Connect with us

Equipment

‘The Claw’ and ‘Flatso’ putter grips from SuperStroke

Published

on

The ban on anchored-putting styles isn’t scheduled to go into effect until 2016, but many tour players are already preparing for the day when they can no longer lean on their long and belly putters.

It’s not even February, but we’ve already seen photos of two very successful long-putter users, Carl Pettersson and Adam Scott, practicing with non-anchored putters. If you look closely at the photos below, you’ll see that neither Pettersson nor Scott are gripping the putter in a traditional way — they’re both using a version of the “claw” grip, which places their right hand on the putter in a position that’s similar to the way they gripped a long putter.

Dean Dingman, president of SuperStroke golf, said that as the death date for anchored putters grows nearer, golfers who were successful with anchored long and belly putters will start to gravitate toward new, non-anchored putting styles. That’s why his company has released five new putter grips that will give golfers who struggle with conventional putting styles more options on the green.

39115bc594653b069ee59e15b26ea0a75c615f9df9cb7ece87c3bf51ed927011
Adam Scott with a short putter

SuperStroke’s new “The Claw” putter grip looks much like conventional putter grips, but it’s length has been stretched 2.5 inches, which better accommodates the claw style of putting.

The grip was inspired by Phil Mickelson’s experiment with the claw putting style last fall. Mickelson wanted more grip length to accommodate the position of his lower hand, which rests farther down the grip when using the claw style of putting. To do so, Mickelson cut down one of SuperStroke’s 21-inch belly putter grips to 13 inches, which gave him the length he needed as well as a reduced weight (The Claw weighs 93 grams) that gave his putter a better balance.

The Clawclaw

SuperStroke’s Flatso grips are designed in a non-tapered pentagonal shape that creates a wide flat section on the front of the grip, as well as a pistol-style ridge that give the grips a different feel than the company’s round-shaped putter grips. The Flato is available in four different styles — Flatso, Flatso Mid, Flatso DB and Flatso 17 — all with different constructions that target different golfers.

The standard Flatso has a front-section diameter of 1.7 inches, which some golfers will use to place their thumbs more parallel to each other on the wider flat section of the grip, which will level their shoulders at address. With the Flatso, golfers can also position their hands further away from each other, which will help some create a more shoulder-driven stroke.

“We noticed that some tour players were trying to get their hands closer together and level out their shoulders at address,” said Jon Luna, director of marketing for SuperStroke. “Others players asked us for more of a pistol-style feel on the back of the grip. We feel that the larger flat section gives golfers more versatility and more options on how they can putt.”

The Flatso weighs 100 grams, and like all of SuperStroke’s standard-length grips, measures 10.5 inches. The Flatso Mid is a smaller, lighter version of the Flatso, with a diameter of 1.4 inches and a weight of 60 grams. Because of it’s smaller front section, the Flatso Mid will help golfers square up the face slightly faster at impact than the larger Flatso grip.

b58bae8d17f16e1eb264399b2b090c80efc78b7886746f4c37dea21b823a301e

The Flatso DB (or Double Barrel) has the same outer construction as the standard Flatso grip, but it has two holes on the interior of the grip that will allow golfers to either add or subtract offset from their putter. If a right-handed golfer installs the grip on their shaft through the left hole, they will subtract 0.25 inches of offset from the putter, which should delay the closing of the putter face through impact — good for players that tend to miss their putts to the left. If the grip is installed through the right hole, the grip will add 0.25 inches of offset to the putter, which should speed up the closing of the face and help players who tend to miss their putts to the right.

54bf9356f112bba7f5314214ea75036eFlatso DB

SuperStroke’s Flatso 17 is a 17-inch-long version of the company’s Flatso Mid grip, and was designed to add stability for golfers who anchor mid-length putters to their leading forearm. In this style of putting, which has been popularized by Matt Kuchar, the Flatso 17 is turned counter clockwise (for a right-handed golfer) so the 1.4-inch diameter of the grip rests flatly against a golfer’s upper wrist and forearm.

24f06ec27843e39ef9024a2d64e8a7c02051536658dcc124cef3e774e50b386a

Click here for more photos of the grips and to see what people are saying in the putter forum.

6 Comments

6 Comments

  1. THONG

    Mar 15, 2015 at 4:45 pm

    They stopped making the claw grip. Best grip Ive ever used.

  2. shane spray

    Mar 13, 2015 at 4:29 am

    I have the flatso grip on my scotty cameron select newport 2. I cant wait to get my claw grip on my clevland belly putter im getting cut down it comes in tommarow!!!!! 🙂

  3. Mack N

    Jan 29, 2013 at 12:58 pm

    It seems to me that the statement on offset is backwards. The more offset should be for misses to the right.

  4. Colorado Golf Discounts

    Jan 29, 2013 at 10:20 am

    The grip with 2 holes in it if very innovative, allowing adjustment of the offset angle of the putter. Golf club designers should take note. With adjustable drivers like Ping already out, can adjustable putters be far behind? Seems like a simple gear mechanism near the shaft/blade junction would easily accommodate a slight angle adjustment of the putter blade.

  5. Troy Vayanos

    Jan 18, 2013 at 11:42 pm

    It’s good to see golfing manufacturers coming out with some new alternatives to help out golfers.

    The new grip is an interesting one that hopefully offers a good substitute for the golfers who love the longer putter.

    Being an Adam Scott fan I hope he finds a way to move back to the standard length putter and retain the same touch. His putting has always been his weak point so he needs it remaining strong.

  6. Don

    Jan 18, 2013 at 10:08 am

    Superstroke hasn’t put these on their website yet. I Really want to see the specs of the Claw one.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Interesting clubs at top of bag – GolfWRXers discuss

Published

on

In our forums, users are talking about top of bag setups that are non-traditional or thought-provoking in some way. Original poster @SuperSpurs106 inquired about other members who might use unorthodox set-ups to help with gapping issues or weak spots.

They wrote:

“I currently have a PING G430 driver, TM Qi35 3W and a TM Qi4D 7W. Driver and 7W are fine but can’t get on with my 3W and have always struggling with this club over the years. Thinking of adding a 2H which I know would look odd. Just wondering if anyone else had a weird set up at the top of their bag?”

Our members in the forum have offered up their thoughts and personal experiences with non-traditional top of bag set-ups, and their reasoning for thinking outside of the box to begin with. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • BowMain42: “Don’t worry about what “looks” odd. If the club does what you need it to do, it’s the right club.”
  • scooterhd2: “I cant hit 3 woods either. Thats why I roll with a unicorn XL Hibore 2 wood. 400 cc head at 16 degrees of loft and its just a monster 3 wood off the tee. Off the deck, we are playing the f6 baffler. 5 wood at 41.75 inches and its easy to control.”
  • phizzy30: “I had driver, 3 metal, 2/4 hybrid once upon a time as a higher ss player. 4 hybrid is gone and in place is a driving iron nowadays. I don’t think what you’re proposing is weird in anyway, however the yardage gap might be glaringly huge between driver and 2 hybrid. What is it about your 3 metal that has got you all messed up? You could always go 4 metal with shorter shaft and see if that works.”

Entire Thread: “Interesting clubs at top of bag”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Equipment

Members of the Mini Driver Club – GolfWRXers discuss

Published

on

In our forums, one user has gone searching for fellow users of a mini driver. In a post, @TightFade asked for other mini driver users to chime in with their weapon of choice, the reason for employing a mini, and what club follows it in the bag.

@TightFade asked:

“What mini are you playing? What spot in the bag did it take over? What’s the next club after it? For me: Elyte mini 13.5. Replacing 3w. Next up club looks like it’ll be 5w.”

Our members in the forum have been sharing their own bag setups featuring the mini driver, and the various reasons they purchased one in the first place. Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • RCGA: “Ping G430 Max 12* ‘Thriver.’ Next club is a 4w and 2i (I play a weird course).”
  • JMB3: “R7 at 12.75 with Diamana BB 63s. 3w replacement. Next Club: Elyte Ti 5w at 17*.”
  • ColdOkieGolf: “R7 15.5 turned down to 13.5 It replaces the 3w. I found it surprisingly easy to hit off the deck, and it’s very rare that I need or want to hit something beyond 250 from the fairway, so next club is my 7w.”
  • ChaosTheory: “I’m sub-90 MPH with driver. But I’m able to hit DOD. I have been wanting something like the R7 15.5, so I just ordered one. I have a spot in the bag so nothing has to go. But I could see it replacing my trusty 4 wood, which I never use for approach shots. Just tee shots and lay ups. If I drop the 4 wood, I will turn my 7 wood down to ~20 degrees and will have good gaps. I recently tried a thriver build: 12 degree driver turned to 14, with a heavier 44 inch shaft and added head weight. I hit it great. Very accurate and not overly high, but the problem was that it sometimes went as far as a typical drive. And that’s not what I needed. So I will probably turn the 15.5 up to 16.5 or even 17.5. It’s all theoretical at this point. ?”

Entire Thread: “Members of the Mini Driver Club…Check In.”

If you aren’t a member, join us in the GolfWRX forums today!

Continue Reading

Whats in the Bag

Chris Gotterup WITB 2026 (June)

Published

on

  • Chris Gotterup had >14 clubs in his bag when photographed prior to the Memorial Tournament.

Drivers: TaylorMade Qi4D (8 degrees), Ping G440 LST (9 degrees @8), Ping G440 LST (7.5 degrees)
Shafts: Project X HZRDUS Smoke Grey 6.5 TX 70 g, Project X HZRDUS T1100 Handcrafted 6.5 TX 70 g, Project X HZRDUS Smoke Grey 6.5 TX 70 g

Mini driver: TaylorMade BRNR (13.5 degrees)
Shaft: Project X HZRDUS Black TX 80 g

5-wood: TaylorMade Qi4D (18 degrees)
Shaft: Mitsubishi Chemical Diamana WB Wood Shaft 83 TX

7-wood: TaylorMade Qi4D (21 degrees)
Shaft: Mitsubishi Diamana WB Wood Shaft 83 TX

Irons: TaylorMade P770 (3), Bridgestone Tour B 220 MB (4-9)
Shafts: KBS C-Taper 130 X

Wedges: TaylorMade MG5 (46, 52, 56, 60)
Shafts: KBS C-Taper 130 X, True Temper Dynamic Gold Tour Issue X100

Putter: TaylorMade Spider X Tour
Grip: SuperStroke Zenergy Pistol 2.0

Grips: Golf Pride Z Grip Cord

Ball: Bridgestone Tour B X Mindset

Check out more in-hand photos of Chris Gotterup’s clubs here.

Continue Reading

Announcement

Our Privacy Policy and Terms of Use have been updated as of January 29th, 2026. Please review the updated policies here Privacy Policy | Terms of Use. By continuing to use our site after January 29th, 2026, you agree to the changes.

WITB

Facebook

Trending