joneser

joneser

    Tour Winner

  • ClubWRX Charter Members
  • 660 posts
  •  
  • Member #: 11390
  • Joined: 02/07/2006
  • Location:Strongsville, OH
  • Handicap:2.9
GolfWRX Likes : 189

Posted 04 March 2016 - 01:40 AM

I have seen some discussions on here concerning indoor practice greens so I thought I would share the project I finished this week.  I don't have a ton of room for something in the house so when I started researching putting greens I was looking at 12 foot and under.  I wanted something with a hole or holes that you can see the ball roll into.  I quickly found that prices could get seriously out of hand and when I got down to the $400 and $500 range I was not getting much for my money.  I decided that I would build my own.  

First thing I did was find the Toyota Camry trunk carpet that Web Simpson made famous in his Feherty interview.  The carpet was actually fairly reasonable so I was off to a good start.  I purchased it from a member here who had it for sale on eBay.  I had decided on a 4 foot by 10 foot green that I could move from room to room in the basement.  I wanted to be able to leave it in one of the finished rooms in the basement and move it out of the way when it would not be used a lot.  I ended up going with a 4x8 green instead.  This is because this thing was going to be heavy with the materials used and quite honestly, I was mostly concerned with 7 feet and in to work on our strokes.  This was technically built for my 16 year old son who has college golf aspirations.  I have however found myself using this thing a lot this week.  

I started out by building a base using 2x4's from Lowes.  I think I bought three 10 foot pieces and about five 8 foot pieces.  I also needed to have a 4x8 sheet of 1 inch thick MDF for the surface.  I ran into my first issue when I could not find 1 inch thick MDF.  I ended up buying two 1/2 inch thick pieces and would glue them together when the time came.  I layed the MDF down in the garage and built my base about 1/4 inch bigger than the MDF.  Below is a picture of the base before I took it down to the basement.
green 1.jpg

Once in the basement I trimmed the base using 1x6 poplar.  I drilled holes in the side for rope handles that I would need in order to pick this thing up off the ground on one side so it could be moved into another room.  I painted my poplar grey and then dropped in the 2 pieces of MDF.  I screwed and glued the first piece and then put the second piece down with a good layer of glue in between.  I put in some screws and nails from a finish nail gun and let it sit overnight.  I filled any screw holes in with wood filler and let that dry.  I cut holes in the MDF with a 4.25 inch hole saw and prepared to carpet.
Green 2.jpg

After letting this dry, I layed out the carpet and glued it down to the MDF using carpet glue.  I took my time to spreading with a 1/16th trowel and rolled the carpet out in sections.  I broke this into 4 pieces and when I finished I let it sit for almost 3 days.  Once the 3 days were up, I put down the quarter round on the inside edges of the green.  The quarter round covered any gaps between the 1x6 and the carpet after I cut the carpet.  It also makes it easier to get the balls off the side and end walls.  I poked a hole in the carpet with a carpet knife, and then cut slits in it with scissors.  I then took the aluminum cups I bought and forced them into the holes.  This left me with a very smooth good looking holes and it was a lot easier than trying to cut a perfect circle.  I then put 1 foot increment labels on the quarter round and called it complete.  What I have is a perfectly smooth surface that I can see will pay big dividends this year.  I have less than $300 wrapped up in materials.
Green 3.jpg Green 4.jpg Green 5.jpg glue.jpeg

Here is a link to a video which may give you an idea of the speed.

https://www.youtube....h?v=yi5ztTEdVT0

Edited by joneser, 04 March 2016 - 11:37 PM.

Taylormade M1 - Fujikura 661 Evo TS
Titleist 915F Diamana S+
Titleist 915h Aldila Rogue 85 black
Titleist 716 AP2 Project X PXI 5.5
2014 Cameron Select Newport
Vokey SM6 50f, 54s, 60m
WITB Link

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


1

#2 Shanti2

Shanti2

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 412 posts
  •  
  • Member #: 331269
  • Joined: 08/03/2014
GolfWRX Likes : 253

Posted 04 March 2016 - 02:05 AM

Great work!  Congrats!

2

#3 ekimox

ekimox

    Consistently Inconsistent

  • Advanced Members
  • PipPipPipPipPip
  • 664 posts
  •  
  • Member #: 99718
  • Joined: 12/05/2009
  • Location:Vancouver, Canada
  • Handicap:8
GolfWRX Likes : 234

Posted 04 March 2016 - 03:42 AM

Looks very well built. Good job! I'm looking at doing something like this in the near future too.
Taylormade M2 9.5* @ 7.5* Rogue 110 Silver 60x
Taylormade M2 15* VTS Red 75x
Ping Rapture DI 18* VTS Silver 85x
Ping S55 3-PW PX Flighted 6.0
Ping Glide 52* SS & Glide 58* SS
Ping Anser Milled #6 35"

3

#4 Tusk

Tusk

    Newbie

  • Members
  • Pip
  • 17 posts
  •  
  • Member #: 384576
  • Joined: 07/06/2015
  • Location:Mt. Vernon, MO
  • Handicap:+2.3
GolfWRX Likes : 22

Posted 04 March 2016 - 09:54 AM

Very nice! I might end up following your lead on this one!
Former University of Arkansas Player

4

#5 jtitleist12

jtitleist12

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 2,402 posts
  •  
  • Member #: 21919
  • Joined: 11/17/2006
  • Location:Ohio
  • Ebay ID:jtitleist12
GolfWRX Likes : 762

Posted 04 March 2016 - 10:18 AM

Looks awesome!

How quick does a putt roll on that trunk carpet?  I would think that would be lightning fast.

- Josh


5

#6 KDBeach

KDBeach

    Rookie

  • ClubWRX Charter Members
  • 44 posts
  •  
  • Member #: 235533
  • Joined: 03/08/2013
  • Location:Ohio
  • Handicap:6.1
  • Ebay ID:kbeachgs-r
GolfWRX Likes : 48

Posted 04 March 2016 - 10:25 AM

Awesome!

6

#7 Leftymoose

Leftymoose

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 845 posts
  •  
  • Member #: 243375
  • Joined: 04/06/2013
  • Location:Canada
GolfWRX Likes : 347

Posted 04 March 2016 - 10:42 AM

Nice work...am thinking of doing a very similar green at home...just need to move all the kids toys out of the way...should only take another 10-15 years.
Callaway Big Bertha Alpha 816 DBD Matrix Black Tie 7m3 X
Callaway Epic 3 & 5 Aldila Rogue Silver 70X
Bridgestone J15 CB 4-PW Project X Pxi 6.5
Titleist SM6 50, 54, 58 Project X PXi 6.5
Xenon Handmade Stealth CS
Xenon Handmade Torched CS
Xenon Prototype 3B CS
Xenon Wide X Notchback CS
Kari Lajosi TF3 Torched CS
Black Lab Carbon Oil Can Notchback Prototype CS
Anton Handmade Carbon BOS CS
Slighter Prototype Notchback CS
Mannkrafted WB Rattler XL Notchback Prototype CS
Byron Morgan B17 CS

7

#8 joneser

joneser

    Tour Winner

  • ClubWRX Charter Members
  • 660 posts
  •  
  • Member #: 11390
  • Joined: 02/07/2006
  • Location:Strongsville, OH
  • Handicap:2.9
GolfWRX Likes : 189

Posted 04 March 2016 - 10:58 AM

Couple other comments and answers.  I have been told that this would be 10-11 on the stimp.  Its quick but its not like its unrealistically quick.  The good thing about this is that the ball tracks perfectly.  There is not any of the wandering you get on some carpets.  I purchased real good quality holes from a company called Markers Inc.  I bought the aluminum holes so they make a nice sound when the ball goes in.

I did end up putting a couple more support pieces in the base.  I found that the MDF was a little flexible for my weight.  For my son it was fine.  Once I added the extra support it was rock solid.  This could have been done a little cheaper.  I used the best quality lumber and I used 1x6 poplar for sides.  I am super anal so I sanded it real good and rounded off all the sharp edges of the wood.  

My putting mirror will be in the mail tomorrow so I plan on spending some serious time on this thing before spring comes.  I wish I would have done this earlier.  If anyone knows how to post an iphone video, pleas let me know and I will try to post it.  The video will show what type of stroke you have to make for a 6 - 7 footer which should give a good idea of speed.  

If you have any questions please feel free to ask or IM me.
Taylormade M1 - Fujikura 661 Evo TS
Titleist 915F Diamana S+
Titleist 915h Aldila Rogue 85 black
Titleist 716 AP2 Project X PXI 5.5
2014 Cameron Select Newport
Vokey SM6 50f, 54s, 60m
WITB Link

8

#9 jtothep21

jtothep21

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 326 posts
  •  
  • Member #: 392076
  • Joined: 08/19/2015
  • Location:Canada
  • Handicap:18
GolfWRX Likes : 91

Posted 04 March 2016 - 11:27 AM

Upload your video from you iphone to youtube then attach a link into the forum. Hope that helps, great job on the putting green!
Driver - TM M2 Kuro Kage 60 S
3W - TM Areoburner TP Matrix White Tie S
Hybrid - Adams XTD Ti Matrix Red Tie S
Irons - Ping i200 KBS Tour 120
Wedges - Nike Engage 56/60
Putter - Custom Kingston KP1 Carbon
Ball - Taylormade Tour Preferred X
Shoes - Nike Lunar Control 4 and Nike TW 14 Mesh

9

#10 TheUpAndDown

TheUpAndDown

    One of those "youtubers"

  • Members
  • Pip
  • 7 posts
  •  
  • Member #: 413646
  • Joined: 02/26/2016
  • Location:Wisconsin
  • Handicap:10
GolfWRX Likes : 2

Posted 04 March 2016 - 11:52 AM

That looks great! Got a link to the carpet? I may try something like this.

Did you use a spray adhesive of some kind? Did you have to stretch the carpet? How much did it end up weighing?

Thanks in advance.


Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


10

#11 knudson81

knudson81

    My WITB is $100 but my swing is $.50

  • ClubWRX Media Staffer
  • 2,669 posts
  •  
  • Member #: 23000
  • Joined: 12/21/2006
  • Location:Michigan
GolfWRX Likes : 704

Posted 04 March 2016 - 11:58 AM

 TheUpAndDown, on 04 March 2016 - 11:52 AM, said:

That looks great! Got a link to the carpet? I may try something like this.

Did you use a spray adhesive of some kind? Did you have to stretch the carpet? How much did it end up weighing?

Thanks in advance.

Yeah, also wondering what carpet was used
I measure myself against other golfers by height, I'm 5'9"

Posted ImagePosted Image

11

#12 joneser

joneser

    Tour Winner

  • ClubWRX Charter Members
  • 660 posts
  •  
  • Member #: 11390
  • Joined: 02/07/2006
  • Location:Strongsville, OH
  • Handicap:2.9
GolfWRX Likes : 189

Posted 04 March 2016 - 01:13 PM

 TheUpAndDown, on 04 March 2016 - 11:52 AM, said:

That looks great! Got a link to the carpet? I may try something like this.

Did you use a spray adhesive of some kind? Did you have to stretch the carpet? How much did it end up weighing?

Thanks in advance.

I used a carpet adhesive from home depot.  It looks like a putty and you spread it with a 1/16th trowel.  I had laid the capet out for a day to let it settle and when I glued it down it I had it folded over so I could do about 1/4 of it at a time.  I took piece 12x18 piece of acrylic I have on hand and used that to apply a little pressure to smooth out the carpet onto the glue and to force the carpet up against the sides (could have used a text book or something like that).  I did not apply a ton of pressure and I did NOT have to stretch the carpet.  After about 24 hours I cut the carpet along the edges with a carpet knife and then let it dry for another 2 days before walking on it.  I was really concerned about the gluing of the carpet because the carpet doesn't have a foam backing or anything.  It took about 30 minutes total to lay the carpet with a little help from my son (very little help).  I couldn't be happier with the results of the gluing of the carpet.  When I get home I will post a picture of the carpet glue.

As far as what type of carpet, if you want more info, send me an IM.  I have no affiliation with the person but I can get you an email.  It was not overly expensive and it was a smooth transaction.  I just don't want to break any rules on here so I am not posting any email address or anything.  

The only negative of this project is the weight.  The MDF is freaking heavy.  The base with the 1x6 trim was simple to move around.  Adding the MDF made this a 2 person job to move.  I put the rope handles on one side so you can get it up off the ground onto its side.  Once on its side, you can move it around on the carpet.  Slap a couple of those furniture disks under it and it would slide around easily.  I am sure I could have used a lighter material but MDF is the smoothest thing that I know of so that is what I went with.
Taylormade M1 - Fujikura 661 Evo TS
Titleist 915F Diamana S+
Titleist 915h Aldila Rogue 85 black
Titleist 716 AP2 Project X PXI 5.5
2014 Cameron Select Newport
Vokey SM6 50f, 54s, 60m
WITB Link

12

#13 BSprink

BSprink

    Member

  • Advanced Members
  • PipPipPip
  • 91 posts
  •  
  • Member #: 273427
  • Joined: 08/28/2013
  • Location:VA
  • Handicap:4
GolfWRX Likes : 57

Posted 04 March 2016 - 01:43 PM

Looks great!  Nice job.
Taylormade M2 w/ Tour AD DI 7x
Taylormade M1 3 wood w/ Tour AD BB7x
Taylormade M1 19* Hybrid w/TourAD ad95x
Ping i200 3/4 iron w/ x100
Ping s55 9-5 iron w/ x100
Ping Glide 2.0 46* 52*  58* TI s400
Ping Redwood D66 Tom Slighter Custom

13

#14 Dr. Frankenputts

Dr. Frankenputts

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 398 posts
  •  
  • Member #: 87537
  • Joined: 07/06/2009
  • Location:Richmond, Va
  • Handicap:5.8
GolfWRX Likes : 128

Posted 04 March 2016 - 01:55 PM

Sweet looks awesome

14

#15 bjno1300

bjno1300

    Tour Winner

  • Advanced Members
  • PipPipPipPipPip
  • 619 posts
  •  
  • Member #: 139099
  • Joined: 09/13/2011
GolfWRX Likes : 47

Posted 04 March 2016 - 03:13 PM

Very nice


15

#16 Dr. Frankenputts

Dr. Frankenputts

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 398 posts
  •  
  • Member #: 87537
  • Joined: 07/06/2009
  • Location:Richmond, Va
  • Handicap:5.8
GolfWRX Likes : 128

Posted 04 March 2016 - 04:57 PM

Can you share a link or picture of the exact type of Toyota Carpet you used. Thanks in advance

16

#17 Dan42nepa

Dan42nepa

    Advanced

  • Advanced Members
  • PipPipPipPip
  • 455 posts
  •  
  • Member #: 408578
  • Joined: 01/12/2016
  • Location:Pennsylvania
  • Handicap:12.7
GolfWRX Likes : 175

Posted 04 March 2016 - 06:19 PM

are there any breaks? Or all straight putts?

17

#18 joneser

joneser

    Tour Winner

  • ClubWRX Charter Members
  • 660 posts
  •  
  • Member #: 11390
  • Joined: 02/07/2006
  • Location:Strongsville, OH
  • Handicap:2.9
GolfWRX Likes : 189

Posted 04 March 2016 - 10:44 PM

 Dan42nepa, on 04 March 2016 - 06:19 PM, said:

are there any breaks? Or all straight putts?

Flat, no breaks. I wanted this to be flat so I could focus on the stroke.
Taylormade M1 - Fujikura 661 Evo TS
Titleist 915F Diamana S+
Titleist 915h Aldila Rogue 85 black
Titleist 716 AP2 Project X PXI 5.5
2014 Cameron Select Newport
Vokey SM6 50f, 54s, 60m
WITB Link

18

#19 joneser

joneser

    Tour Winner

  • ClubWRX Charter Members
  • 660 posts
  •  
  • Member #: 11390
  • Joined: 02/07/2006
  • Location:Strongsville, OH
  • Handicap:2.9
GolfWRX Likes : 189

Posted 04 March 2016 - 10:47 PM

 Dr. Frankenputts, on 04 March 2016 - 04:57 PM, said:

Can you share a link or picture of the exact type of Toyota Carpet you used. Thanks in advance

A picture isn't going to show you anything. The carpet is too dark to really see much. It's trunk carpet and no, there are no camrys out there with bare trunks because of my project. I will be happy to share an email address for those that IM me. As I mentioned! I am not affiliated with this person at all but it's good stuff and it was easy to do.
Taylormade M1 - Fujikura 661 Evo TS
Titleist 915F Diamana S+
Titleist 915h Aldila Rogue 85 black
Titleist 716 AP2 Project X PXI 5.5
2014 Cameron Select Newport
Vokey SM6 50f, 54s, 60m
WITB Link

19

#20 joneser

joneser

    Tour Winner

  • ClubWRX Charter Members
  • 660 posts
  •  
  • Member #: 11390
  • Joined: 02/07/2006
  • Location:Strongsville, OH
  • Handicap:2.9
GolfWRX Likes : 189

Posted 04 March 2016 - 11:38 PM

I have added the picture of the glue and a link to a video.

Taylormade M1 - Fujikura 661 Evo TS
Titleist 915F Diamana S+
Titleist 915h Aldila Rogue 85 black
Titleist 716 AP2 Project X PXI 5.5
2014 Cameron Select Newport
Vokey SM6 50f, 54s, 60m
WITB Link

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

20

#21 Sec

Sec

    Member

  • Advanced Members
  • PipPipPip
  • 75 posts
  •  
  • Member #: 410698
  • Joined: 02/01/2016
  • Location:Glenodra,CA
  • Handicap:18
  • Ebay ID:Brutestrengthsupplyco
GolfWRX Likes : 23

Posted 05 March 2016 - 03:54 PM

I need to build one of these for my garage!
Adams XTD 10.5* - House Of Forged Express Stiff Shaft
Adams Tight Lies 3w 16*
Adams XTD HYBRID 20*
4-PW Maltby TE Forged Irons
Odyssey White Hot #1 with custom milled copper insert

21

#22 J_Birdie

J_Birdie

    LOFT Issue

  • Advanced Members
  • PipPipPipPipPipPip
  • 1,466 posts
  •  
  • Member #: 386108
  • Joined: 07/15/2015
GolfWRX Likes : 613

Posted 06 March 2016 - 08:31 AM

I wish I was handy and could build something badass like this.
What's in my bag:
Cobra King LTD w/ Project X HZRDUS Black 6.5 62g  44.5"
Cobra Fly-Z+ 3W w/ Aldila Tour Blue 75g X-flex  42.5"
Cobra King F6 Baffler 5W Project X HZRDUS Black 6.0 75g 42"
Srixon Z565 3i Project X HZRDUS Black 6.0 85g +1" 2* Up
Srixon Z765 4-AW Project X 6.0 +.5" 1* Up
Cleveland RTX3 2-Dot 54* (bent to 55*) & 60*  Project X 7.0 +.5" 1* Up
Odyssey O-Works V-Line Fang crank with Superstroke GT 2.0 Pistol Grip

22

#23 fmzip

fmzip

    Member

  • Advanced Members
  • PipPipPip
  • 174 posts
  •  
  • Member #: 377918
  • Joined: 05/28/2015
  • Location:CT
  • Handicap:20
  • Ebay ID:fmzip
GolfWRX Likes : 22

Posted 22 April 2016 - 09:09 PM

Nice job!

I am on the fence on using a wood frame or an extruded aluminum frame.

How level is your unit?

Is this the carpet you used?

http://www.ebay.com/...=item3d0ebc9e16

I already have Pro putt turf which is one of the best out there but the above stuff look like a cheap way out. I like to chip on mine, it has a nice backing

Edited by fmzip, 22 April 2016 - 09:28 PM.


23

#24 cota0429

cota0429

    Major Winner

  • ClubWRX Charter Members
  • 1,962 posts
  •  
  • Member #: 32528
  • Joined: 06/22/2007
  • Location:San Diego, CA
  • Handicap:0.6
GolfWRX Likes : 2550

Posted 23 April 2016 - 09:07 AM

That looks so cool.
Callaway EPIC 9* Tensei Orange TX
TM Tour Issue Yardbirds Aeroburner 15 Fujijura Rombax P95x
TM Tour Issue Yardbirds Aeroburner 19* Diamana Ion BB 83x
Srixon 565 4 iron, 765 5-6 irons, 965 7-PW w/ Project LZ 6.5
Nike Oven Engages 52, 56, 60
TM JD Spider tour 35'

WITB http://www.golfwrx.c...ked-witb-52215/

24

#25 joneser

joneser

    Tour Winner

  • ClubWRX Charter Members
  • 660 posts
  •  
  • Member #: 11390
  • Joined: 02/07/2006
  • Location:Strongsville, OH
  • Handicap:2.9
GolfWRX Likes : 189

Posted 25 April 2016 - 11:07 PM

 fmzip, on 22 April 2016 - 09:09 PM, said:

Nice job!

I am on the fence on using a wood frame or an extruded aluminum frame.

How level is your unit?

Is this the carpet you used?

http://www.ebay.com/...=item3d0ebc9e16

I already have Pro putt turf which is one of the best out there but the above stuff look like a cheap way out. I like to chip on mine, it has a nice backing

My "green" is very level.  The only time I see any break is going diagonal from one corner to another and that could be the floor.  I really wouldn't change anything about it other than the overall weight.  Its very heavy.

The link you provided is the carpet I used.  Its very thin and really does not have a backing so I am not sure it will be something you wold want to chip from.

Taylormade M1 - Fujikura 661 Evo TS
Titleist 915F Diamana S+
Titleist 915h Aldila Rogue 85 black
Titleist 716 AP2 Project X PXI 5.5
2014 Cameron Select Newport
Vokey SM6 50f, 54s, 60m
WITB Link

25

#26 dadup

dadup

    Member

  • Advanced Members
  • PipPipPip
  • 141 posts
  •  
  • Member #: 322811
  • Joined: 06/23/2014
  • Location:Des Moines, IA via Fort Worth, TX
  • Ebay ID:dadup
GolfWRX Likes : 106

Posted 26 April 2016 - 03:06 PM

wow, thats pretty cool! nice work!
910 D2
910F
910H
AP1 712 4-GW
SM4 54
SM5 56
Cleveland Classic

26

#27 Thug Hunter

Thug Hunter

    Major Winner

  • Advanced Members
  • PipPipPipPipPipPip
  • 2,451 posts
  •  
  • Member #: 20005
  • Joined: 09/28/2006
  • Location:Austin, TX
GolfWRX Likes : 1143

Posted 04 May 2016 - 02:31 PM

The quarter round is a great idea.  I may just have to do that myself.  My wife is going out of town with this kids this weekend and when she returns home the upstairs bonus will have a 6'x8' putting green, she just doesn't know it yet.
WITB Link

Titleist 915 8.5º D3 Rogue Black 70X
Titleist 915F 16.5º Rogue Black 70X
Titleist 816 H2 21º Diamana 70S
Titleist 716 T-MB 4i.......soon to be 718 AP3 4-6
Titleist 712 AP2 5-PW S300........soon to be 718 AP2 7-PW
Titleist SM6 52º & 58º Jet Black
Odyssey Black Series Tour Design #2 or #8
Titelst Lightweight Carry Bag

27

#28 greihing

greihing

    NYer in Georgia

  • Advanced Members
  • PipPipPip
  • 105 posts
  •  
  • Member #: 262516
  • Joined: 07/08/2013
  • Location:Georgia
  • Handicap:1
GolfWRX Likes : 47

Posted 04 May 2016 - 02:34 PM

I'm using this thread as a template for a birdie ball green platform. it's 14x4 though and I don't think it will be very movable. I went with 3/4 plywood instead of the mdf. We'll see how it goes. Thanks for the post/guide.
Ping G LS - UST proforce V2 7
Ping G 3 Wood
Apex 18
Srixon 965 4-PW - Project X LZ 6.5
52 Titleist, 60/64 Callaway pm grind
Black Lab BL-2 | Bellum Winmore 707 | Circa 62 #3

28

#29 greihing

greihing

    NYer in Georgia

  • Advanced Members
  • PipPipPip
  • 105 posts
  •  
  • Member #: 262516
  • Joined: 07/08/2013
  • Location:Georgia
  • Handicap:1
GolfWRX Likes : 47

Posted 06 May 2016 - 07:38 PM

Just finished:

ImageUploadedByGolfWRX Mobile1462581476.763122.jpg ImageUploadedByGolfWRX Mobile1462581491.162783.jpg
Ping G LS - UST proforce V2 7
Ping G 3 Wood
Apex 18
Srixon 965 4-PW - Project X LZ 6.5
52 Titleist, 60/64 Callaway pm grind
Black Lab BL-2 | Bellum Winmore 707 | Circa 62 #3

29

#30 smokedturkey

smokedturkey

    Member

  • Advanced Members
  • PipPipPip
  • 235 posts
  •  
  • Member #: 404708
  • Joined: 12/04/2015
  • Location:South Florida
  • Handicap:8
GolfWRX Likes : 104

Posted 07 May 2016 - 08:34 AM

I'm with you all on this subject.  I stopped around local carpet retailers looking for an inexpensive carpet remnant low pile indoor outdoor carpeting.   spent $70 on a 8 x 12 piece that rolls like Augusta National and laid it down in my garage.  It's brown, no harm no foul when car drives over it, so what a little AC condensation drops in it and its kinda nice to have soft carpeting down when I do projects in the garage.  Get a putting disc and I can roll up to 12 -15 footers in my garage now for less than $100 dollars.  My garage is now my "Short Game Training Center"   Wife loves making jokes about my carpeted garage.

Ping G400 Tour 65 S or Ping G LS Tec  Kuro Kage Silver S
TM Aeroburner HL 16.5* Stock Stiff
2017 TM M2 18* Stock S
Callaway XR 19* & 22* Stock Project X 6.0 S
Srixon Z565 5-6 / 765 7-PW   950S
Cleve 588 RTX2 - 52 & 58
Odyssey Works Versa 9
B330S / RXS / ZStar / Pro V1x

Remove This Advertisement Viewing As Guest

    GolfWRX Forums

    Advertisement


Wanna get rid of this ugly yellow box? And remove other annoying "stuff" in between posts? Create a FREE GolfWRX account here.

30



0 user(s) are reading this topic

0 members, 0 guests, 0 anonymous users

GolfWRX Sponsors