Connect with us

Equipment

BGT launches all-new Stability Tour putter shaft

Published

on

Breakthrough Golf Technology (BGT) hit a home run with the introduction of the original Stability Putter shaft. Now, to build on that success it is introducing the Stability Tour which offers the same massive boost in putter performance, with improved feel and looks.

Stability Shaft Technology Recap

The principle behind the BGT Stability Shaft is that by increasing the stiffness and reducing the torque of the putter shaft you reduce club head twisting and greatly increase putts made percentage, especially on mishits. Of course, using a higher MOI putter design helps with that, but there is still an inherent flaw—what happens when you’re using 2019 putter technology with 1950s steel shaft technology? Less than ideal results.

We featured the original BGT Stability on GolfWRX earlier this year when I had the chance to do a fitting with VP of R&D Blair Philip (BGT’s Stability putter shaft: Real numbers, real improvement). As someone with experience using the Quintic Putting fitting system and the information it produces, I was extremely impressed with the performance benefits the Stability Shaft offered me.

So where does the new Stability Tour improve vs the original Stability? By taking player feedback from the original and tweaking the design to offer the same technological advantage and putting it into a more player-preferred package.

The Tour Difference

As much as the original is loved by those who put it into play, the biggest deterrent that kept golfers from making the switch was the looks—and BGT took on the challenge to improve it!

BGT Tour Shaft

The original Stability had a consistent diameter of .600″ all the way from the shaft transition adapter to the butt end. .600″ is the standard butt diameter for must shafts on the market including irons and driver shafts, but having the .600″ run the entire length makes the shaft appear oversized compared to standard putter shafts and creates a very noticeable transition from the graphite portion to the steel at the bottom.

The new Stability Tour has a slow consistent outside diameter taper from .600″ at the butt to just over .520″ at the tip, .080″ might not seem like a big difference, until you understand just how sensitive the human eye is to detecting measurements and recognizing parallel lines. This small change makes a huge difference to how the shaft appears at address.

With this change in the specs of the outside diameter, a lot of other things had to change on the inside too. The construction of the Original shaft and its four parts can be seen below:

The new Stability Tour uses 30 percent more graphite to reinforce the shaft and no longer uses the aluminum insert to create the extra rigidity. When talking with Blair Philip about the construction of the Stability Tour, the new shaft is actually stiffer and stronger than the previous versions but offers better feel, and here’s how

Graphite wall thickness: By increasing the wall thickness of the Tour, it reduces the acoustic vibration potential and makes it sound and feel softer. Think if a crash symbol vs a solid block of steel—it’s an extreme example but the symbol is going to be a lot louder when hit with the same force because it’s thinner and has the potential of vibrate more. You add in the inherent vibration dampening properties of the material (graphite) itself, and you have a shaft that sounds softer, feels better, and keeps the ball online more often.

Balance point: The other element for feel is the balance point of the shaft. The new Stability offers a balance point much more inline with a traditional steel shaft vs. the original Stability. This means that for players used to a specific weight feel (swing weight) of their putter before re-shafting, this can eliminate one variable for the converting player.

Per BGT: “It will balance like a steel shaft which makes it easy to recreate a specific swing weight when re-shafting. Better golfers can replace their steel shaft without changing the balance of the putter, which allows the most discerning players to achieve precise specifications on their equipment.”

When all of these changes are combined together into the new Stability Tour putter shaft, you get the same benefits of the original in a smaller, sleeker, player-preferred package.

For more information check out BGT’s Website:  BreakThroughGolfTech.com,  and you can see what our members are saying in the GolfWRX Member testing thread here: BGT Stability Tour, GolfWRX Member Testing Thread

 

Your Reaction?
  • 55
  • LEGIT4
  • WOW3
  • LOL3
  • IDHT1
  • FLOP4
  • OB0
  • SHANK16

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

3 Comments

3 Comments

  1. Martin Barrier

    Nov 25, 2019 at 4:07 pm

    Success, I am not sold on that and am in the golf business

  2. Jamey

    Nov 23, 2019 at 8:33 pm

    Matt K sucks

  3. JP

    Nov 23, 2019 at 6:50 pm

    A home run? I’ve only noticed ONE on tv. And the only one I’ve seen in person is on the used putter rack in a Ping B60 style head at Golf Galaxy right now. I rolled it and the whole putter just wasn’t for me and didn’t suit my eye, wrong length, wrong grip, etc… Maybe it is good, I’ll never know. But I don’t see how it was a “home run”…

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 65
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending