Connect with us

Equipment

My favorite “classic” clubs from PGA Tour players’ WITBs

Published

on

PGA Tour players are just like us…except of course for the fact they are way better at golf.

Just like regular golfers, some pros have favorite clubs that stick around for a long time after they were initially released because they just work! There are several great examples on the PGA Tour, and these are some of our top picks.

Jason Dufner’s 21-degree Titleist 915F fairway wood

Dufner has always been a bit of a tinkerer, but the 21-degree 915F has been a staple in Jason’s bag since its initial release in 2015. Up until that point, the top end of Jason’s bag went driver, Titleist 913FD 13.5-degree fairway, 913FD 18-degree fairway, and then a 913H 19-degree hybrid.

Whatever it is about this club it’s still working because even now as a Cobra Staff player, this is the one club that hasn’t been replaced.

Keegan Bradley’s Srixon Z 745 irons

The Srixon Z 745s are one of the most popular Srixon irons off all time. Some might even consider them a modern cult classic. Keegan Bradley has been using these irons since they were released in 2013, and by the looks of it, has been getting hooked up with some new sets from team Srixon, even though newer models have replaced them in the line. How long they last will be interesting to see, but based on how fresh his most recent set looked at The Players, they’re not going anywhere soon.

Kevin Kisner’s 2015 Callaway Big Bertha driver

Kisner has not been afraid to tinker with gear, but his 2015 Callaway Big Bertha driver has been in his bag for as long as he has been a Callaway staff player. The other thing to note is his Apex irons are also the 2014/15 model, and just like Keegan Bradley, who is also on this list, appears to have access to a fresh stock of heads still when needed.

Adam Scott’s Titleist 680 irons

Adams Scott’s Titleist 680 irons have been well documented (Top 10 Clubs released in 2003). Although he has gone back and forth with different Titleist models in the past, the 680 have cemented themselves firmly in his bag over the last 4-5 years. Considering he used them to win earlier in 2020, I don’t expect them to go anywhere either.

Tiger Woods’ Scotty Cameron putter

There have been novels written about this putter, so I’ll keep it short. This Scotty Cameron Newport 2 has been used by Tiger for the vast majority of his wins on tour, including all but one major championship. It has seen lead tape on and off depending on green speeds over the years and Tiger’s feel preference, but the wand has not changed. This could be one of the highest value golf clubs on the planet.

Bubba Watson’s Ping S55 irons

Bubba Watson is a creature of habit when it comes to his equipment. He hasn’t changed driver shaft in over a decade (just the paint job), and it is very rare to see him change his irons. Bubba has been using Ping S55’s since they were introduced in 2013 and the irons he hung onto before that were S59’s ( Greatest Ping irons of all Time ), which were released a decade before that in 2003. I’m not sure when Bubba is due for his next change, but based in his once-a-decade schedule, he has a few more years left in these.

Daniel Berger’s 2011 TaylorMade MC irons

Daniel Berger has used a number of iron sets over the last five years, but he recently went back to his 2011 TaylorMade MC irons from high school and has played some solid golf. We documented how these ended up back in his bag here (Berger Notches Top 10 Finish with 9-Year-old irons) and considering they also made my list of TaylorMade’s Greatest Irons of all Time, they probably aren’t going anywhere.

Your Reaction?
  • 283
  • LEGIT27
  • WOW10
  • LOL3
  • IDHT1
  • FLOP0
  • OB0
  • SHANK14

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

15 Comments

15 Comments

  1. Jason C.

    May 12, 2020 at 12:42 pm

    Did anyone else notice that the weight on the Duf 7-wood is backwards?

  2. Jack Nash

    May 1, 2020 at 11:29 am

    Not a Srixon guy but they do have nice looking irons.

  3. Broton

    May 1, 2020 at 10:21 am

    Correction. Tigers putter is the most valuable golf club ever.

    • Travis

      May 14, 2020 at 1:14 pm

      Would be interesting to speculate what it would go for at auction… my guess is definitely 7 figures.

  4. joro

    May 1, 2020 at 9:56 am

    Newer is not always better. You see a lot of paid staff players with the new stuff and how great it is, then a month or so later they are back to what they really like.

  5. Brandon

    Apr 30, 2020 at 2:56 pm

    Shouldn’t all companies be able to reproduce old irons if a staff player needs some? Is there logic to just throwing away the tooling used to make them in the first place?

  6. Jordan

    Apr 30, 2020 at 10:55 am

    I’m gonna add a couple to this because I went out and built them myself:

    -Justin Thomas’ 915fd 5 wood
    -Webb Simpson’s 915hd 4 Hybrid with Steel Iron Shaft & Length

    • Jordan

      Apr 30, 2020 at 10:57 am

      Oh and Paul Casey’s MP-5’s. Built those thinking it would kick out my MP18’s, but they were not successful in doing so.

    • Realist

      Apr 30, 2020 at 2:28 pm

      Wow…just wow. U wasted your money

      • Jordan

        Apr 30, 2020 at 6:49 pm

        Nah. People want these things but don’t want to put in the time to make them. I’ve broke even or made money selling things that don’t work out playing wise.

  7. Gary

    Apr 30, 2020 at 9:30 am

    How does Freddie Couples 3 wood not make this list?

    • Mike

      Apr 30, 2020 at 10:13 am

      Or his irons?

      • Rascal

        Apr 30, 2020 at 2:19 pm

        Or Stensons…oh wait PGA tour.

        • Matt

          Apr 30, 2020 at 2:57 pm

          Stenson finally ditched that club a few months ago.

          • Benny

            Apr 30, 2020 at 6:20 pm

            Actually Stenson brought it back again and his iros are from 2013-2015 era.

            I have an identical Kisner GBB TC edition resdy for anyone who is interested.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

on

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?
  • 16
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Spotted: TaylorMade P-UDI driving iron

Published

on

It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.

We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.

From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.

“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.

TaylorMade P-UDI 3-iron – 20°

TaylorMade P-UDI 4-iron – 22°

Your Reaction?
  • 12
  • LEGIT1
  • WOW2
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Collin Morikawa WITB 2024 (April)

Published

on

Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)

3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)

Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0

Grips: Golf Pride Z-Grip Cord

Ball: TaylorMade TP5x

Your Reaction?
  • 4
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending