Equipment
Edison Forged wedges offer performance for everyone
Terry Koehler is a wedge guy—and today, he officially announces the launch of Edison Forged wedges, the first product from the new Edison Golf Company.
Born from the concept that most wedges on the market don’t benefit the average golfer, Koehler has been on a mission to bring significant technology and innovation to wedges since his initial introduction to the wedge space in the mid-90s. The new Edison forged wedges combine years of experience and design into a club that can offer a tangible improvement in distance control and consistency for every player compared to a traditionally designed tour-style wedge, according to the company.
A shift in design philosophy
Edison Forged wedges look different because they are different. Compared to traditional tour-style wedges that place the majority of mass low in the clubhead, Edison wedges move more mass higher in the head and around the perimeter to increase MOI and consistency on shots hit around the face. Traditional wedges with low center of gravity (CG), cause shots to launch higher and with less spin—that might work for modern drivers, but it’s not something you want in your short game.
Amateur golfers’ largest struggle is consistent face contact. Professional golfers at the highest skill level, on the other hand, can benefit from traditional wedge designs by controlling exactly where the ball makes contact on the face to hit desired trajectories and vary spin. This variability in spin is something that amateur golfers don’t need in their games.
Terry Koehler:
“Tour professionals spend thousands of hours honing their exquisite skills. They have perfected those skills with wedges that really haven’t changed much in decades. I think there are complex reasons why wedges haven’t experienced the same technical revolutions we’ve seen in every other category”
The other difference is the signature TK Sole. The sole has been refined over the years to be as versatile as possible and eliminate the consumer confusion around trying to select just the right grinds for swing and turf conditions. Koehler’s design philosophy is that since turf conditions can vary greatly throughout the season, course to course, and shot to shot, a sole design needs to be able to handle anything you can throw at it. The rear portion of the sole has been given a huge amount of relief to make it lower bounce so it can handle tight lies, firm turf, and shallow swing paths. However, the leading portion of the sole has a high bounce, so that same wedge can handle softer lies and steeper swings.
“Very simply, it takes all that confusion and worry about bounce and throws it right out the window.” – Terry Koehler
Lasting consistency is the final part to this wedge spin equation. Edison Forged are pushing the limits of wedge face and groove design by fly-cutting the face to perfect flatness, then CNC-milling progressive grooves with varying width, depth, spacing, and wall angle. The company then adds a unique “X pattern” etching between the grooves to “push the wedge to USGA limits.”
The proof
Edison Golf doesn’t just want you to take your word for what they are promising with performance. They are offering up the Forged wedges have been proven by independent robotic testing to give you more penetrating trajectories (2-4 degrees lower than ‘tour design’ wedges), dramatically improved spin because of improved gear effect and more distance out of your mishits, particularly those high-face impacts that cost us strokes. The data can be seen below.
Edison Forged wedges: Specs and availability
Edison Forged wedges will come stock in lofts from 45 to 63 degrees in odd numbers only, starting in the spring of 2020, and currently only in right-handed.
Stock shaft offerings are from KBS including the KBS Tour, Tour 105, and Tour Graphite.
Special Offer
Edison is offering specially marked “One of 500” pre-production sets for pre-purchase through the Company’s website at www.EdisonWedges.com. Golfers that purchase one of these limited edition sets will be enrolled in the “Edison 500 Club”, and will receive a suite of special treatment, beginning with a package of Edison logo’d gifts, and includes special Ambassador status where these select Edison wedge owners can earn rewards and incentives for referring their friends to Edison Golf.
- LIKE96
- LEGIT8
- WOW3
- LOL5
- IDHT1
- FLOP5
- OB4
- SHANK22
Whats in the Bag
Chesson Hadley WITB 2024 (March)
- Chesson Hadley what’s in the bag accurate as of the Texas Children’s Houston Open. More photos from the event here.
Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 70 TX
3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 80 TX
Irons: Titleist T200 (3), Titleist 620 CB (4, 5), Titleist 620 MB (6-PW)
Shafts: Graphite Design Tour AD DI 105 X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)
Wedges: Titleist Vokey Design SM10 (52-12F, 56-14F), WedgeWorks (60-K)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: Odyssey White Hot OG 2-Ball
Grip: Odyssey
Grips: Golf Pride Tour Velvet
Ball: Titleist Pro V1x
Check out more in-hand photos Chesson Hadley’s clubs here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Gary Woodland WITB 2024 (March)
Driver: Cobra Darkspeed X (8 degrees)
Shaft: Accra TZ5 70 M5
- The white circle that appears at the top of the face a removable sticker that’s used for launch monitor tracking, and Woodland removes it for competition!
3-wood: Cobra Darkspeed X (14 degrees)
Shaft: Accra TZ5 GW100 Prototype
7-wood: Cobra LTDx LS prototype (20 degrees)
Shaft: Accra TZ5 GW100 Prototype
Irons: Wilson Staff (18 degrees), Cobra King MB (4-PW)
Shafts: KBS Tour C-Taper Limited X
Wedges: Cobra SB (48), Titleist Vokey Design SM10 (52-08F, 56-14F), Cobra King (60)
Shafts: KBS Tour C-Taper Limited X (48 degrees), KBS Tour V-Ten 125
Putter: Scotty Cameron T-5 Proto
Grip: SuperStroke Zenergy Tour 3.0P
Ball: Titleist Pro V1x
Grips: Golf Pride Tour Velvet Cord
See more in-hand photos of Gary Woodland’s WITB in the forums.
- LIKE0
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron
As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)
What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!
View this post on Instagram
I mean, look at this 2-iron from address…
To quote the great author R.L. Stine: “Goosebumps.”
On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.
Here’s what he had to say:
You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?
MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.
And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.
When did it come back in the bag?
MT: December of this past year. So a few months ago.
What year would you say was the first time you threw that in the bag, or, like, when you bought it?
MT: God…Probably, 2016, maybe? 2018?
Do you remember how much you paid for it?
MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.
The driver is interesting, too. What went into the prototyping process?
MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.
It’s just 6.5 degrees, right?
MT: Yeah. Very low loft, yeah.
What kind of ball speed do you have with that these days?
MT: Like high 170’s.
Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.
MT: Yeah. The butter knife.
Very cool thing to have in the bag. Have you done any testing with driving irons?
MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.
How far do you carry that?
MT: Like 235.
A good little wind club, I’m sure.
MTL Yeah, exactly. I can hit it very low. It’s great.
I love it. You have people shook looking at that. Thanks for the time, man.
MT: Absolutely.
To see more photos and discussion of Trainer’s bag, click here.
- LIKE18
- LEGIT4
- WOW1
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole3 days ago
John Daly stuns fans into silence with brutal opening tee shot on PGA Tour Champions
-
19th Hole1 week ago
2-time major champ announces shock retirement from the sport at age of 33
-
19th Hole1 week ago
Edoardo Molinari reveals the latest PGA Tour golfer to turn down ‘good offer’ from LIV Golf
-
19th Hole1 week ago
Scottie Scheffler had an interesting response when asked how he ‘quiets the noise’ following Players victory
-
Equipment2 weeks ago
Best driver 2024: The best driver for you, as recommend by expert club fitters
-
19th Hole1 week ago
Jon Rahm dealt fresh blow to hopes of qualifying for 2025 Ryder Cup
-
19th Hole3 days ago
Charlie Woods finds it tough going on American Junior Golf Association debut
-
19th Hole6 days ago
Why Kevin Streelman sought USGA approval to use this equipment tool as he leads Valspar after round one
Pingback: Edison Golf launches new Edison 2.0 wedges - Fly Pin High
Pingback: Edison Golf launches new Edison 2.0 wedges – GolfWRX
Unitzero
Jul 2, 2020 at 11:36 am
Fat chance they’ll be for “everyone “, lefty’s left out yet again!
myron miller
Dec 6, 2019 at 9:18 pm
Will they be as hard to hit as the SCOR sand wedges are? 52 and 60 are easy to hit in most situations but the 56 is really tough to hit consistantly in heavy sand. Even Scor’s regional rep had lots of trouble with the 56. I could hit it in the rough but never consistently in the sand.
Jed Barish
Dec 6, 2019 at 4:13 pm
I ordered it because I am a believer in his wedges. I love his design with SCOR Golf and been waiting for Terry to come up with a new one 🙂 Hope I’ll be ok with KBS Tour S shaft. Congrats on the comeback!
Kevin
Dec 5, 2019 at 10:58 pm
Excited for these. Thanks Terry
chip75
Dec 5, 2019 at 6:10 pm
Mentions that current wedges are designed for exceptionally skilled tour players, then backs up their wedge is best with robot testing. Is that irony? I think that’s irony.
Maybe show the data capture from average players?
They do look nice.
Terry B Koehler
Dec 5, 2019 at 6:30 pm
Hello Chip, I can see where you might see irony in the robotic testing, but let me explain the process. With the robot, we can precisely replicate contact at five different points on the face, so that we can quantify the variance in smash factor and all other performance aspects. What we set out to do, and achieved, is the most consistent smash factor around the face, so that you get more consistent results from your slight mishits. I hope that clears up the irony?
Thank you.
Terry Koehler
chip75
Dec 5, 2019 at 9:24 pm
Hi Terry. It was something I found amusing, that current wedges were designed for near perfect ball-strikers to your wedges getting tested by a perfect one.
The problem with robot testing is that the results are rarely repeatable (or relatable) to human testing. If we continually hit high toe pitches short due to the the drop-off in efficiency, we’ll eventually start adding speed, we’re constantly making adjustments, robots don’t, they just repeat results. I understand the allure of robot testing (it’s something I find fascinating (the testing itself), as human testing is by its very nature extremely variable.
Anyway, I look forward to seeing reviews, the wedges look great, and I appreciate the post.
Bifule
Dec 5, 2019 at 4:08 pm
If I don’t see these on the USGA conforming club list currently does that mean they have not gone through the approval process to be legal for tournament use?
Terry Koehler
Dec 5, 2019 at 6:32 pm
We will be submitting production articles to the USGA to be measured for the conforming list as we get into regular production. We assure you they will be made to conform to all USGA specifications and be conforming.
C
Dec 5, 2019 at 3:38 pm
Will there be discrete bounce angles between lofts? Or are the clubs bent to a loft within each loft group, thereby changing the bounce angles?
Allen
Dec 5, 2019 at 2:55 pm
Not for everyone…there are no lefty models yet! Maybe next year.
DB
Dec 5, 2019 at 1:57 pm
They look really nice actually. I’m a little confused because the picture shows 58 but the article says odd numbers only. Then the website is selling only the special edition set that is 51-55-59.
Dennis Corley
Dec 5, 2019 at 1:51 pm
No pricing provided. I went to the website and understand why. Are you kidding?
—————–
“One of 500” – Special Edition of EDISON FORGED Wedges
Regular price
$537.00
Shipping calculated at checkout.
—————-
I suppose there is no end to the madness.
Cody
Dec 5, 2019 at 2:43 pm
Looks like it’s for a set of 3 wedges. Pricey, but so are Vokeys.
cody
Dec 5, 2019 at 5:56 pm
I guess he didnt learn his lesson with Hogan…
Oh well these will be gone soon too.
Barrett
Dec 6, 2019 at 1:52 pm
In all fairness, that price is only to get in to their “500 Club”. I’m sure the wedges will cost less than $180 when they are available to the general public.
Randy Siedschlag
Sep 29, 2020 at 9:50 am
Still $179 so I don’t think so sadly. If these we $100-125 range I’d pull the trigger now.
C
Dec 5, 2019 at 1:37 pm
“Edison Forged wedges will come stock in lofts from 45 to 63 degrees in odd numbers only”
…shows picture of 58.
Ben Alberstadt
Dec 5, 2019 at 3:22 pm
The photos are of wedges that were built to even-numbered specs for testing purposes. Same wedges as will be at retail, save for the 1-degree loft differences.