Equipment
Bettinardi unveils 2020 BB Series and Inovai Series putters
Bettinardi Golf has unveiled its 2020 lineup, which includes a refreshed BB Series and completely re-engineered Inovai Series.
The BB Series features the brand’s classic head shapes, improved visual details as well as contours, and an all-new Glacier Black finish and paint scheme for a more glare-resistant appearance.
The company describes the Inovai series as its most advanced MOI mallets to date. The putters are milled in a one-piece 303 stainless steel face with a 6061 aluminum rear piece. The new additions also contain a Cobalt Blue anodized finish with the 303 stainless face in a platinum finish, which aims to offer golfers optimal visual cues while framing the ball at address.
2020 Bettinardi BB Series
Along with the features mentioned above, each putter from the 2020 BB Series is 100 percent milled from one block of soft carbon steel. The four new additions contain a super-fly mill face milling formed by what the company describes as a “less aggressive tool” for ultimate smoothness and response to provide players with maximum feel at impact.
Each addition comes paired with a tour-grade putter shaft with added stability and stiffer structure to promote a constant weight throughout the player’s swing arc, as well as Lamkin’s new SinkFit putter grip.
The BB1 is offered in both right and left-handed options, while all four of the new BB Series putters are weighted at 350 grams with a lie of 70 degrees and three degrees of loft.
BB1
The classic BB1 features a plumber’s neck, designed to offer more of a traditional appearance and moderate toe hang, with tighter radiuses along the topline, shoulders, and bumpers.
BB1 Flow
Back in the lineup for the first time since 2016, the BB1 Flow features a flat topline, softened for a tour-preferred look at address with refined shoulders and bumpers designed for a more contoured appearance. The flow neck position sits at 3/4 shaft offset, which aims to offer players with more arc in their stroke optimal visual cues at setup.
BB8 Wide
Designed for those seeking a traditional blade appearance, Bettinardi milled a wider flange on his classic BB8 head shape aiming to provide a clean looking, squared-off blade with lengthened sightline, compressed shoulders, and flat bumpers.
BB45
The BB45 is a mallet-shaped putter, which features an extended flange line, tightly milled radiuses along the shoulders and outer flange, and a slightly thinner top-line designed to provide a player’s preference at address. The putter contains a single bend shaft gently flowing into the spud neck.
2020 Bettinardi Inovai Series
As well as containing an American 303 stainless steel face and 6061 aluminum rear piece designed for optimal weight distribution to provide greater stability and added forgiveness, the new additions from Bettinardi feature the company’s F.I.T. Face milling, which looks to offer maximum response to golfers at impact.
The series arrives with a tour-grade stiffer putter shaft and Lamkin’s new SinkFit putter grip, and all three new additions are weighted at 358 grams, with a lie of 70-degrees and 2-degrees of loft. The Inovai 6.0 arrives in both right and left-handed options.
Inovai 6.0
According to Bettinardi, the Inovai 6.0 is the “best feeling MOI putter” created to date, offering optimal weight distribution for greater stability and added forgiveness due to the addition of an American 303 Stainless Steel Face, along with a 6061 Aluminum rear piece. TheInovai 6.0 flatstick features a crescent milled neck.
Inovai 6.0 CTR
This center-shaft MOI mallet is designed for players with a straight-back-straight-through putting stroke in mind and contains a one-piece 303 stainless steel face without offset, to provide maximum visuals from the straight shaft appearance.
Inovai 6.0 S
The Inovai 6.0 S features a single bend shaft flowing into the putter head and is targeted at players who prefer minimal toe hang.
Each addition from the 2020 BB Series retails at $300, while each putter from the Inovai Series costs $400. You can pre-order from November 14th on the company website, with domestic shipping starting on January 14th, 2020. See the rest of the line, including the 2020 Studio Stock and Queen B putters at Bettinardi.com.
- More photos of the 2020 Bettinardi BB Series here.
- More photos of 2020 Bettinardi Inovai putters here.
- LIKE87
- LEGIT7
- WOW7
- LOL3
- IDHT1
- FLOP4
- OB3
- SHANK22
Whats in the Bag
Rasmus Højgaard WITB 2024 (April)
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Whats in the Bag
Rory McIlroy WITB 2024 (April)
- Rory McIlroy what’s in the bag accurate as of the Zurich Classic.
Driver: TaylorMade Qi10 (9 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 8 X
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Fujikura Ventus Black 9 X
Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9)
Shaft: Project X 7.0 (4-9)
Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB), Titleist Vokey Design WedgeWorks (58-K @59)
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Putter: TaylorMade Spider Tour X3
Grip: SuperStroke Zenergy Pistol Tour
Ball: 2024 TaylorMade TP5x
Grips: Golf Pride MCC
Check out more in-hand photos of Rory McIlroy’s WITB in the forums.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Equipment
Spotted: Nate Lashley’s Ping PLD “Wolverine” putter
Ping PLD putters have been a very common site on profesional tours. Pros seem to gravitate toward the PLD line’s custom options and precision milling. We have seen the PLD line expanded over the years, but we haven’t seen too many, if any, large mallets.
This week we spotted a PLD putter in Nate Lashley’s bag that has a similar look to the old Ping Wolverine head shape. This putter is a large mallet with the famous “claws” on the outside and oval center that housed the alignment aid.
Nick’s putter has the PLD logo on the back but also looks like it might have an insert installed on the face. It is hard to tell but at the address picture, it looks like the face is a lighter material than the rest of the putters. The putter is center-shafted and should be face-balanced with a high MOI for stability and forgiveness on mishits. The sole is completely milled and has no markings of name or technologies that might be present in the head. A single white site line is on the top of the putter for alignment.
Nick’s putter is finished off with a chrome steel shaft and a Super Stroke Zenergy Flatso 2.0 grip in black and white.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE4
- LEGIT2
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB2
- SHANK2
-
19th Hole2 weeks ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 days ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 days ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole3 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week ago
Report: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
Tim
Nov 17, 2019 at 6:26 am
Can’t see them selling outside the US with ’Murica written all over it
AJ
Nov 17, 2019 at 3:33 pm
American made = quality in many markets around the world, and these are very nice
HDTVMAN
Nov 16, 2019 at 4:13 pm
I like a heavier feel and play both the Queen Bee #6 on fast greens, and the BB56 on slower greens. Balance, feel, weighting, roll, direction…Excellent! I’ve had similar putters from the two other big names ($400+) in milled putters, but my misses were not nearly as close as with the Bettinardi’s. My goal is to make a high percentage of 10′ & closer putts, and I have been more successful with the Bettinardi models. I see pricing comments…you spend $400-$600+ on a driver that you may hit 10-12 times/round, but you putt 36+ times/round! Get what works best for you, and get fit. It’s definitely worth it. Remember, Drive for show, Putt for $$$.
John
Nov 16, 2019 at 3:40 pm
$300-$400 for a putter. I bought a clearance Ping Scottsdale Anser 2 B for $90 and putt as well if not better than all the higher end putters I’ve tried.
joe
Nov 14, 2019 at 7:14 pm
Bettinardi does the worst job at paint fill.
Ardbeggar
Nov 14, 2019 at 1:16 pm
Good that they got rid of the bright green lettering from last year’s BB series.
Lefty
Nov 14, 2019 at 12:36 pm
So they went the Scotty route and combined materials to cut costs. In all honestly, please correct me if Im wrong, what is the difference between the 6.0 and the 3.0 line? Besides the shaft options, it looks completely the same with the half aluminum design.
The proto 6.0s that are one piece SS or full carbon run for $1200+ I guess that’s the real difference.
Not a knock on them, I believe they make quality products but I just want the facts. Was hoping for a BB0 this time around *sigh*
Bill
Nov 14, 2019 at 3:33 pm
It’s probably more to cut weight. SS is too heavy to do in that size head.
Big difference between 6.0 and 3.0 that I see is that the face piece is SS and the back is Al. 3.0 it was flipped.
bobby
Nov 14, 2019 at 12:04 pm
The light blue looks like a woman’s putter. Head shapes the same as before and everyone else. Zero innovation. Stick with what you got already.
Dan
Nov 16, 2019 at 4:42 am
Explain what about the putter makes it ‘a woman’s’ ?
DB
Nov 14, 2019 at 10:29 am
This lineup looks great. Any more info on the grip? The shape doesn’t look like any of the SinkFit grips on the Lamkin website.
Will
Nov 14, 2019 at 10:19 am
Winner for RJB and Co. in Chicago! Nice shapes, traditional in the BB, and have been waiting for new Inovai for a while, excited to try one-piece milled stainless face.