Equipment
An introduction to haywoodgolf
Recently, I was in Vegas for some golf with friends (promise, it was golf only). During my round, I, unfortunately, broke a shaft on a root and had to get it re-shafted. Luckily, my buddies at Club Champion were there to help, and while the club was being prepped and set, they showed me a prototype head from a company in Canada by the name of haywoodgolf. The club had a sleek look, and because I was unfamiliar with the brand, and intrigued, I reached out to the company to learn more.
This story is about my experience with Joshua Haywood and his company.
The haywoodgolf story
Joshua, a long-time golfer, started haywoodgolf out of frustration after visiting his local Golf Town, Canada’s version of Golf Galaxy, to buy a new set of wedges. After exploring all the options and testing the few clubs he found visually appealing, he priced out a set that cost around $600 CAD.
After a little deliberation, and walking out of the store empty-handed, Joshua came to the realization that there must be a way to reduce the cost of clubs while maintaining the integrity and quality golfers have come to expect. After months of research, and dozens of prototypes of forged wedges tested in different conditions, Joshua officially launched haywoodgolf.com in June of 2018. With a select product release of non-conforming wedges, which offered the average golfer more spin and control, buyers were responding very positively to their quality, modern and minimalistic designs, which cost only half the price of the major OEMs.
As the team listened to feedback from existing users and from folks that decided against purchasing, they started working on the new design of their signature series forged wedges as well as their two-piece stainless steel game improvement signature irons, which have been tested and approved as conforming to the rules of golf by the R&A. The clubs are offered in both right and left-handed and have black and silver finish options.
With the wedges starting at $99 USD and iron sets at $650, I needed to find out if they measure up to what I had in my bag.
Testing of Signature irons
Josh kindly sent me a haywoodgolf signature series 7-iron, which I fitted with an Accra 70i R-flex shaft, measuring 37” inches long and 30 degrees of loft. This data was collected at Golf Galaxy in Wesley Chapel using Foresight and was compared to my personal 7-iron; a Cobra Forged Tec 37” iron with Accra 70R with a 29.5 degrees loft. Here are the numbers
Beyond the testing at Golf Galaxy, I actually used the club for almost two weeks, hitting range balls plus many shots on the course.
Bottom line, what did I think?
To be honest, I was shocked in the most positive way at the performance. I saw from my testing that they matched up to the major OEMs, while being almost half the cost. I’m very fond of its clean look, and even including the little-bit thicker top line it has (similar to the G700 or TaylorMade 790) along with a touch more offset than I’m used to. The club is hollow-body design, not foam-filled, and I noticed no difference in feel or distance versus a club like the P790, which are, and I have hit multiple times. I really enjoyed hitting the haywood iron, which feels very solid and has a crisp sound to it.
I consider these clubs to be one of the best bang for your buck sets of irons on the market. Haywood Golf has created an excellent product, and I think players looking for a new set would be wise to consider their products.
- LIKE237
- LEGIT49
- WOW28
- LOL8
- IDHT8
- FLOP9
- OB6
- SHANK27
Whats in the Bag
Steve Stricker WITB 2024 (April)
- Steve Stricker WITB accurate as of the Zurich Classic. More photos from the event here.
Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X
3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX
Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X
Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5
Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore
Putter: Odyssey White Hot No. 2
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Grip Rite
Check out more in-hand photos of Steve Stricker’s clubs here.
- LIKE7
- LEGIT1
- WOW0
- LOL0
- IDHT1
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Alex Fitzpatrick WITB 2024 (April)
- Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic.
Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX
Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)
Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X
Putter: Bettinardi SS16 Dass
Grips: Golf Pride MCC
Check out more in-hand photos of Alex Fitzpatrick’s clubs here.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss
In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.
Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.
- PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
- driveandputtmachine: “Still playing a MIni 300. The head was only 208, so I ordered a heavier weight and play it at 3 wood length. I am playing a Ventus Red 70. I play 70 grams in my fairways. I use it mainly to hit draws off the tee. When I combine me, a driver, and trying to hit a draw it does not work out well most of the time. So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck. The 300 Mini is very good off the deck.”
- JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”
Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”
- LIKE3
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK4
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole4 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole4 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 weeks ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole2 weeks ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 week ago
Brandel Chamblee has ‘no doubt’ who started the McIlroy/LIV rumor and why
Geoff
Jan 14, 2020 at 7:12 am
If you like these guys you’ll really love golfworks. Their maltby clubs have been around forever and they have very simple but beautiful designs at even better prices than seen here. Can get a wedge with premium shaft for $60.
westy
Jan 14, 2020 at 4:57 pm
Nice. Dude is going after it, way to hijack.
Mark
Jan 14, 2020 at 1:05 am
On a site like WRX, I suspect there will be many readers, like myself, who want to know more about who designs them and the process for selecting a manufacturing resource. (I doubt Haywood has the volume required to do business with Tier 1, Taiwanese-owned, China-based manufacturers.)
Dan
Jan 14, 2020 at 1:10 pm
I found something similar to their irons and wedges on alibaba. Very likely that they didnt do the design and just stamp their logo on them.
Eric
Jan 14, 2020 at 3:06 pm
How can you make such a statement like this (Alibaba) without any concrete evidence? Not fair in my book to the owners, who may have done a lot of work on the design and securing a producer.
Looks like great stuff, the best of luck to this company?
Dan
Jan 15, 2020 at 2:27 pm
Its not like u have the any evidence that the owners actually design their irons.
William
Jan 15, 2020 at 7:19 pm
And Its not like you have any evidence that they don’t.
Jim
Jun 17, 2020 at 6:27 pm
https://www.aliexpress.com/item/4000482009668.html?spm=a2g0o.cart.0.0.35ae3c00oCEbsj&mp=1
And you can find any grind, loft, etc model of Vokey you want on AliExpress. The owner was actually selling OEM Aliexpress rangefinders in Vancouver locally before then – so he knows his way around Chinese sourcing.
haywoodgolf
Jan 13, 2020 at 7:08 pm
Here there – haywoodgolf here.
We appreciate you checking out our site.
If you select the last photo on the irons page, that is the spec sheet, and then you can click the actual photo itself in the larger format and it will zoom in for you to make the spec sheet very clear.
SV677
Jan 15, 2020 at 2:39 pm
Sorry, I missed that. Thanks.
SV677
Jan 13, 2020 at 2:38 pm
After reading your article I thought I would click on the link to learn more about Haywood’s products. Their site gives different options when purchasing, but since they give no specs for the irons it is impossible to know if one would want a longer or shorter iron or have the lofts changed, which are options they offer. Being a left-handed player I am always interested in new alternatives, but I anticipate a company actually giving me information about their product.
Johnny Penso
Jan 13, 2020 at 6:05 pm
Specs are there. Click on a set and on the bottom left where you see the various angled shots of the clubs are the specs. It’s tiny, but if you click on it you can read it…barely.