Connect with us

Equipment

Inside info on Jason Dufner’s custom LA Golf Shafts long iron shaft

Published

on

This week, on the range at the Military Tribute at The Greenbrier, the inaugural event of the 2019 – 2020 PGA Tour season, we spotted Jason Dufner with a very custom LA Golf Shafts long iron shaft.

We reached out to LA Golf Shafts Chief Product Officer John Oldenburg to get the inside info, and John did not disappoint in the details and the story behind the switch by Jason.

“Duff reached out to me shortly after he put our new OLYSS 65 Tour X prototype in play in his driver last season.  He was looking for something for his 4-iron that would get the ball up in the air a bit easier, but maintain (or increase) distance, and keep the spin close to where it was with his existing shaft which was a TT Dynamic Gold AMT S400.  What I worked on providing him was a shaft that had an overall stiffness/frequency and weight that were comparable to his current set up, but with a softer tip section.  And to improve accuracy (decrease dispersion), I wanted to get him something with lower torque than the TT AMT shaft.  So, in a nutshell, that’s what I designed for him.  It’s a 125 gram shaft with a frequency close to the AMT S400, but with a tip that is pretty significantly softer and has 0.3 degrees lower torque.  The combo of a softer tip with lower torque will help him to launch the ball higher but maintain his accuracy.  The “Duff 4-iron”, also has a higher balance point than the AMT S440.  That way Duff can use a heavier head, get the same swingweight he is comfortable with, and put a little more mass behind the ball at impact to get an increase in ball speed and thus distance.”

“That’s the great thing about graphite.  The limitless design capability.  Graphite is a huge family of composite materials, with different stiffness, strength, density, etc..   Steel, although there are more alloys available today, is primarily a single material with a defined, limited set of mechanical properties.  And even with the additional alloys, individual steel shafts are made from one single steel alloy.  I can mix and match any number of composite materials into a single shaft, to change, enhance, fine tune any number of the shaft playing characteristics.  I can lower the torque and soften the tip.  With steel, if you soften the tip, the torque has to go up.  With steel, change the weight and you change the stiffness and torque.  Composites allow me to adjust individual attributes while having little or no effect on the remaining attributes.  This is a huge benefit of graphite and one of the reasons that I am working with Bryson and Duff and complete sets of graphite for their irons.  Stay tuned!”

This hopefully answers some of the questions that have been asked in the forums about a potential full iron set, and thanks to John we can look forward to more individual player-focused products.

Your Reaction?
  • 83
  • LEGIT10
  • WOW4
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

3 Comments

3 Comments

  1. David johnson

    Sep 13, 2019 at 4:36 pm

    Great article i am an old golf pro who learnt his golf as a club maker and player the comments make perfect sense and I would love to contact this company for some own use driver and fairway shafts to give me back some length I have lost if you give me the contact details I would be most grateful

  2. dixiedoc

    Sep 12, 2019 at 10:11 am

    Duff’s going to need more that a new four iron

  3. JP

    Sep 11, 2019 at 3:41 pm

    Too bad this isn’t available to the average consumer.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Kris Kim WITB 2024 (May)

Published

on

Driver: TaylorMade Qi10 (9 degrees @7)
Shaft: Mitsubishi Tensei 1K White 60 TX

3-wood: TaylorMade Qi10 Tour (15 degrees @13.5)
Shaft: Mitsubishi Diamana WB 73 TX

Irons: TaylorMade P770 (2, 4), TaylorMade P7MB (5-PW)
Shafts: Mitsubishi Tensei 1K White 80 TX (2), Nippon N.S. Pro Modus3 Tour 120 X

Wedges: TaylorMade MG4 (50-09SB, 56-12SB, 60-11TW)
Shafts: Nippon N.S. Pro Modus3 WV 125

Putter: TaylorMade Spider Tour

Grips: Golf Pride Tour Velvet Cord

Check out more in-hand photos of Kris Kim’s equipment here.

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Welcome to the family: TaylorMade launches PUDI and PDHY utility irons

Published

on

TaylorMade is continuing its UDI/DHY series with the successor to the Stealth UDI and DHY utility irons: PUDI and PDHY (which the company styles as P·UDI and P·DHY). TaylorMade is folding the designs in with its P Series of irons.

TaylorMade outlined the process of developing its new utilities this way. The company started with the data on utility iron usage. Not surprisingly, better players — i.e. those who generate more clubhead speed and strike the ball more precisely — were found to gravitate toward the UDI model. DHY usage, however, covered a wider swath than the company might have expected with six-to-18 handicappers found to be bagging the club.

TaylorMade also found that the majority of golfers playing UDI or DHY utilities were playing P Series irons at the top of their iron configurations.

Can you see where this is going?

Matt Bovee, Director of Product Creation, Iron and Wedge at TaylorMade: “As we look to the future, beyond the tech and the design language, we are excited about repositioning our utility irons into the P·Series family. P·UDI is an easy pair for players that currently play P·Series product and P·DHY is an extremely forgiving option for players of all skill levels. It is a natural fit to give these players the performance in this category that they are looking for.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

TaylorMade PUDI

TaylorMade PUDI technology cutaway (via TaylorMade)

Crafted with tour player input, TaylorMade sought to develop a confidence-inspiring utility iron that blends with the rest of the P Series irons. Also of note: Interestingly, the PUDI has a more compact head than the P790.

In comparison to past UDI products, the PUDI has a more traditional iron shape, slimmer toplines, and less offset with a little of the backbar visible at address.

TaylorMade PDHY

TaylorMade PDHY tech cutaway (via TaylorMade).

Larger in profile than the PUDI, the PDHY seeks to position center of gravity (CG) lower in the club for ease of launch. The toe height is larger and the profile is larger at address — roughly five millimeters longer than PUDI — the sole of the club is wider for improved forgiveness.

Club Junkie’s take

Golfers who feel like they are missing something at the top of the bag could find the PUDI or PDHY a great option. The look of the PUDI should fit the most discerning eye with a more compact look, less offset, and a thinner topline. If you want a little more confidence looking down the P-DHY will be slightly larger while still being a good-looking utility iron.

For being small packages both models pack a pretty good punch with fast ball speeds, even off-center. The feel is soft and you get a solid feel of the ball compressing off the face when you strike it well. Your ears are greeted with a nice heavy thud as the ball and club come together. The PDHY will launch a little higher for players who need it while the PUDI offers a more penetrating ball flight. Both utility irons could be the cure for an open spot in the top end of the bag.

PUDI, PDHY, or Rescue?

TaylorMade offers the following notes to assist golfers in filling out their bags:

  • PUDI has mid-CG right behind the center face to create a more penetrating mid-to-low ball flight
  • PDHY has a lower center of gravity to produce an easier-to-launch mid-to-high ball flight.
  • Both PUDI and PDHY are lower-flying than the company’s hybrid/Rescue clubs.
  • PUDI is more forgiving than P790.
  • PDHY is the most forgiving iron in the entire TaylorMade iron family

Pricing, specs, and availability

Price: $249.99

At retail: Now

Stock shafts: UST Mamiya’s Recoil DART (105 X, 90 S and 75 R – only in PDHY)

Stock grip: Golf Pride’s ZGrip (black/grey)

PUDI lofts: 2-17°, 3-20°, 4-22° in both left and right-handed

PDHY lofts: 2-18°, 3-20° and 4-22° in both left and right-handed

Your Reaction?
  • 11
  • LEGIT3
  • WOW1
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (5/3/24): Scotty Cameron Champions Choice 2.5+ putter

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Scotty Cameron Champions Choice 2.5+ putter

From the seller: (@wwcl): “Has been gamed as pics show. 33.5 includes original h/c and grip. $575 includes shipping and PP fees.”

To check out the full listing in our BST forum, head through the link: Scotty Cameron Champions Choice 2.5+ putter

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending