Connect with us

Equipment

Are your golf clubs falling apart?

Published

on

More people getting out to play also means more golfers are dusting off clubs that haven’t used in a while. In other cases, a lot of new golfers are getting into the game by buying used equipment, since it offers the best value to get premium gear at less-than-premium prices.

The one thing to pay close attention to when getting out those clubs for the first time or when buying used clubs, especially irons, is their condition to make sure they are in “game shape.” The first thing most golfers are going to notice are grips because they are the single connection between you and your clubs—and comfortable grips can make the difference between an enjoyable experience or hours of discomfort if they are old, dry, and worn.

If you are a DIY’er you can change grips at home with a few simple tools. Here is a quick guide video to changing grips: How to re-grip a golf club.

Tour velvet Cord Grips

One of the most important things to pay attention to from a safety perspective is if the clubs are actually still safely assembled. One of the easiest ways to figure this out is by looking at the ferrules. An older set with loose ferrules (see the title image) needs a full inspection to make sure they are safe for use.

Now, just because the ferrules aren’t seated directly against the top of the club heads doesn’t mean the clubs are a danger. They can shift over time for several reasons.

  • Hitting off mats creates a lot of extra vibration being transferred through the club that can cause ferrules to break loose from their epoxy and slowly creep up the shaft.
  • Drastic temperature changes cause expansion and contraction. Over time, this back-and-forth can also cause ferrules to come loose and move up the shaft.

A telltale sign that it’s only the ferrules coming loose and not the clubhead is the grips are still properly aligned with the heads, and (although this may seem a bit obvious) if you can twist the head and hear squeaking than 100% you should have those club heads reglued, even if it still feels like a snug fit – do you really want a trust a “snug” fit when you are swinging around a quarter-pound piece of metal on the end of a shaft traveling 90mph? I didn’t think so!

If it is only loose ferrules, they can be refit into place with either a small drop of epoxy or super glue once the ferrules are warmed up with a standard run of the mill hair drier and pushed back into place—it’s just that simple.

For more topics like this, and to discuss all things club repair, be sure to check out the GolfWRX Club Building Forum

 

Your Reaction?
  • 76
  • LEGIT8
  • WOW0
  • LOL2
  • IDHT2
  • FLOP2
  • OB2
  • SHANK21

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

1 Comment

1 Comment

  1. Jim

    Jun 12, 2020 at 4:56 pm

    Been doing re-grips at a local Public Course for over 25 years now…when I started doing them we charged a dollar a club plus grip..grips were anywhere from 75 cents to a whopping $2.75…today I re-griped a ladies clubs, charged a dollar a grip installation and her grips were $12.00 each…$156.00 for Grips? Thanks to course Manager I was allowed to give her 5 range tokens free.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 85
  • LEGIT8
  • WOW3
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending