Connect with us
2020-titleist-t100s-iron 2020-titleist-t100s-iron

Equipment

Titleist T100-S irons: Calibrated for distance

Published

on

The best way to describe the new T100-S irons from Titleist is: More speed, stronger flight, same package.

In the late summer of 2019, Titleist released the completely re-engineered T-Series irons that included the T100, T200, and T300. The T200 and T300 both offer new Max Impact face technology to increase ball speed and launch, while the T100’s greatest performance feature is extremely high MOI in shrunken down player-preferred look—it quickly made the T100’s the number one iron model on the PGA Tour.

T100 (top), T100-S (bottom)

Every bit of technology is the same, from the thinner, more responsive face, co-forged dual-density tungsten, to the shape and sole design. The goal was not to reinvent the wheel—just refine it. Similar to the way a Porsche offers a turbo S, but in the case of T100, everything is exactly the same under the hood.

This popularity caused the Titleist iron design team to take a second look at fitting requests, and consult with their large network of TPI fitters to find out if they could do even more to help in fitting players’ wants and needs.

One of the biggest requests was to make the lofts slightly stronger on the T100’s to put them closer inline with the specs of the T200 & T300 for a number of reasons:

  • For players that have grown up with strong lofted irons and lower spinning multi-layer balls, they wanted to see a stronger flight. The issue with just bending them strong is reducing the bounce and increasing offset.

T100-S (left), T100 (right)

With the popularity and performance of the entire T-Series, it lead to a spike in combo sets being built along with some needed loft tweaking to dial in ball speed numbers between the three models. Rather than increasing loft on the longer irons and producing higher spin, the new T100-S allows the shorter irons to maintain stronger lofts without excess bending.

“As we were launching the new T-Series, we met a lot of golfers who were really excited about T100 but had become accustomed to playing stronger-lofted iron sets. It would have been really easy to just take T100’s and bend them stronger for those players. But by doing that you start to sacrifice the incredible feel and turf interaction … So our engineers went back and redesigned each individual iron to give these players the stronger lofts and distance they’re looking for, while preserving the performance of that pure forged shape and sole.” – Josh Talge, Vice President, Titleist Golf Club Marketing.

New T100-S Specs Vs Standard T100

Stock Shafts and Availability, and Price

T100-S stock shaft is the True Temper Projext X LZ, but just like all Titleist products they offer an expansive number of custom shaft choices, many at no up-charge. The price is $1,399 for an eight-piece set which works out to $175 per club.

They will be available in golf shops worldwide beginning March 27, with fittings beginning March 12.

 

Your Reaction?
  • 118
  • LEGIT9
  • WOW1
  • LOL5
  • IDHT1
  • FLOP3
  • OB4
  • SHANK50

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

20 Comments

20 Comments

  1. Rob

    Sep 4, 2020 at 2:53 pm

    How about this, let’s shaft the original t100 one club different, So we can put the 9 iron head in a PW shaft. We’ll just call it a PW and That will net 4 degrees stronger.

    Bam…..we’ve got the new t100SS model

  2. Nate

    Jan 17, 2020 at 7:19 pm

    Can’t wait to bend these 2 degrees strong.

  3. Moosejaw McWilligher

    Jan 17, 2020 at 7:13 pm

    I hate when companies offer more options.
    I hate when new products come out on a regular basis.
    I hate marketing and believe it to be all lies and money-grabbing.
    I do not believe in technology or improvements over time, unless they are “completely new”.

    I am a rabid defender of capitalism and believe corporations should be free to do whatever they want.
    Words like “socialism” and “regulation” make me so scared they give me bowel disorders.

    I am not in the least bit a hypocrite.

  4. Tom

    Jan 17, 2020 at 6:56 am

    So is the bounce still decreased? The article touched on this but it never said bounce and turf interaction are the same as the regular T100.

    • Josh

      Jan 20, 2020 at 3:30 pm

      Dude, no. They made new molds (how they justified this expense is beyond me) for all the irons to keep the standard bounce at the jacked lofts.

      I did notice this when I was looking at the specs to dream up a combo set with T100s in the short irons and noticed the T200 has jacked lofts.

  5. L

    Jan 16, 2020 at 9:36 pm

    They didn’t sell enough of the 100 so they went stronger. Laughable.

    • Greg

      Jan 17, 2020 at 1:48 pm

      I know, right? OEMs just jack up the lofts and claim that the new clubs are “the longest ever.” Of course they are- you just turned a wedge into what was an 8 iron in 1995. Where does it end? When you have to be single digit to get a 5 iron off the ground?

  6. Robert

    Jan 16, 2020 at 5:04 pm

    Every swing is different. I think more options during the fitting process is a good thing and it’ll make it easier to blend with the t200’s. Don’t see an issue here.

  7. Chuckee Cheese

    Jan 16, 2020 at 4:05 pm

    Or, you can save bank and buy a solid set of 2017 AP3’s which have the exact same specs as the 2020 Turbo generating Double S T1 hunnerd’s!

  8. Ping Pong Playa

    Jan 16, 2020 at 1:15 pm

    Will the nonsense marketing ever end?!! I want the Twin Turbo Super Duper Red SS models due out in 3.5 months! I want a 15 degree 3 iron!! Come on guys, REALLY!!

  9. DJ

    Jan 16, 2020 at 11:23 am

    I like it cause it blends to the T200 irons better. I’ll take the T200 6(27), T100S 7(32) and 8 (bent to 37), T100 9(42). Throw in my TM PW(47), GW(52), and SW(58).

  10. Rory

    Jan 16, 2020 at 10:27 am

    Most people carry a 58/60 wedge, a putter, driver and 3w. That gives you 10 clubs to fill on the gap between the 3w and the wedge. Does it really matter what each club says, or that is fits the gaps????

    • Acemandrake

      Jan 16, 2020 at 4:02 pm

      Equipment is trending toward very individualized customization. Types and number of clubs will vary from player to player.

      It’s a fun experiment to see which clubs are essential & work best for you.

  11. dat

    Jan 16, 2020 at 9:56 am

    Why not crank them down as low as humanly possible so I can hit my 7 iron 300 yards?

  12. JD

    Jan 16, 2020 at 9:50 am

    This is so dumb. Why do people pay attention to numbers on the head. I can hit my MP-14s just as far and well as this. Who cares if my old 6 iron is a 7 iron today?

    • the dude

      Jan 16, 2020 at 9:17 pm

      I agree, but golfers have these “things” called ego’s……..and well ya know. And I’ll bet my nut bag that the cat who drives the porche S…..has the biggest ego of them all…..his PW is 41*

  13. joe

    Jan 16, 2020 at 9:19 am

    SPIN IS YOUR FRIEND. I don’t understand the search for low spin and strange flight.

    • Alex

      Jan 16, 2020 at 1:25 pm

      Exactly. Its only not your friend hitting driver longer and into wind. I for one like holding greens on par 3s and 4s.

    • Test

      Sep 4, 2020 at 11:43 am

      Spin helps you stop the ball. But there’s a level of over spin that’s unnecessary and actually hurts distance consistency on the green. I don’t want to spin back 9 irons 10 yards, it makes a gap in yardages I can hit to on the green.

      Most players do not want 9000+ rpms on a 9 iron, especially at high launch and decent angles.. 8000 will stop dead at over 45% decent, and give you extra carry yards. That’s why people want to optimize spin.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 4
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending