Connect with us

Equipment

Putting legend Kenny Knox releases line of putters, wedges

Published

on

If there ever were a golfer who knew the importance of good short-game clubs, it was Kenny Knox. The three-time PGA Tour event winner at one point held the record for the fewest number of putts in a tournament. So it’s safe to say he knows a thing or two about putters and wedges.

With those credentials, it’s no surprise that Knox would create his own line of putters and wedges.

Knox has a pair of putters for sale, each set at $269.99. The 18 and the 93 have what Knox calls a “4-3-2-1” loft. The lofts on the face decrease from 4 degrees at the top to 1 degree at the bottom. This pattern is promoted to minimize the effects of bad hand positioning by creating early roll.

With the design, the ball always come off the face with 2.5 degree loft, Knox said.

“It doesn’t drive into the ground like these other negative-loft putters,” Knox said. “It does have some loft, so the ball comes off the face softer, lands softer and then has a true roll and as a result. Distance control is more consistent.”

The differences Knox’s two putters are their offsets and finish. The 18 has a half-shaft offset and comes in chrome. The 93 has a full-shaft offset and comes in black chrome and brushed satin.

The name “18” is derived from one of Knox’s putting records, 18 putts for 18 holes, a record that he now shares with Corey Pavin. The name “93” comes from another one of Knox’s old putting records, 93 putts in a 72-hole tournament (the record has since been eclipsed by David Frost, who recorded 92 putts in an event). Another one of Knox’s former putting records, eight putts in nine holes, was overtaken by short-game instructor Stan Utley, who recorded only six putts in nine holes.

[youtube id=”tXWz6o7WF5c” width=”620″ height=”360″]

Knox also has three wedges for sale, each selling $119.99. There are 52-, 56- and 60-degree models, each weighing 303 grams.

“These were designed in conjunction with my designer and Jose Maria Olazabal,” Knox said. “What Seve taught us was to take the heel and the toe and ground those off, which raises that center of gravity. What that does, is when you hit the ball, it stays on the face longer.”

Click here to see what people are saying in the forums.

Click here to see what people are saying in the forums.

Your Reaction?
  • 1
  • LEGIT1
  • WOW6
  • LOL0
  • IDHT4
  • FLOP0
  • OB0
  • SHANK0

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

8 Comments

8 Comments

  1. Pingback: Kenny Knox Golf | Knox Putters & Wedges Featured on golfwrx.com

  2. Dalton

    Apr 4, 2013 at 9:53 am

    18 putts in 18 holes for pavin? Wait does that mean that a 300 dollar putter is useless? Since pavin uses a bullseye and which must mean it is the golfer not the equipment. So if a person spent 300 dollars on putting lessons they should be better off than having bought the new putter. However these clubs look great.

    • daniel stapleton

      Apr 9, 2013 at 11:14 am

      Looks to me like Kenny Knox hooked up with Bob from Txema. Same wedges, same putter, different stamps. Deceptive?

  3. Shawn Keough

    Feb 11, 2013 at 9:40 am

    Circa 62 # 2 anyone?

    • James

      Mar 14, 2013 at 5:47 pm

      Yeah!!! Cause lord knows Scotty never copies anyone’s designs…..

      • Deaus7

        Mar 28, 2013 at 5:23 am

        Technically EVERYBODY is copying off of Ping, and not just the Anser. Scotty for sure is not the only one in the industry to have ripped off ideas.

  4. Brian Cass

    Feb 8, 2013 at 10:48 pm

    Yawn. If my grandmother came out with a line of wedges and “custom” putters that I’ve seen a million times before I wouldn’t be shocked.

  5. Dave

    Feb 8, 2013 at 9:18 pm

    I had the opportunity to try these wedges and putter two weeks ago. I had to pry them out of the hands of my fellow golf professionals as they were so popular. The are a great product.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

WITB

Facebook

Trending