Connect with us

Equipment

Forum Thread of the Day: “Patrick Reed’s custom Scotty Cameron Captain America putter”

Published

on

Today’s Forum Thread of the Day showcases Patrick Reed’s custom Scotty Cameron Captain America putter. The Texan had the putter made for the 2018 Ryder Cup and didn’t put it into action, but Reed has the flat-stick in the bag this week at the Hero World Challenge, and it’s serving him well as he sits atop the leaderboard at the halfway mark.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say on the putter at the link below.

  • JBull1011: “Awesome looking putter!”
  • Cmiller6868: “My dream putter. This putter gets better looking every time I click on it.”
  • SubaruWRX: “I know it’s picky, but I wish he’d done white paint fill in the middle dot.”

Entire Thread: “Patrick Reed’s custom Scotty Cameron Captain America putter”

Your Reaction?
  • 26
  • LEGIT6
  • WOW0
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK10

Gianni is a freelance writer. He holds a Bachelor of Arts as well as a Diploma in Sports Journalism. He can be contacted at gmagliocco@outlook.com. Follow him on Twitter @giannimosquito

2 Comments

2 Comments

  1. Chuck D

    Dec 8, 2019 at 10:16 pm

    ……and a lying cheater! That actually would work on the putter!

  2. the dude

    Dec 8, 2019 at 8:52 pm

    ….o.k PR…you’ve officially taken this Captain America BS a bit too far…..

    secondly, only a total dork would put their “nickname” on their putter.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Mark Leishman’s winning WITB: 2020 Farmers Insurance Open

Published

on

Driver: Callaway Mavrik (9 degrees)
Shaft: Fujikura Speeder 757 Evolution IV TX (45 inches, tipped 1 inch, D2 swingweight)

3-wood: Callaway Epic Flash Sub Zero (16.5 degrees)
Shaft: Fujikura Atmos Black Tour Spec 9 X

5-wood: Callaway Rogue Sub Zero (18 degrees)
Shaft: Fujikura Motore Speeder VC Tour Spec 9.2 X

Irons: Callaway X-Forged UT (3), Callaway Apex Pro 19 (4-6), Callaway Apex MB (7-PW)
Shafts: Nippon N.S. Pro Modus 3 Tour 130 X (hard-stepped)

Wedges: Callaway Jaws MD5 Raw (54.10S @54.75, 60.08T @ 59.75 degrees)
Shafts: Nippon N.S. Pro Modus 3 Tour 130 X

Putter: Odyssey Versa #6 (Black/White/Black)

Ball: Callaway Chrome Soft X

Grips: Golf Pride MCC

Your Reaction?
  • 32
  • LEGIT6
  • WOW3
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Lucas Herbert’s winning WITB: 2020 Omega Dubai Desert Classic

Published

on

Driver: TaylorMade SIM (9 degrees set at 8.75)
Shaft: Mitsubishi Diamana DF 70TX

3-wood: TaylorMade SIM (15 degrees set at 15.5)
Shaft: Mitsubishi Diamana DF 80TX

5-wood: TaylorMade M6 (19 degrees set at 19.5)
Shaft: Mitsubishi Tensei CK Pro White 90 TX

Irons: TaylorMade P7TW (4-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: TaylorMade MG2 (50.09, 54.11, 60.10)
Shafts: True Temper Dynamic Gold X100 Black (50), KBS Hi-Rev 135X Black (54, 60)

Putter: TaylorMade Spider X Midnite

Ball: TaylorMade TP5

Grips: Gripmaster Roo

Your Reaction?
  • 30
  • LEGIT6
  • WOW3
  • LOL0
  • IDHT1
  • FLOP1
  • OB0
  • SHANK2

Continue Reading

Putter Reviews

WRX Spotlight Review: T Squared TS-713i Standard Series putter

Published

on

Product:  T Squared TS-713i Standard Series Putter

About T Squared: T Squared Putters is a small putter manufacturer just south of Buffalo, New York. The company was founded by Tony Tuber who created his first prototype putters, after hours, in his father’s machine shop. Since then Tony and his father have been creating high-quality putters in the same facility that creates high precision instruments for the medical field. They pride themselves on creating the highest quality, most precise putter they can offer. They offer a few different head shapes from small traditional blades to high MOI mallets and even a custom program to get exactly what you want.

The Ts-713i Standard Series is based on the Ts-713, the first prototype that Tony created. It is a blade-style putter with a slightly longer flange and a unique face insert milled from 6061 aluminum. The body of the Ts713i is milled from a solid block of 303 stainless steel that is produced in the USA and has a Teflon backing between the body and face insert.

This Teflon backing helps give the putter a softer feel at impact and reduce any unwanted vibration. Details are what T Squared is all about and the neck of the putter shows off their milling expertise. The neck is similar to a plumbers neck, built with multiple pieces and offering some cool texture on the section bonded to the head. Another great detail is that all the silver markings on the putter are not filled with paint, they are milled into the head. T Squared finished the head in a sharp matte black and then milled all the markings on the putter for a unique, shiny silver look that really stands out. Ts-713i putters are built for customizing and have a ton of options that you can select if you would like to build something totally unique

On the green, the T Squared TS-713i really performs fantastic. I found the feel at impact very solid without any unwanted vibration. The impact produces a muted click and soft feel that I wasn’t expecting from this aluminum insert and thin face. The deep milling and Teflon coated back to the insert really work together to produce a great, responsive feel that I enjoyed. Deep milling usually makes me a little worried because it can soften the putter too much and lose that feel we all demand.

The TS-713i has no issues and transmits impact feel back to your hands with ease. Mishits are a little louder and harsh, but nothing even close to unpleasant. I have used putters that don’t feel as good on perfectly struck shots as the TS-713i feels on mishit putts. Distance and accuracy on those mishit putts are not as drastic as you would expect with a blade putter. I often just missed the cup by small margins when I struck a putt on the toe or heel of the TS-713i. There aren’t too many blade putters that have shown this level of forgiveness on the green for me.

The “T” alignment aid on the flange of the putter is large and easy to use. Not only do you get a straight line from the face to the back edge for alignment, but the back of the “T” also helps you square the putter up to your target. The Pure grip is not my thing, and it would be great for T Squared to offer a few more options, but that is an easy fix and a very minor criticism.

Overall, the T Squared TS-713i is a great putter from young Tony Tuber that exceeded my expectations. His attention to detail, precision milling, and take on a classic head shape offer golfers something different without sacrificing any performance. If you are looking for a great feeling putter that is made in the USA, you should take a look at T Squared and see what they can make for you.

Your Reaction?
  • 36
  • LEGIT10
  • WOW3
  • LOL1
  • IDHT0
  • FLOP2
  • OB0
  • SHANK1

Continue Reading

19th Hole

Facebook

Trending