Connect with us

Equipment

Forum Thread of the Day: “Going back in time equipment-wise?”

Published

on

Today’s Forum Thread of the Day comes from Jaygolf37 who asked WRXers on their thoughts on going back in time equipment-wise. Jaygolf37 has recently found success after putting his Ping i5 irons back in his bag, and our members share their thoughts and experiences of siding with older equipment.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Aviador Naval: “I put a ~2005-2006 original Cleveland Ti Launcher fairway back in the bag for the umpteenth time. Smaller footprint by today’s standards. Only 15 deg club I’ve been able to hit reliably from turf. Currently playing a Mn-Bn Anser I bought in 1989. Like the lighter head weight. Just got some MP20 mid and short irons which are basically a redo of the TN-87s. Changes driven by a mix of functionality (fw), variety (putter), and irrational ho’ing (irons).”
  • cgasucks: “All my gamers are old with my newest clubs made in the early 2010s. I feel that with a good swing fundamental, one can play with any club out there. I think older clubs are better feeling, obviously a lot cheaper, and can still keep up with the present-day clubs out there since golf tech has been stagnant for years.”
  • scotty_2987: “Just put my 910 D2 back in play yesterday and had the best driving day I’ve had in a long time, and I was hitting it just as far as all the newer drivers.”
  • MountainGoat: “Whenever I lose my swing, I go back to a set of Maltby CER701Us that I assembled in 2006. Those are the clubs I was using when I discovered my current swing technique, so those are the ones I inevitably return to when I need to re-discover it.”

Entire Thread: “Going back in time equipment-wise?”

Your Reaction?
  • 13
  • LEGIT2
  • WOW0
  • LOL2
  • IDHT1
  • FLOP2
  • OB1
  • SHANK5

Gianni is the Managing Editor at GolfWRX. He can be contacted at [email protected].

2 Comments

2 Comments

  1. Rich Douglas

    Nov 28, 2019 at 12:40 pm

    Sorry, but if any of my old stuff was better than today’s gear, I’d still be using it.

    Better to think about WHY some of that old gear worked and see if you’re still leveraging those characteristics in your current clubs.

    For example, I really had a good time when I switched to a Callaway Steelhead driver with a 43.5″ shaft. I’m thinking about going to a similar length the next time I get fit for a driver, although it will be with a modern head and shaft.

  2. Gray

    Nov 27, 2019 at 11:48 am

    I play ~2007 Cleveland CG-7 Tour Irons. I work at a course where we have demo days multiple times per year. I’ve never found a set of irons with that combination of forgiveness, butter feeling, thin topline, and excellent sound. The closest thing I’ve been able to find were the Apex MBs, but they’re nowhere near as forgiving.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 83
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending