Connect with us

Equipment

TaylorMade SIM and SIM Max driver review

Published

on

New for 2020, TaylorMade has launched the new SIM driver family. First the lower spinning SIM then a more forgiving higher spinning SIM Max and a SIM Max D head to help draw the ball for those that need it.

We have seen the tour players using all three of the SIM drivers.

Technical Details

The SIM, SIM Max, and SIM Max D drivers from TaylorMade feature an asymmetric sole shape as well as a redesigned Inertia Generator. The asymmetric sole shape of the drivers is designed to reduce drag while providing faster clubhead speed, with the redesigned Inertia Generator redistributing weight at the very low-and-back portion of the club in a bid to provide improved forgiveness.

The SIM Max D clubhead contains a heel-bias internal weight with a topline masking to make the clubhead look more open at address to help golfers who struggle with a right-miss.

Other features of the SIM, SIM Max, and SIM Max D drivers includes a speed injected twist face, inverted cone technology, a thru-slot speed pocket, multi-material construction and an adjustable loft sleeve.

Exclusive to the SIM driver is sliding weight technology which allows face angle and flight bias preferences of up to +/-2° loft change and up to +/-20 yards of draw-fade bias.

(Top Left to Right) 2020 TM SIM Max & 2019 TM M6, (Bottom Left to Right) 2020 TM SIM & 2019 TM M5

Reviews

Here are the individual reviews from GolfWRXers’ trip to The Kingdom.

Tester: Rob “osubuckeyes691

I’ll start by saying this. SIM is very good. It’s not a magical 30 yards like everyone is talking about here. That comes from being properly fit. But it is good, and with a proper fitting I’d be shocked if you couldn’t find at least slightly better numbers with SIM over any gamer you have.

My current set up is a Callaway Epic Flash SZ Double Diamond with a Fuji Ventus Black 6x. LOW LOW LOW combo…and I still hit it high haha. I live in the low to mid 170s ball speed with spin sometimes getting up to 2700 2800. Drives I hit well, spin around 2100. My miss is a big push slice.

But it is good, and with a proper fitting I’d be shocked if you couldn’t find at least slightly better numbers with SIM over any gamer you have. -Rob

I ended up being fit in to a SIM 9* with the new KBS Tour Driven 70 Category 5. This shaft is super interesting. It’s really hard for me to describe but it has feel, and a lot of it. Spin dropped to about 2400 on my miss right and really, that’s what I was hoping would happen. I wanted something that when I missed, wouldn’t lose me 30 yards. We put the weight in the heel and it really did help straighten out the miss. Huge advantage for me. I knew as someone who swings 120ish I wasn’t going to pick up 20 yards. I wanted to reduce my miss and that’s exactly what SIM was able to do for me.  Here is a link to his post in the forums.

Tester: Will “fillwelix

For my driver fitting, I was with Perry, who was a blast to get to work with. I started by hitting my gamer on Trackman, talking with Perry about what my misses usually are, and what I wanted to get out of the fitting.

I usually don’t have a problem with distance so I told him the biggest thing I was looking for was a tighter dispersion. I don’t have the trackman numbers yet but with my gamer, I was averaging about 110 club head speed, 160-something ball speed, 270-275 carry, 285-290 total. Launching a bit too high but spin was okay.

The thing was seriously nuclear. My club head speed bumped up only about 1 or 2 MPH, but the launch and spin were incredible, as well as ball speed. I topped out at 170 ball speed, which I had never gotten before. -Will

We tried the 10.5 SIM in a Ventus Black 6x, and he gave me a couple tips in my setup, because my AOA was something like 4 or 5 degrees up. The thing was seriously nuclear. My club head speed bumped up only about 1 or 2 MPH, but the launch and spin were incredible, as well as ball speed. I topped out at 170 ball speed, which I had never gotten before. Carrying 295-300, total of 315-320. One shot carried the fence of the driving range at The Kingdom.

Spent some time going through different shafts to see if there was an improvement, played with weights, etc. but the best numbers were with the 10.5 SIM with Ventus Black 6x and the weight all the way in the toe, because my miss is usually left. Here is a link to his post in the forums.

Tester: Nick “n_rones

I started off with my fittings working with Joe. After some warmup we started with the drivers. Coming in I was playing a Srixon Z785 with a Hzrdus black 6.5 70 gram shaft at 45 inches.

I’m a really tough fit because I have an unusual swing and hit down on the ball heavily with every club. My AOA with the driver was between 5 and 7 down which is pretty nuts I always knew I hit down on it but not that much. I’m still waiting on the trackman date to be emailed to me but with my own driver I was somewhere in the neighborhood of 109 swing speed with a launch angle of 4 degrees and 4000 spin (Ridiculous I know right).

I was able to take it on the course with me that afternoon and hit 12-14 fairways a new record for me and ever ball was easily 15-20 yards longer than I was used to. -Nick

His main goal for me was to get launch up and spin down. The first club he handed me was the Sim 10.5 turned up to 11.25 with a Graphite design IZ 7x. Instantly my launch angle increased and spin dropped. We then went through a few other shafts like graphite design ad di 7x. We came back to the IZ and with a quick change in tee height we ended up where we wanted. We knew with my angle of attack we were never going to get me to super low spin and high launch we just wanted to get it to a manageable number.

By the end of the fit I was hitting the sim with the iz under 3k spin with a couple down at 2500 and 9 degree launch increasing my carry from the 244 range up to the 260-265 range on good swings and we neutralized my cut massively. I was fortunate enough to finish my fit while other guys were still busy so we went right into the build shop and he built me my driver on the spot and gave me a super cool kingdom exclusive headcover. I was able to take it on the course with me that afternoon and hit 12-14 fairways a new record for me and ever ball was easily 15-20 yards longer than I was used to. Most of that is me never being through a proper fitting before but a big factor was I was able to get into the sim head with high loft but it was a great spin killing head for me. Here is a link to his post in the forums.

Tester: “jimbonecrusher”

I am one that gained a good bit of ball speed from getting fit for the SIM driver. My gamer is a Titleist 915D3 9.5* with a Rogue Silver 70X. I wasn’t fit for the driver as I just bought the parts off of the BST. I always felt that I lost yardage due to high spin. The Trackman didn’t lie as I was getting 166mph ball speed and 3000 rpm of spin on well-struck shots. Where this posed a problem was when I was off-center, the ball would be a high right spinner that would lose a lot of distance. 

Where I saw great gains was in dispersion. TwistFace just flat out works. Toe shots came back to closer to center, and heal shots faded right back towards center. I also didn’t lose as much yardage. I did pick up about five mph in ball speed. There are a plethora of reasons for this gain and the resulting 20 yard gain in ball flight.

Some could attribute the gain to almost 30 feet of height in ball flight. It could also be because there was 300 less RPM, or over a degree increase in launch angle. Either way, it has proven to me that getting fit by a knowledgeable fitter is crucial. This is the first time that I have been fit for a driver. All the expectations of mine going into this fitting have been met.

The SIM is forgiving. The SIM is aerodynamically superior to what I have been playing. The SIM just flat out performs for me because it doesn’t balloon, it is forgiving on mishits with good direction and ball speed, and it reduced my spin rate. – 

The sounds of the SIM line is amazing. The solid “thwack” sound it makes at contact is extremely welcoming. Gone are the days of high pitched aluminum baseball bat sounds. Now, some sounds just sound perfect to me. Johnny Wunder posted a video on Instagram of me hitting a driver, and you can hear the sound. Here is a link to his post in the forums.

Your Reaction?
  • 61
  • LEGIT12
  • WOW7
  • LOL3
  • IDHT2
  • FLOP3
  • OB2
  • SHANK36

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

1 Comment

1 Comment

  1. Pingback: The best TaylorMade drivers of all time – GolfWRXers discuss – GolfWRX

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

TaylorMade BRNR Mini Driver Copper: Leveraging 90s nostalgia

Published

on

TaylorMade is leaning in even further to the retro vibes with the 2024 edition of its BRNR Mini Driver.

Patterned after the Carlsbad-based company’s iconic late 1990s Burner driver design, the 2024 BRNR Mini features similar copper styling and a retro version of the TaylorMade logo.

Featuring the same technology as its 2023 BRNR Mini Driver, the 2024 edition continues to play the hits that saw the unique club land in the bag of tour pros, such as Tommy Fleetwood and Jake Knapp.

Why play a mini driver?

In general, TaylorMade finds two types of golfers gravitate toward a mini driver. In the first case, it’s an addition to a standard driver: Players looking for a “fairway finder” driver without giving up too much distance that can also be hit off the deck. Second, TaylorMade recommends giving a mini a go to golfers who struggle to hit 460 cc drivers, particularly choppers. It’s a better alternative than a 3-wood off the tee.

Tommy Fleetwood’s endorsement of playing a mini driver

“For me, if I HAD to hit a fairway, I’m more comfortable hitting a driver than a 3-wood. I would tee the driver down, and I would hit a little cut, or a neck-y cut in the fairway. The 3-wood isn’t for that. The 3-wood, generally, is a pretty hot club that I’ll hit from 270 or 280 in the fairway on a par 5. You get some courses where a 3-wood is not always necessary. [With the BRNR] you put a normal swing on it, and I’m more comfortable hitting it straight. It’s a replacement for a 3-wood, basically.”

Pricing, specs, availability

TaylorMade’s new BRNR Mini Driver Copper clubs will sell for $449.99 in 11.5 (RH/LH) and 13.5 (RH) degree options, and they will be available for custom orders.

Your Reaction?
  • 41
  • LEGIT3
  • WOW6
  • LOL3
  • IDHT0
  • FLOP1
  • OB0
  • SHANK4

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/5/24): I think I ‘Blacked Out’ trying to love these irons

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a set of blacked out P770 irons

From the seller: (@hammertime1515): “Just one single iron set up for grabs today. Got these right before they quote selling them at the end of February. Only played 3 full rounds with them and a couple short range sessions. 7 iron shows the most wear and 8 iron has a sandy mark on the toe (ball striking out of winter wasn’t the strong suit) Just not right for me no matter how much I wanted them to be. Price is shipped and OBO……

P770 Black Out irons. 4-PW. —New Tour Velvet Align Midsize Grips —1/2” over TM standard —2 degrees upright —Standard Lofts —Dynamic Gold 105 X100 shafts —PW has never been hit, most of them have been hit sparingly. Tried to capture the wear on the 7 iron and the toe mark on the 8 iron the best I could. Soles have virtually no scratching from use and no bag chatter. -If more pics are needed just ask ——PRICE: $1000 OBO” & Shipped

To check out the full listing in our BST forum, head through the link: Blacked out P770 irons

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Kevin Chappell WITB 2024 (April)

Published

on

Driver: TaylorMade Qi10 (10.5 degrees)
Shaft: Project X Denali Black 60 TX

3-wood: TaylorMade Stealth 2 HL (16.5 degrees)
Shaft: Fujikura Ventus TR Blue 7 X

7-wood: Cobra King LTDx Prototype (21.5 degrees @20.5 degrees)
Shaft: Fujikura Ventus Black 9 X

Irons: Srixon ZX (3), Cobra King CB (4-PW)
Shafts: True Temper Dynamic Gold Tour Issue S400

Wedges: Titleist Vokey Design SM6 (52-08F, 56-10S), Cobra Snakebite (60)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Scotty Cameron SB-2, Scotty Cameron TourType TG6.2
Grip: SuperStroke Traxion Flatso 1.0

Ball: Titleist Pro V1x

Grips: Golf Pride MCC

Check out more in-hand photos of Kevin Chappell’s clubs here.

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending