Equipment
Nike 20XI / 20XI-X Balls
Review by GolfWRX writer: PhilsRHman
I received a dozen 20XI-S and 20XI-X balls with the understanding I would post my thoughts here. Thanks to GolfWRX and Nike for the chance to hit these balls and for getting product into the hands of the site’s users to weigh in.
Click here to read the discussion in the forums
About me: I’ve been hovering in the upper single digits for the past two years, but have played quite a bit this season and have dipped down to a 4.8 this summer. I’ve always looked for a performance ball at a bargain. Last year that meant the Wilson Staff FG Tour and this year it’s meant the Srixon ZStar-X. If I had my choice of any ball, it would be a Pro V-1x. I’m a very high launch, high spin player, which was proven to be true on two recent Trackman sessions at HotStix in Rye Brook, NY. My driver swing speed at my last session was 114-118 and my big issue is that my angle of attack is around 3-4*, which puts an awful lot of spin on the ball.
I’ll admit at the start, I really didn’t think I’d be able to tell the difference between one premium ball and another, but I guess the fact I’m playing a lot, and playing pretty well, combined with the fact I’ve played almost entirely with the Z Star-X this summer, and I could see very obvious differences.
I’ve noticed a lot of the other guys broke down the ball by segments, so I’ll do the same. However, I’ll rank them in order of noticeable difference.
1. Iron spin: Unfortunately, both the S and X proved to have uncontrollable spin on full shots to the greens for me. With a Pro V or Z Star, a long iron would hit and release 6-10 feet. A 7-9 iron would hit and stop and a wedge would back up 3-6 feet. Very predictable. However, over the past few rounds, I’ve been unable to control the spin on either the S or the X. At first I thought it was just the S, but today proved that the X is as tough to gauge. A long iron (5-6 iron) would hit and stop, maybe even back up 3 feet. A 7-9 iron would back up 10-12 feet, and a wedge would suck back off the green. I saw examples of a 8 iron with a X sucking back 15-20 feet off the front, as well as a 51* wedge that hit on the back of green and zipped back to the front edge (about 45 feet) although that was an S. To me, this is where the review begins and ends for me. Keep in mind, these aren’t on Augusta type greens, they’re on putting surfaces slowed down to avoid losing the greens in the Northeast heat. While the spin once the ball lands was an issue, I didn’t see much evidence of this ball ballooning into the wind, however my draw often turned from a 5-yard draw to missing the green to the left. In the past, this would be the case when I’d deloft the club at impact, which wouldn’t be the ball’s fault, but here I’d be missing pin high, which tells me it’s excess spin.
2. Green side spin: As you’d imagine, I saw some great hop and stop results with both the 20XI S and X, more so with the S. This is definitely a plus for these two balls, because the spin around the greens is consistent and if you practice enough with them I’m sure you can really dial in your chips and hop-hop-stop shots. I particularly noticed that the X performed especially well out of bunkers. Personally, I would prefer the X’s green side spin, because it’s not quite as aggressive and I found that the S had the habit of really sticking on the first hop, but again, that’s personal preference and I prefer to play a low bump-run whenever possible when just off the edge.
Click here to read the discussion in the forums
3. Driver: Here is probably my favorite part of the 20XI X. I loved driving this ball, it was very easy to work, but I never found myself losing it in either direction. I normally fight a big hook or a block right, depending on the day. The Z Star X must have quite a low driver spin because I can’t work it as comfortably as the 20XI X, so when I really have to work it, I go overboard and lose it. The 20XI X allowed me to hit subtle draws and fades. I think it’s that comfort that allowed me to also bomb away. I found the 20XI X to be consistently longer than the Z Star X, which seems counter-intuitive but proved out over numerous rounds. I put the 20XI X into some positions that I haven’t seen all season at my home course. With all that said about the 20XI X, I really don’t have any good conclusions about the 20XI S in terms of driver, but I do know that I lost several of them into the woods, so I’d say that the extra spin meant I hit them extra wild. I wouldn’t take that as gospel, however, as I sit here writing, I just never got a clearly defined sense of the S off the tee. It was OK, nothing really stood out.
4. Durability: Here’s a real asset of this ball. Sure, a well struck 100 yard shot with a non-conforming wedge will scuff, just like any premium ball. But the cover doesn’t fish gill the way some do and I would give this ball an A for endurance. Nothing longer than a PW marked up the ball, and never grated it on anything but a full wedge.
5. Feel: I know that people put so much stock in how a ball feels off the putter and off irons. I honestly never think about it, until reading a few other reviews and thinking, hmm, yeah, I guess I did notice that. Well, in terms of the S, I did find it to be soft, but not mushy (I thought the previous generation Callaway balls were very mushy). On the D, I also found it to be soft, but maybe a little more solid, if that makes sense. I guess I’d say they are both very comparable to the Z Star X since I didn’t notice much difference between any of the three. I did notice, however, that while switching between the three balls during today’s round (the final test round of about four weeks of playing them all), I couldn’t get the speed of the greens at all. I thought I just putted like a butthead, but then read another review of someone who couldn’t find green speed with the 20XI balls, so maybe I’ve got an excuse. However, yesterday I made 3 birdies in 9 holes with the X, so I can’t really blame the ball. One thing I will say, is that I dug a Pro V1x out of my bag for something yesterday and the feel was MUCH different. The Pro V had a much “deeper” feel at impact if that makes sense. Not firm or soft, just more substantial. I can’t really put it into words, just sort of the same way a really pure iron shot just feels great.
Conclusion: For me, the 20XI X does a lot of things very well, specifically its performance off the driver and its durability. But it’s very hard for me to keep a ball in play when I’m consistently frustrated with a good iron shot that ends up way short. It’s something I could adjust to I’m sure, and maybe if I was playing firmer conditions I’d welcome that extra iron spin. I also know that won’t be an issue for other players, and I think there are enough advantages to heartily suggest giving these balls a try. As for the S, I honestly don’t think it’s the right ball for my game, but in the right hands I think it’ll be a good fit.
Click here to read the discussion in the forums
With the arrival of the new groove regulations it is no surprise that companies like Nike have invested heavily in new ball technologies. The new 20X1(pronounced twenty-x-i) is the result of the combined efforts of Nike’s golf ball engineers and scientists at Dupont (makers of Kevlar and Teflon) to produce a ball that goes further with more control. Essentially they have made a high MOI ball with a more active core and a softer cover. There are two versions: a more distance orientated 20XI-X and the higher spinning 20XI-S.
The Nike balls also have a resin core than is supposed to produce a faster ball speed and a steeper spin slope that sees less spin off the driver and more off the wedge. Moment Of Inertia was the buzz word in the driver world a little while ago but this sees Nike join Callaway’s Tour i(s) and Tour i(z) by creating a ball with perimeter weighting. Not only is this supposed to produce straighter ball flight but it also means that more of the spin is preserved throughout the ball’s flight. This means it can leave the club face with less spin for more distance but also (and somewhat counter-intuitively) land was more spin than a previous generation golf ball.
All this would amount to pretty much the holy grail of golf balls – a longer, straighter golf ball that is easier to control and stop dead when you need it. So long as putting is unaffected this sounds like it could be phenomenal.
Availability is yet to be announced and as always, more information will be found at www.nike.com.
Equipment
Best ‘forgiving’ wedges – GolfWRXers discuss
In our forums, our members have been discussing the most forgiving wedges on the market. WRXer ‘aaronpoling’ lays out his current setup and what he’s currently considering, saying:
“I am looking at getting new wedges, but looking for a forgiving wedge.
I currently play Ping G25 50°, MD4 54° and 58°. I used to play the CBX2 in the 50°, 54° and 58° and liked them a lot; but like any good dad, my son took them.
I am currently looking Callaway’s CB12 and Cleveland’s CBZ. Anyone have thoughts on these? Or recommendations of other wedges that I should check out?”
And our members have been weighing in with their thoughts and recommendations in response, with one brand coming out emphatically on top.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- boggyman: “CBZs are amazing wedges!”
- drewbens: “Agreed, the Cleveland CB wedges are great! Already had a CBX Full Face 2 54 and recently added a 50 and 58 (for well under $100 a piece). Was chipping so well last week that my brother-in-law asked if the wedges were legal. Definitely underrated wedges for those of us that are not scratch golfers.”
- BogeyTed: “Get Cleveland CBX/CBZ. Very underrated clubs.”
Entire Thread: “Best ‘forgiving’ wedges – GolfWRXers discuss”
Equipment
From the GolfWRX Classifieds: Ping PLD Ally Blue Onset putter
At GolfWRX, we are a community of like-minded individuals who all experience and express our enjoyment of the game in many ways.
It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.
Currently, in our GolfWRX buy/sell/trade (BST) forum, @negncic has a Ping PLD Ally Blue Onset putter up for grabs.

From the listing: “34” Ping PLD Ally Blue Onset. Ping composite shaft Ping PLD Pistol grip. No issues. $345 shipped.”
To check out the full listing in our BST forum, head through the link. If you are curious about the rules to participate in the BST Forum, you can learn more here: GolfWRX BST Rules
Equipment
I built the worst fitting clubs ever – GolfWRXers discuss
In our forums, our members have been reacting to a WRXer who claims to have built the “worst fitting clubs ever.” ‘dlow206’ recounts his experience with plenty of insightful findings for where he can go better next time in a detailed post, saying:
“Here’s my story of building the worst fitting clubs ever (for me). And my findings of what a better fit is.
I am short in stature, as well as a very short wrist to floor of 30.5″. I went down a rabbit hole of wanting to try irons 1″ shorter of more than standard length. Given the shorter lengths, the swingweights would be super light unless I added back a ton of weight to the heads, but I don’t like adding an extreme amount of weight back to the heads, so I decided to compensate with heavier shafts (115 grams instead of 95). Played with this set for a while and was hitting all irons extremely poorly. Thin, fat, right, right, left. My swing didn’t deteriorate that much because I was hitting my driver well, woods well, etc.
Went back to my older set of irons, playing at standard length, and my iron play improved immediately. Since then, have been doing more testing, while paying more attention to different possible variables. What I have found is I actually prefer lighter total weight with relatively normal or slightly heavier swingweights. Did a recent fitting and found that 85 gram shafts were better for me than 95 grams with standard length and relatively standard swingweights.
Still trying to dial in a final iron shaft choice, so have a few contenders that I will be testing. Will be moving away from my current Steelfiber i95 S parallel to lighter and softer
- MMT 80 parallel R – worked pretty well in a limited number of swings at a fitting
- Fujikura Travil 85 R – the fitter liked the Axiom 95 R for me at Club Champion, but i didn’t love the effort required to swing them. If there was a 85 Axiom, that would probably have been a great fit. So i am going try a Travil 85 R which is japan only
- Steelfiber i80 CW R – i have been playing Steelfibers for a long time, so need to give one Steelfiber shaft a shot
Given I do club building work, I am going to build all of these shafts with the All-Fit universal iron adapters to pair with a Srixon 7 iron head for testing. With these adapters, there isn’t a swingweight issue because the amount of weight from drilling out is about equivalent to the universal adapter components.”
And our members have been sharing their reactions in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- Mikey_HACKilroy: “That length cut costs you a fair amount in swing points. I’d posit the length mattered more than the weight because a 115g shaft isn’t going to actually add enough back after cutting an inch off. Does it mean 115 would ultimately work? Hard to say. Maybe try a 1/2″ cut and add 2g to the head to compensate assuming the 7i is 37″ long. Maybe that will feel better. It translates to the same ~D2 you’re swinging at with the 95g shafts (estimated based on common weight, but you can weigh your parts on your own obviously).”
- Stuart_G: “Your process is good – keep at it and trust it.”
Entire Thread: “I built the worst fitting clubs ever – GolfWRXers discuss”
-
Whats in the Bag3 weeks agoKristoffer Reitan’s winning WITB: 2026 Truist Championship
-
Whats in the Bag2 weeks agoAaron Rai’s winning WITB: 2026 PGA Championship
-
Tour Photo Galleries2 weeks agoPhotos from the 2026 CJ Cup Byron Nelson
-
Tour Photo Galleries3 weeks agoPhotos from the 2026 PGA Championship
-
Equipment1 week agoCJ Cup Byron Nelson Tour Report: Koepka and Kim’s newest putters finally get hot
-
Equipment4 days agoDetails on J.J. Spaun’s surprise putter switch
-
Equipment3 weeks agoGolfWRX Launch Report: 2026 Titleist GTS drivers
-
Equipment2 weeks agoPGA Championship Tour Report: Fitzpatrick, Koepka among big-name putter switches for Aronimink


school tutor
Aug 8, 2025 at 1:56 pm
Hi Dear, are you truly visiting this website
regularly, if so afterward you will absolutely obtain nice knowledge.
Roger Ackerman
Mar 29, 2014 at 10:56 pm
Hi just got a Hole in one on a par 3. 136 yards with a Nike RZN X . This was at Peninsula Gulf Club Gulf Shores ,Al . They sent a Great Commemorative wall plaque with a picture of the hole,yardage, date, club. Not a thing about the ball. Do you have a way to mount the Ball . So I can Display it by by we’re it should be. After all the Ball made the hole in One . Roger Ackerman. ( my first hole in one )
Nick
Aug 20, 2013 at 4:27 pm
Just bought the 20xi-x. I normally play with the prov1x, but I’m looking for a good ball with a smaller price tag. I have a chipping green in my back yard and tried these out chipping against prov1x. The nike feels like a Slazenger raw distance off the 56* and the putter. Awful feel, hopefully I see results with it on the course.
Terry
Sep 12, 2012 at 2:01 pm
20xi-x is the worst ball I have played this summer. My swing speed is 95mph for the driver but the ball feels hard off every club including the putter and my distance much shorter and its durability is less than the pro-v, bridgestone, or sixron ball. No wonder they were half price, poor purchase even at $24.
Levi
Jul 15, 2012 at 5:51 pm
I’ve tried the 20xi ball and thought it was terrible ball it
felt terrible around the green and especially with the putter!
gticlay
May 3, 2012 at 10:03 am
@Martin – are you using conforming groove clubs or square groove from the pre-conforming days? I ask because this ball must be made to spin properly with the conforming grooves and if you play a ball made to spin with CC and use square grooves, you’ll end up doing what you did. So just curious what you are using.
thanks!
Pingback: Nike 20XI / 20XI-X Balls | Augusta Blog
Jay
Apr 30, 2012 at 6:25 pm
It’s only April and this guy is talking about summer? So you tested this ball in the summer of last year?
JaxBeachNole
Apr 30, 2012 at 5:56 pm
” I love in NE Florida,” I do love typically in NE Florida, but meant live. My apologies.
JaxBeachNole
Apr 30, 2012 at 5:54 pm
Great review. I play the X as well as some leftover Tour One Ds and think it’s as good as any ball out there.
I disagree, however, with the level of spin around the greens. I have found that the X doesn’t zip as much as the current ProV1x. I love in NE Florida and play firmer greens typically but felt that on pitches the 20XI-X rolls out a little more than the ProV1x.
It is the ball in my bag though and I am happy to see a positive review.