Connect with us

Equipment

Patrick Reed’s irons and playing golf club detective

Published

on

As golf writers with a specialty in golf club technology and an understanding of how the industry and supply chains work, it’s usually not overly difficult for us to draw some conclusions as to where particular clubs might come from. The reason being that as far as top-end quality components go, there are only so many places that have the capability to produce them—especially when it comes to creating thin cast/forged titanium woods or forged irons.

When a new club shows up, this puts us in the position of reading between the lines, closely comparing pictures, club designs, and even fonts, in an attempt to connect the dots.

One of the first examples of this in 2019 was Francesco Molinari’s custom Callaway irons—obviously different from the standard Apex MB model. Francesco even divulged some information about their Japanese roots in an interview with Golf.com’s Jonathan Wall “These [Apex MB] forged blades are made, I think, in Japan, so they’re slightly different from the standard muscle back.” I took a deep dive on these in a piece that can be found here. 

OEM Oversight

Don’t think for a second it’s only equipment junkies on the outside doing research to learn more about their favorite clubs or trying to track down prototype information—OEMs and equipment manufacturers do it too; they even have teams dedicated to the task.

One of the best examples of this is a group of engineers located in Titleist HQ in Fairhaven Massachusetts. Their primary role is to monitor their supply chain, but the other key part of their role is to keep up to date on what other overseas manufacturers are doing with their balls, including the “white label” balls being sold under various brands—a hot topic that has been discussed many times over. The reason this is key for Titleist/Acushnet is they are both designers and patent holders when it comes to golf ball IP (intellectual property), and Acushnet also owns its manufacturing, something only the largest companies can afford to do.

The “Patrick Reed Signature” Irons

Photo By: Royce Thompson (PGA Tour)

This brings us to Patrick Reed’s new “signature” irons, spotted earlier this week at the Hero World Challenge in the Bahamas. Patrick has been quiet on the subject beyond a few details including that he’s been working on them for over a year with a small Japanese company, and we would be hearing more at the beginning of January. First reported by PGA Tour’s Andrew Tursky, thanks to some digging on the USGA Conforming List, the irons are Manufactured by Emery JPN Co.

Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co. online and came back mostly empty-handed until I had an idea. The USGA isn’t the only governing body to have conforming lists so I went to the R&A, and BINGO!

A quick search for Emery resulted in them being the parent company for a number of quality component OEMs including GrindWorks.jp , SAQRA , and Patrick Reed.

Just like with golf balls, phones or computers, smaller companies don’t own their manufacturing and instead rely on creating a design to then be built by a much large facility. With phones, that means Foxconn, with golf balls that means a few large companies in Taiwan and China, and for forged irons, that generally leads to Endo—one of the largest forging companies in the world—they even have they own in house brand, Epon. Considering that GrindWorks irons are known to be forged at Endo, I would be happy to draw a straight line to the Patrick Reed irons also being forged there too.

Until we have further details this is still speculation, but to see what other are saying in the GolfWRX forums check out the discussion here: GolfWRX Forums: Patrick Reed with new Irons

 

 

 

Your Reaction?
  • 184
  • LEGIT31
  • WOW15
  • LOL6
  • IDHT3
  • FLOP8
  • OB6
  • SHANK50

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

25 Comments

25 Comments

  1. Pingback: TOUR REPORT: John Daly’s bizarre irons, Tiger’s surprising equipment changes – GolfWRX

  2. john

    Dec 24, 2019 at 7:36 am

    Like the man himself, they should probably be a lot chunkier.

  3. jgpl001

    Dec 16, 2019 at 4:10 pm

    These look a little cheap and 1970’s to me

    No drooling here..

  4. Randy Copeland

    Dec 12, 2019 at 7:43 pm

    Muira’s made for Nike with Far Par stamped on them for sure no doubt.

  5. lance

    Dec 10, 2019 at 2:13 pm

    Shovel back > muscle back

  6. Tyler Durden

    Dec 9, 2019 at 12:48 pm

    This iron is specially ground in the back to make scooping sand or other impediments easier to sweep away

  7. Caroline

    Dec 7, 2019 at 8:44 pm

    all the big OEM golf companies are in the business to make money and many to satisfy stock holders…it is very simple you make the best equipment you can with the highest margin you can. And when you sit down with that pencil to figure out how to make a good margin finding someone to make your product is always a consideration…

  8. ewfnick

    Dec 7, 2019 at 4:50 am

    Wondered what the fuss was about and just seen what he did, nothing worse than a cheat, if he was playing in any of the groups I play with he would have caught a smack in the gob

  9. Elvis Pwessley

    Dec 7, 2019 at 12:34 am

    Awww….my whittle comment got deweated!

  10. Pricilla Presley

    Dec 7, 2019 at 12:19 am

    Uh oh, can he be the new douche Kooch replacement? I never liked his rolled shoulders and that smug look on his mug or that silly skip step as he pulls his ball out of the cup. Just an all around douche!

  11. Dyson Bochambeau

    Dec 6, 2019 at 8:51 pm

    I hear his clubs give you improved lies

  12. Brandon

    Dec 6, 2019 at 7:36 pm

    Fake news. Patrick Reed forged these himself using nothing but the finest American carbon steel and good old fashioned determination. He just had to move a little sand first in his backyard foundry so he could swing his sledge hammer better.

  13. Clint

    Dec 6, 2019 at 4:43 pm

    These look like they have just enough sole to push some sand away from your ball in the bunker.

    • Rory

      Dec 6, 2019 at 7:08 pm

      No such thing as bad publicity, but I’m betting that’s not the first close up they wanted…..

  14. Hdtvman

    Dec 6, 2019 at 2:49 pm

    Nice work, Lt. Columbia. What I like about Reed, like Tiger, he’s there to win, not chasing the money from major manufacturer’s. I’m sure he could name his price with any of them, but he plays what he likes and what works best for him.

  15. Hoganben

    Dec 6, 2019 at 1:59 pm

    Almost all forged irons look the same so may as well have one or two companies make them and they all look the same because one or two companies make them. Ps….I could design Tiger’s new irons…his irons are always the same with just a different brand name on them!!

  16. Geoffrey Holland

    Dec 6, 2019 at 1:48 pm

    The loost art of proofreading strikes again.

    “the irons are Manufactured by Emory JPN Co.

    Here’s where the detective work kicks in: I went beyond the USGA’s list and starting searching for Emery JPN Co.”

  17. Gary

    Dec 6, 2019 at 11:51 am

    As soon as I saw them I thought Epon. The shape and finishing just looks like what I’m used to seeing from Epon.

    Also if you connect the dots you’ll probably find that Endo forges the blanks that Artisan uses. That’s probably where the connection started.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Chesson Hadley WITB 2024 (March)

Published

on

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 70 TX

3-wood: Titleist TSR2+ (14.5 degrees, A1 SureFit setting)
Shaft: Mitsubishi Diamana D+ 80 TX

Irons: Titleist T200 (3), Titleist 620 CB (4, 5), Titleist 620 MB (6-PW)
Shafts: Graphite Design Tour AD DI 105 X (3), True Temper Dynamic Gold Tour Issue X100 (4-PW)

Wedges: Titleist Vokey Design SM10 (52-12F, 56-14F), WedgeWorks (60-K)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Odyssey White Hot OG 2-Ball
Grip: Odyssey

Grips: Golf Pride Tour Velvet

Ball: Titleist Pro V1x

Check out more in-hand photos Chesson Hadley’s clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Gary Woodland WITB 2024 (March)

Published

on

Driver: Cobra Darkspeed X (8 degrees)
Shaft: Accra TZ5 70 M5

  • The white circle that appears at the top of the face a removable sticker that’s used for launch monitor tracking, and Woodland removes it for competition!

3-wood: Cobra Darkspeed X (14 degrees)
Shaft: Accra TZ5 GW100 Prototype

7-wood: Cobra LTDx LS prototype (20 degrees)
Shaft: Accra TZ5 GW100 Prototype

Irons: Wilson Staff (18 degrees), Cobra King MB (4-PW)
Shafts: KBS Tour C-Taper Limited X

Wedges: Cobra SB (48), Titleist Vokey Design SM10 (52-08F, 56-14F), Cobra King (60)
Shafts: KBS Tour C-Taper Limited X (48 degrees), KBS Tour V-Ten 125

Putter: Scotty Cameron T-5 Proto
Grip: SuperStroke Zenergy Tour 3.0P

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Cord

See more in-hand photos of Gary Woodland’s WITB in the forums.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Q&A: Martin Trainer on his Bobby Grace “Greg Chalmers” putter, 6.5-degree driver, and “butter knife” 2-iron

Published

on

As unbiasedly as I can put it, Martin Trainer has one of the coolest club setups in professional golf. (At some point soon, I’ll put together a top-10 list of “coolest club setups on Tour,” but I know that Trainer will be in the top-10)

What a lineup. He plays a 6.5-degree Wilson prototype driver, a 13-degree Wilson prototype 3-wood, a true blade Wilson Staff Model 2-iron, and a Bobby Grace “Greg Chalmers Commemorative” putter!

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

I mean, look at this 2-iron from address…

To quote the great author R.L. Stine: “Goosebumps.”

On Wednesday at the 2024 Texas Children’s Houston Open, I caught up with Trainer to learn more about his bag setup.

Here’s what he had to say:

You have the Internet going crazy over your bag setup, and your putter. Where’d you pick the Bobby Grace-Greg Chalmers putter up? How long have you had it?

MT: This was from when Bobby Grace came to my course in California: Cal Club. And for whatever reason, they just started having them in the shop. So then I took my buddy’s, started using it, and made, like, a million putts in a row, which is how every putter story begins, I guess.

And then, I bought a couple of my own, used it for years, got to the Tour with it, won on Tour with it (the 2019 Puerto Rico Open). Then, about a year later, started using another putter, did that for a couple years, but now it’s back in the bag.

When did it come back in the bag?

MT: December of this past year. So a few months ago.

What year would you say was the first time you threw that in the bag, or, like, when you bought it?

MT: God…Probably, 2016, maybe? 2018?

Do you remember how much you paid for it?

MT: I don’t know, actually. Maybe $100-150 bucks or something. I think that’s the only golf club I’ve bought between high school and now. Well, two, since I bought two of them.

The driver is interesting, too. What went into the prototyping process?

MT: That was a version of the current driver, but it was the prototype that they first came out with for Tour guys to try. And for whatever reason, I just never switched out to the new one.

It’s just 6.5 degrees, right?

MT: Yeah. Very low loft, yeah.

What kind of ball speed do you have with that these days?

MT: Like high 170’s.

Yeah, that’ll work. And then a 2-iron blade? We’re seeing fewer and fewer of those out here.

MT: Yeah. The butter knife.

Very cool thing to have in the bag. Have you done any testing with driving irons? 

MT: Yeah, I used to have a thicker one, but it was a little offset, and I never hit it that well. And then finally, I started messing around with the butter knife. And I remember the first time I looked down at it, I was terrified. And then I ended up getting used to it, putting it in play, and it’s been in place since. It’s a pretty good club for me.

How far do you carry that? 

MT: Like 235.

A good little wind club, I’m sure.

MTL Yeah, exactly. I can hit it very low. It’s great.

I love it. You have people shook looking at that. Thanks for the time, man. 

MT: Absolutely.

To see more photos and discussion of Trainer’s bag, click here.

Your Reaction?
  • 15
  • LEGIT3
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending