Equipment
Bettinardi unveils 2020 BB Series and Inovai Series putters
Bettinardi Golf has unveiled its 2020 lineup, which includes a refreshed BB Series and completely re-engineered Inovai Series.
The BB Series features the brand’s classic head shapes, improved visual details as well as contours, and an all-new Glacier Black finish and paint scheme for a more glare-resistant appearance.
The company describes the Inovai series as its most advanced MOI mallets to date. The putters are milled in a one-piece 303 stainless steel face with a 6061 aluminum rear piece. The new additions also contain a Cobalt Blue anodized finish with the 303 stainless face in a platinum finish, which aims to offer golfers optimal visual cues while framing the ball at address.
2020 Bettinardi BB Series
Along with the features mentioned above, each putter from the 2020 BB Series is 100 percent milled from one block of soft carbon steel. The four new additions contain a super-fly mill face milling formed by what the company describes as a “less aggressive tool” for ultimate smoothness and response to provide players with maximum feel at impact.
Each addition comes paired with a tour-grade putter shaft with added stability and stiffer structure to promote a constant weight throughout the player’s swing arc, as well as Lamkin’s new SinkFit putter grip.
The BB1 is offered in both right and left-handed options, while all four of the new BB Series putters are weighted at 350 grams with a lie of 70 degrees and three degrees of loft.
BB1
The classic BB1 features a plumber’s neck, designed to offer more of a traditional appearance and moderate toe hang, with tighter radiuses along the topline, shoulders, and bumpers.
BB1 Flow
Back in the lineup for the first time since 2016, the BB1 Flow features a flat topline, softened for a tour-preferred look at address with refined shoulders and bumpers designed for a more contoured appearance. The flow neck position sits at 3/4 shaft offset, which aims to offer players with more arc in their stroke optimal visual cues at setup.
BB8 Wide
Designed for those seeking a traditional blade appearance, Bettinardi milled a wider flange on his classic BB8 head shape aiming to provide a clean looking, squared-off blade with lengthened sightline, compressed shoulders, and flat bumpers.
BB45
The BB45 is a mallet-shaped putter, which features an extended flange line, tightly milled radiuses along the shoulders and outer flange, and a slightly thinner top-line designed to provide a player’s preference at address. The putter contains a single bend shaft gently flowing into the spud neck.
2020 Bettinardi Inovai Series
As well as containing an American 303 stainless steel face and 6061 aluminum rear piece designed for optimal weight distribution to provide greater stability and added forgiveness, the new additions from Bettinardi feature the company’s F.I.T. Face milling, which looks to offer maximum response to golfers at impact.
The series arrives with a tour-grade stiffer putter shaft and Lamkin’s new SinkFit putter grip, and all three new additions are weighted at 358 grams, with a lie of 70-degrees and 2-degrees of loft. The Inovai 6.0 arrives in both right and left-handed options.
Inovai 6.0
According to Bettinardi, the Inovai 6.0 is the “best feeling MOI putter” created to date, offering optimal weight distribution for greater stability and added forgiveness due to the addition of an American 303 Stainless Steel Face, along with a 6061 Aluminum rear piece. TheInovai 6.0 flatstick features a crescent milled neck.
Inovai 6.0 CTR
This center-shaft MOI mallet is designed for players with a straight-back-straight-through putting stroke in mind and contains a one-piece 303 stainless steel face without offset, to provide maximum visuals from the straight shaft appearance.
Inovai 6.0 S
The Inovai 6.0 S features a single bend shaft flowing into the putter head and is targeted at players who prefer minimal toe hang.
Each addition from the 2020 BB Series retails at $300, while each putter from the Inovai Series costs $400. You can pre-order from November 14th on the company website, with domestic shipping starting on January 14th, 2020. See the rest of the line, including the 2020 Studio Stock and Queen B putters at Bettinardi.com.
- More photos of the 2020 Bettinardi BB Series here.
- More photos of 2020 Bettinardi Inovai putters here.
- LIKE87
- LEGIT7
- WOW7
- LOL3
- IDHT1
- FLOP4
- OB3
- SHANK22
Whats in the Bag
Matthieu Pavon WITB 2024 (May)
- Pavon’s WITB accurate as of the Wells Fargo Championship. More photos from the event here.
Driver: Ping G430 Max (9 degrees)
Shaft: Fujikura Ventus TR Black 6 X
3-wood: Ping G430 LST (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X
Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black 10 X
Irons: Ping i230 (3-PW)
Shafts: Nippon Modus3 Tour 120 X
Wedges: Ping Si59 (52-12S, 58-8B)
Shafts: Nippon Modus3 Tour 120 X
Putter: Ping Cadence TR Tomcat C
Grip: SuperStroke Claw 1.0P
Grips: Golf Pride MCC Align
Ball: Titleist Pro V1
Check out more in-hand photos of Pavon’s gear here.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Spotted: Tommy Fleetwood’s TaylorMade Spider Tour X Prototype putter
Tommy Fleetwood has been attached to his Odyssey White Hot Pro #3 putter for years now. However, this week at the Wells Fargo Championship, we did spot him testing a new putter that is very different, yet somewhat similar, to his current gamer.
This new putter is a TaylorMade Spider Tour X head but with a brand new neck we haven’t seen on a Spider before. A flow neck is attached to the Spider head and gives the putter about a 1/2 shaft offset. This style neck will usually increase the toe hang of the putter and we can guess it gets the putter close to his White Hot Pro #3.
Another interesting design is that lack of TaylorMade’s True Path alignment on the top of the putter. Instead of the large white center stripe, Tommy’s Spider just has a very short white site line milled into it. As with his Odyssey, Tommy seems to be a fan of soft inserts and this Spider prototype looks to have the TPU Pure Roll insert with 45° grooves for immediate topspin and less hopping and skidding.
The sole is interesting as well in that the rear weights don’t look to be interchangeable and are recessed deep into the ports. This setup could be used to push the CG forward in the putter for a more blade-like feel during the stroke, like TaylorMade did with the Spider X Proto Scottie Scheffler tested out.
Tommy’s putter is finished off with an older Super Stroke Mid Slim 2.0 grip in blue and white. The Mid Slim was designed to fit in between the Ultra Slim 1.0 and the Slim 3.0 that was a popular grip on tour.
- Check out the rest of our photos from the 2024 Wells Fargo Championship
- LIKE10
- LEGIT2
- WOW2
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK0
Equipment
Club Junkie WITB, league night week 4: Some old, some new
We enter week 4 of Thursday night men’s league feeling a little more confident in the game. BK is hoping to go a little lower and reduce the mistakes out there with these clubs in the bag. Watch the video for the full breakdown of why these clubs are getting the starting nod this week!
Driver: Titleist TSR2 (10 degrees, neutral setting)
Shaft: Mitsubishi Diamana WB 63 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: UST Mamiya Lin-Q M40X TSPX Blue 7F5
7-wood: Ping G430 Max (-1 degree, flat Ssetting)
Shaft: Fujikura Ventus TR Blue 8 S
Iron: Mizuno Pro Fli-Hi 4
Shaft: Aerotech Steelfiber hls880 S
Irons: PXG 0317 Tour (5-PW)
Shaft: LA Golf A-Series 105 Low (4)
Wedge: Titleist Vokey SM10 (50-08F)
Shaft: UST Mamiya Dart V 105 F4 Wedge
Wedge: Ping S159 (56-10H)
Shaft: Ping Z-Z115
Wedge: Ping S159 (60-08B)
Shaft: Ping Z-Z115
Putter: PXG Battle Ready II Brandon
Shaft: BGT Stability Tour Spec One
Ball: Callaway Chrome Tour X
- LIKE2
- LEGIT2
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK2
-
19th Hole3 weeks ago
Justin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
-
19th Hole2 weeks ago
‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole2 weeks ago
LET pro gives detailed financial breakdown of first week on tour…and the net result may shock you
-
19th Hole2 days ago
Report: LIV star turns down PGA Championship invite due to ‘personal commitments’
-
19th Hole1 week ago
Gary Player claims this is what ‘completely ruined’ Tiger Woods’ career
-
19th Hole3 weeks ago
TaylorMade signs 15-year-old AJGA Rolex Junior Player of the Year to an NIL contract
-
Whats in the Bag2 weeks ago
Team McIlowry (Rory McIlroy, Shane Lowry) winning WITBs: 2024 Zurich Classic
-
Equipment1 week ago
Golf fans left surprised by LIV’s choice of course for its 2024 individual championship event
Tim
Nov 17, 2019 at 6:26 am
Can’t see them selling outside the US with ’Murica written all over it
AJ
Nov 17, 2019 at 3:33 pm
American made = quality in many markets around the world, and these are very nice
HDTVMAN
Nov 16, 2019 at 4:13 pm
I like a heavier feel and play both the Queen Bee #6 on fast greens, and the BB56 on slower greens. Balance, feel, weighting, roll, direction…Excellent! I’ve had similar putters from the two other big names ($400+) in milled putters, but my misses were not nearly as close as with the Bettinardi’s. My goal is to make a high percentage of 10′ & closer putts, and I have been more successful with the Bettinardi models. I see pricing comments…you spend $400-$600+ on a driver that you may hit 10-12 times/round, but you putt 36+ times/round! Get what works best for you, and get fit. It’s definitely worth it. Remember, Drive for show, Putt for $$$.
John
Nov 16, 2019 at 3:40 pm
$300-$400 for a putter. I bought a clearance Ping Scottsdale Anser 2 B for $90 and putt as well if not better than all the higher end putters I’ve tried.
joe
Nov 14, 2019 at 7:14 pm
Bettinardi does the worst job at paint fill.
Ardbeggar
Nov 14, 2019 at 1:16 pm
Good that they got rid of the bright green lettering from last year’s BB series.
Lefty
Nov 14, 2019 at 12:36 pm
So they went the Scotty route and combined materials to cut costs. In all honestly, please correct me if Im wrong, what is the difference between the 6.0 and the 3.0 line? Besides the shaft options, it looks completely the same with the half aluminum design.
The proto 6.0s that are one piece SS or full carbon run for $1200+ I guess that’s the real difference.
Not a knock on them, I believe they make quality products but I just want the facts. Was hoping for a BB0 this time around *sigh*
Bill
Nov 14, 2019 at 3:33 pm
It’s probably more to cut weight. SS is too heavy to do in that size head.
Big difference between 6.0 and 3.0 that I see is that the face piece is SS and the back is Al. 3.0 it was flipped.
bobby
Nov 14, 2019 at 12:04 pm
The light blue looks like a woman’s putter. Head shapes the same as before and everyone else. Zero innovation. Stick with what you got already.
Dan
Nov 16, 2019 at 4:42 am
Explain what about the putter makes it ‘a woman’s’ ?
DB
Nov 14, 2019 at 10:29 am
This lineup looks great. Any more info on the grip? The shape doesn’t look like any of the SinkFit grips on the Lamkin website.
Will
Nov 14, 2019 at 10:19 am
Winner for RJB and Co. in Chicago! Nice shapes, traditional in the BB, and have been waiting for new Inovai for a while, excited to try one-piece milled stainless face.