Connect with us

Equipment

Greatest Mizuno blade irons of all time

Published

on

Forged blade irons are generally very similar in design because of their intended purpose is to provide the ultimate ball flight control to golfers looking to execute precision shots. We can go back decades and see familiar shapes represented in clubs that were just recently released because they are a utilitarian in their function.

However, just because all blade irons in some way resemble each other doesn’t mean that some don’t stand out from the crowd the same way all two-door coupes are not created equal—although they have two doors, four tires, and an engine.

This leads us into our list of the greatest Mizuno blade irons—their intended purposes are all the same, but details make the difference, and these five all stand out from the crowd.

Mizuno Pro MS Line – Released mid-1980s

I’ll admit that this is a bit of a cop-out but we could call this entire Mizuno Pro line the grandfathers of all modern Mizuno blade irons. They came in three distinct models meant to tailor to golfers with different swing profiles and blade shape preferences—something you would never see today from an OEM because of the cost associated with producing the tooling (see catalog page below). Eventually, the MS name was dropped in favor of the MP (Mizuno Pro) moniker, and as we say, the rest is history.

Mizuno MP-29 – Released 1992

The MP-29s were available from 1992 all the way up until 2000! A remarkable run for any set of irons and something we’re probably never going to see again from any major golf manufacturer.

The MP-29s are most well known for being part of the combo set used by Tiger Woods when we won his first major championship, the 1997 Masters. The set he used consisted of 2-4 iron MP-29s and 5-PW Mizuno MP-14s, which were chosen because they offered the least amount of offset of the two sets combined.

Mizuno MP-33 – Released 2002

This curved muscle back blade was a favorite to many golfers, including future world No. 1 Luke Donald. From a design and aesthetics perspective, the MP-33 closely resembles the MS-3 blade featured off the top, but with an updated profile and sole grind.

What made the MP-33 so popular amongst better players across the board and not just touring professionals is they had a slightly lower center of gravity compared to other blade models to help get the ball in the air just a bit easier. These are 100 percent still a blade designed for workability and not forgiveness, but at the end of the day, who would say “no” to a little extra help once and a while?

The MP 33 had one of the longest runs in Mizuno iron history and existed in Mizuno’s lineup for more than four years. After its retail life ended, it was still available for custom orders many years after that.

Mizuno MP-32 – Released 2004

Two words: Cut Muscle! The Mizuno MP-32 irons were designed from the ground up to offer not just workability but a little extra forgiveness thanks to an innovative cavity design. The “Cut Muscle” cavity precisely locates the Center of Gravity while also pushing slightly more mass to the perimeter of the club in aid in forgiveness. Speaking of forgiveness, the MP-32 is just a hair bigger than other blade irons, and thanks to the Cut Muscle, also had a lower center of gravity in the mid to long irons to aid in trajectory.

They were one of the last Mizuno irons to have a full four-year life span, and are still considered one of the most innovative MP irons ever.

Check out the video below for a more in-depth explanation of why these irons are so well-loved.

Mizuno TN-87 – Released 1988

The TN-87s were named after Tommy Nakajima, who at one point was the number one player on the Japanese PGA Tour and was also a popular Mizuno staff player. The TN-87 originally came out in 1988 and to this day are still considered one of the best Mizuno irons of all time. It wasn’t just Tommy who made these irons well known, another very famous Mizuno staff player, Nick Faldo, played a set of custom blank TN-87s in 1990 to win both the Masters and Open Championship.

Considering they resemble other blade designs, including (a tip of the hat) to original Hogan models, what has made the TN-87s stand the test of time as such a beloved set of clubs.

Let’s go deeper here.

Shape and sole: For a lot of players, the TN-87 represents the perfectly shaped iron head, from blade length to toe profile, it was just “one of those clubs” that kept people’s attention. This along with the sole shape, which was considered quite modern in this era, meant a lot of people trying then instantly fell in love.

Copper Underley: Raw iron heads are made from carbon steel, but they still need a layer of chrome to help them maintain durability, and prevent rust. There are several thin layers placed on top of the steel during the plating process. The metals involved in the layering process include both nickel and copper to help the chrome stick to the head.  The copper layer became a thing of legend in golf circles for its ability to make a club feel softer. Golfers clamored for irons with copper underlay to help soften the feel and give better feedback.

With modern releases, Mizuno has offered irons with a copper underlay in the Japanese market but the MP20s are the first North American release with the extra layer in well over a decade.

The TN-87s were so revered, that in 2014 Mizuno did something few golf companies ever do: a full re-release (no custom orders) of the TN-87s from 3-PW, AW, SW. The question now is if we will ever see a re-release of any of the other irons on this list.

Have your say, GolfWRXers, what are the greatest Mizuno blades of all time?

Your Reaction?
  • 674
  • LEGIT71
  • WOW43
  • LOL14
  • IDHT8
  • FLOP8
  • OB7
  • SHANK35

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

38 Comments

38 Comments

  1. Jay

    Aug 29, 2020 at 10:37 pm

    The Original Mizuno Pro Blade is the sleekest coolest most confidence giving at address club I’ve ever seen. I traded a set of orange dot square groove ping eye 2s to a guy on my college golf team in 1988 for this set of irons. It’s just my opinion but i’ve picked up every new club made each year and none of them have tempted me to even consider purchasing them. Feel, length, work-ability…..the irons almost have an arrogance and if they could speak, they would say, “go ahead and try another set” laughingly. And so yea, the original Mizuno Pros are it for me.

  2. Bob Dixon

    Jul 21, 2020 at 8:15 pm

    I play nothing but Mizuno irons. I can’t believe that you haven’t mentioned the Pro 2 blade…best shape, metal and feel EVER. The best ever

  3. Mark J

    May 8, 2020 at 1:37 pm

    my Favorite Clubs have ALWAYS been Blades, raised on a Blade, nothing feels better, more pure, than a clean struck Forged Blade, still have my MP-33’s and play them a couple of times a year.

  4. Brad

    May 7, 2020 at 5:26 am

    Probably the most playable Mizuno blades are the ones I’m currently using, the MP-32. The most beautiful Mizuno blade I’ve laid eyes on is the MP-5, which I owned for short while. If I could hit the MP-5 long irons anywhere near as well as my MP-32’s I would game the MP-5’s until I couldn’t play golf anymore.

  5. Rob

    May 1, 2020 at 3:36 pm

    The TP originals were on sale from 1982 to 1993 – slight name change for the US version – in the UK, so slightly longer than the Ping Eye 2s.Though with being grain flow forged, you ran the risks of dead spots.

    The TP 9s had a similar run, though the copper supposedly in them did not have that much of an impact to my mind.

    And together with the MP 18s – far easier to hit than these earlier versions that it is almost a joke – these remain the only three of 16 different Mizuno blade sets that I have kept.

  6. stanley

    May 1, 2020 at 11:59 am

    i don’t know about blades. but my favorite mizuno irons are mp-30. this is the iron that got me into mizuno.

  7. mick

    Apr 27, 2020 at 1:39 pm

    69, is Actually a forgiving type blade. 60 was/is ICONIC.

  8. Joe

    Apr 21, 2020 at 2:24 pm

    No 14’s or 67’s? Come On Man!!!

  9. Robert Miller

    Apr 20, 2020 at 4:49 pm

    I’ve got MP-18’s now and they are incredible. Previous set was MP-29’s purchased around ’96 and then rechromed in 2005. Before that I was using Hogan Apex since age 15.

    Tried all the latest stuff and settled on the MP-18’s without flinching.

  10. tonks

    Apr 20, 2020 at 11:52 am

    What about the TP9. Didn`t Faldo win a major with them after developing them with Mizuno? I purchased mine about ten years ago after they had been used 4 times since 1990. I had them regripped and use them all the time. Shafts are S400.

  11. William Davis

    Apr 20, 2020 at 11:47 am

    Half the pleasure of Mizuno blades is looking at them. TPs don’t get a mention – Nick Faldo won a few things with 11. Bought new set of TP9 in about 1995. Still playable now and again for fun. Can’t face selling them.

  12. JimmyRay

    Apr 20, 2020 at 10:00 am

    I have a set of LH MS-4’s that I bought in ’86 and re-shafted 3 times. Amazing feel.

  13. jgpl001

    Apr 20, 2020 at 9:54 am

    MP-33 hands down the winner, but my best iron set ever was a set of MP-32, they stayed in my bag for 5 years…this is a lifetime for a dedicated ho
    MP-18 is under rated, its a great iron, and a future classic

  14. Shawn M

    Apr 20, 2020 at 9:43 am

    I have a set of TN-87’s from 1988. Been told they’re basically the MP 14’s.
    I use them to practice strike. Maybe one day I’ll get the courage to take them to the course.

  15. Butch

    Apr 20, 2020 at 9:39 am

    In addition to the MP blade designs mentioned Mizuno also had a TP-18 blade. I purchased in Dubai and played with for years, 3 step muscle back design, great clubs.

  16. BingHogan

    Apr 19, 2020 at 12:24 pm

    Great Article!! Thank You!

    Favorite iron is between the MP 33 and the MP 4’s. Set up on the 33’s were perfect and easy to hit. MP4’s are the best feeling irons!

    Just can’t seem to like the new MP 20’s. Not sure why I would switch from the 69’s. Tried to like them but they just doesn’t feel the same as an MP4.

    Currently playing 69’s, JPX 919Tours.

    So if Mr Vosh is on here why not do a redux MP 33 with the feel of the MP4.

    MP 60 was fantastic too!

    • BingHogan

      Apr 19, 2020 at 12:27 pm

      Correction: don’t fell the same as an MP 4. So much for all that grammar ????

  17. Andrew

    Apr 19, 2020 at 8:54 am

    Mp5s turned out pretty good

  18. Paulo

    Apr 19, 2020 at 3:20 am

    I’ve owned lots of mizuno a sets including most of the ones posted. The mp18-s deserve to be up there. They feel abs look great . Not impressed with the 20’s mind

  19. Madeline Morgan

    Apr 19, 2020 at 3:07 am

    Although there are vintage Ping Eye 2, MacGregor Muirfield, and Wilson Staff sets in the garage, the only irons I’ve ever seriously played are Mizuno. Starting with MP-30, followed in order by 33, 57, 62, 5, and now 18. They’re simply the best.

  20. MBH

    Apr 18, 2020 at 7:23 pm

    I’ve had 3 sets of Mizuno’s: MP-57, MP-63 and MP-18. IMHO they are all great, classic models. I will continue to purchase Mizuno irons until the day I can’t swing anymore.

  21. GolfMan

    Apr 18, 2020 at 6:19 pm

    What about the MP-18 ?

  22. Scott

    Apr 18, 2020 at 6:17 pm

    No doubt the MP 33’s where the best blade line as they are as good. Ow as they where back in the day! I still strip it with them! Luv em. Let you know where you are on the face all the time. And when you flush it it’s sublime!!!

  23. NRJyzr

    Apr 18, 2020 at 5:28 pm

    I would put the MS-11/MP-11 ahead of the MP-29. The latter had that lovely offset in the short irons, while the 11’s were the set that introduced a bit more bounce to blades.

  24. Chuck Woolery

    Apr 18, 2020 at 5:21 pm

    MP-33’s, period!! All others bow down.

  25. JBro

    Apr 18, 2020 at 4:43 pm

    The MP-33 and MP-37 were great, but they were the last of the flat standard lie angle. The 32s went more upright and that is what truly made them successful.

    • Jbone

      Apr 19, 2020 at 7:55 am

      Very interesting

    • ForgedMB

      Apr 20, 2020 at 10:44 am

      Actually, I believe that Mizuno changed their standard lie angles from 62° on the PW to 63° on the MP-33. The lies on all of those models that you mentioned were off of a 63° PW.

  26. Dave Bryce

    Apr 18, 2020 at 3:21 pm

    Mizuno irons are as good as anything on the market! The only irons I did not like, were the True Zoids from decades ago that I played.

  27. Garrett

    Apr 18, 2020 at 3:11 pm

    Where are the MP-4’s?? I was expecting those at the top!!

    • Shane

      Apr 20, 2020 at 9:30 am

      I have a set of the original Tzoids in my close to this day. I tried the ‘Trues’ and hated them as well. Also had some MP 14s and MP67s. I liked the 67s quite a bit.

  28. GolfMan

    Apr 18, 2020 at 1:59 pm

    Mizuno makes the best irons, hands down.

  29. Timothy Murphy

    Apr 18, 2020 at 12:33 pm

    29’s over 14’s? Not so sure about that one.

    • JR Goddard

      Apr 18, 2020 at 3:36 pm

      I felt the same way. My MP-14’s were the best clubs I ever played.

      • kfree

        Apr 20, 2020 at 7:14 am

        Absolutely. I have yet to find a Mizuno that beats the MP-14. I wish they would re-release this set.

      • Charles Leu

        Apr 20, 2020 at 1:16 pm

        +1

  30. James

    Apr 18, 2020 at 11:55 am

    The TN-87 and it’s not even close. If you have a set, as I still do, you will understand. They were gifted to me after a successful business deal when Japan was busy buying up California and Hawaii.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 5
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (3/28/24): L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a L.A.B. Golf Mezz.1 Max Broomstick putter with LA Golf Paige Spiranac shaft.

From the seller: (@hibcam): “L.A.B. GOLF Mezz.1 Max Broomstick- LA Golf Paige Spiranac Shaft- 44″/79.5. Brand new, never used brown leather cover. The head was professionally anodized from Orange to Blue (Orange looked bad with the Pink shaft so I had it changed). Only a few rounds on this combo. Please see last pic- slight ding on back corner. 8.5-10 condition. THE SHAFT COST $475/ THE PUTTER $625. $799 shipped in the US. ONLY $699 SHIPPED.”

To check out the full listing in our BST forum, head through the link: L.A.B. Golf Mezz.1 Max Broomstick with LA Golf Paige Spiranac shaft

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Spotted: Tony Finau’s driver shaft change at the 2024 Texas Children’s Houston Open

Published

on

Tony Finau has always been known as one of the longest players on the PGA Tour, but he has recently been working on adding a little more distance. Last year, Finau averaged 118.3 mph club head speed and 178.08 mph ball speed, all while playing a Mitsubishi Diamana D+ Limited 70 TX driver shaft. This year, he has increased his club head speed to 123.93 mph and his ball speed to 183.32 mph.

However, Finau’s overall distance has decreased by two yards in that time. From a fitting perspective, something was amiss. We asked Tony about the shaft change at the Texas Children’s Hospital Open.

“[I’m seeing] better numbers with the spin. My driver’s been a little high spin for me over the last month or so, and so I just figured it was time to probably check out the equipment,” Finau said. “And it definitely showed me that I was using a shaft that’s maybe a little too tip-stiff for me, the way I load the club now. [I’m seeing] better numbers with the spin.”

Finau switched from the Mitsubishi Diamana D+ Limited 70 TX into the Diamana GT 70 TX. The newer Diamana GT has a slightly different profile than the D+ Limited with the stiffest handle section in the Diamana lineup. The mid sections between the two are similar stiffness but the tip is just slightly stiffer in the Diamana GT. Both shafts are within one gram of each other in the 70 TX. The torque rating on the GT is 0.1 higher than the D+Limited’s 2.7 measurement.

Mitsubishi lists the Diamana GT as a shaft between the mid-launching Diamana TB and the new low-launch Diamana WB shafts. For most players, it would be considered a mid/low launch and low-spin shaft option. Mitsubishi’s Xlink Tech Resin System makes sure the maximum carbon fiber content is there for smooth feel without reducing the strength of the shaft. MR70 carbon fiber is used for reinforcing the shaft and boron is used in the tip for its high strength and compression properties.

Finau is still using his trusty Ping G430 LST driver in 9 degrees and has the adjustable hosel set to -1 degree of loft (standard lie angle). Finau’s long-time favorite Lamkin UTX Green grip is installed. He definitely has a few extra wraps of tape under that grip as you can see the bulge down where the grip meets the shaft.

One final note: Per Ping’s PGA Tour rep Kenton Oates, Finau’s driver is also adjusted to play with an additional degree of loft to help dial in his desired launch.

We’ll see how he fares with the new setup this week in Houston!

Your Reaction?
  • 18
  • LEGIT4
  • WOW4
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending