Connect with us

Equipment

New for 2020, Callaway Jaws MD5 wedges boast more bite

Published

on

Say hello to the new 2020 Callaway Jaws MD5 wedges from Callaway Golf. Redesigned from the ground up to create ultimate performance on all shots, the new Jaws wedges are being marketed as the most aggressive grooves in golf.

It’s been almost 10 years since we’ve seen the Jaws name used as part of the Callaway wedge lineup, but with the introduction of the new MD5 (Mack Daddy 5) Jaws wedges and their completely rethought-out groove design, Callaway felt that if there was a time to bring it back, it’s now!

2020 Callaway Jaws MD5 wedge 1

Callaway Jaws MD5 wedges: The story

The Rules of Golf have limits set on everything, but when you have a lot of smart people trying to solve problems, those limits just mean you have to get creative with design. That’s exactly what the engineers have done with the new Callaway wedge and its Jaws grooves. By changing the overall shape compared to all previous models, they have increased not just spin but total control. That’s probably the most overlooked part of the wedge equation: creating greater control and consistency. Sure, more spin is great, but if it fluctuates from shot to shot, you are in no way better off.

The new proprietary groove design of the Jaws wedge is a change to the whole shape, including a different way to get the contact radius right to the limit, and when we say right to the limit, we mean it. In fact, when initially prototyped and brought to Callaway’s manufacturing partners for scaled-up manufacturing, the initial response from the factory after test runs was “sorry, we just can’t do this.” The reason? Fail rate was close to 50 percent becoming nonconforming which is a big no-go in the world of manufacturing. Such a situation would drive cost (because of losses) through the proverbial roof, especially when you consider each wedge’s face takes 10 minutes of machine time—not including the microgrooves.

The solution for Callaway? Changing the cutting tool every 15 wedges. Sure, you could attempt to get more life out of each tool, but when you have everyone from recreational players to the world’s best putting them in play, you can’t make sacrifices.

Callaway 2020 MD5 JAWS Wedge Grooves

Callaway 2020 MD5 Jaws wedge: groove detail

The end result is the MD5 Jaws spins over 10 percent more on shots hit around the green compared to the Callaway MD4 and launches lower by one degree (for those wondering if one degree matters: yes it does). Lower launch might not seem like something you want with a wedge, but if you talk to any short game coach with a launch monitor, or Roger Cleveland in Callaway’s case, you will quickly realize that being able to control launch with a wedge is just as important and is it with a driver. A lower-launching wedge means the coefficient of friction is higher since the ball isn’t riding/sliding up the face—and boom, you have a greater ability to hit the better-player-preferred “low checker.”

Now beyond the grooves, Callaway and the wedge team re-evaluated the whole shape and profile of the MD5 Jaws, along with the grind options. As the trend of more players swapping their stock pitching wedges for wedges that match the lower end of the bag (up to 45-46 degrees). Callaway designers decided to reshape the lower lofted wedges from the 46-56 degrees to have a smaller profile and flow better from the lowest to highest loft in the wedge set. Don’t think this is just for looks either—smaller heads allow for more concentrated mass and with a smaller shape comes better workability. There is no sense in trying to replace your stock set pitching wedge with a less versatile option.

Callaway Jaws MD5 wedge face

The other reason for this change in the MD5 Jaws wedges is that data and player testing shows the 46- 56-degree clubs are used a lot more often for full shots compared to the higher lofted wedges, which are more likely than not to be hit with a more open face. This creates the ability to flight and control the ball better with the “full swing” clubs, yet still gives more face surface area to hit when the higher lofted “around the green” clubs and opened up. It’s a “best of both worlds” design philosophy. Instead of committing to a single size and shape for the whole line—which from a manufacturing perspective is less expensive—Callaway pulled out all the stops in making the Jaws wedges better, not just newer.

New Callaway wedge face

With all the talk of reshaping, the last part of this puzzle are the sole grinds. From the C Grind to the W (wide) sole wedges, everything has been tweaked. One of the best examples of this tweaking is the new lower bounce W (Wide) sole wedge. Mr. Roger Cleveland himself was doing a lot of customizing for tour players to tweak the stock MD4 W Grinds to reduce bounce and width of the soles, and after seeing this trend, the most popular tweak has now become a stock option on the MD5 Jaws.

There is even additional heel relief to help those players that want to open the face up for shots around the green. The opposite could be said about the new C Grind; with more effective bounce thanks to a wider center of the sole—but more playability with aggressive heel and toe relief. What seem like small changes are really a commitment to continued improvement by the wedge team at Callaway Golf, and I think with the MD5 Jaws wedges they have a winner destined to take a BITE out of the wedge market (Give me credit for taking this long to make a shark pun).

Customs

With the new MD5 Jaws, Callaway is upping its Customs game with 10 different “zones” to choose from, including the paint fill on the sole, the hosel, new medallion options (including emojis), and the back of the club. More ways to customize your wedge than ever before!

Callaway Jaws MD5 wedges: Availability and options

Shafts

Steel: True Temper Tour Issue 115 with a blue and silver shaft band


Graphite: Project X Catalyst 80g

Grip: Lamkin UTX Blue

Price: $159.99

 

 

 

Your Reaction?
  • 130
  • LEGIT19
  • WOW6
  • LOL9
  • IDHT1
  • FLOP8
  • OB9
  • SHANK20

Ryan Barath is a writer & the Digital Content Creation Lead for GolfWRX. He also hosts the "On Spec" Podcast on GolfWRX Radio discussing everything golf, including gear, technology, fitting, and course architecture. He is a club fitter & master club builder who has more than 16 years experience working with golfers of all skill levels, including PGA Tour professionals. He studied business and marketing at the Mohawk College in Hamilton, Ontario, Canada, and is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop in Hamilton and is a member of advisory panels to a select number of golf equipment manufacturers, including True Temper. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, from course architecture to physics, and share his passion for club building, and wedge grinding.

9 Comments

9 Comments

  1. chadj

    Sep 10, 2019 at 8:13 pm

    No LH 46 degree or 64 degree, but 5 different LH options for a 60 degree. Seems fair callaway….idiots

  2. Milo

    Sep 10, 2019 at 7:07 pm

    Why are wedges so damn expensive?

    • gwelfgulfer

      Sep 11, 2019 at 9:00 am

      Because people continue to pay the prices. Lemmings will always lemming.

  3. DB

    Sep 10, 2019 at 3:10 pm

    They look good, forged or cast?

  4. Greg

    Sep 10, 2019 at 12:31 pm

    The steel shaft offering sucks.

  5. Travisty

    Sep 10, 2019 at 9:26 am

    These are actually a nice step forward from MD4 (and MD3 before that). Callaway is doing great things in their wedge department. The black finish here IMO is much better than before too.

  6. Off-Centre ChromeSoft

    Sep 10, 2019 at 8:05 am

    Find it, cut it.

  7. Bradley

    Sep 10, 2019 at 7:46 am

    I wonder if Callaway clubs are off like there golf balls?

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Forum Thread of the Day: “New PXG putters”

Published

on

Today’s Forum Thread of the Day showcases an array of new PXG putters. The flat-sticks have got our members talking, with the new look and weighting options proving to be popular amongst WRXers.

For lots more photos, check out the full thread here.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • nova6868: “These new putters look so much better than their first line.”
  • keto: “My eyes a popping out. I could roll most of those confident I would put a decent stroke on them. I haven’t checked $$, I imagine they are $$$$$, but I sure like the weighting options.”
  • chip75: “Look so much cleaner without the weights visible.”

Entire Thread: “New PXG putters”

 

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Forum Thread of the Day: “New Mitsubishi AV shafts”

Published

on

Today’s Forum Thread of the Day showcases new Mitsubishi AV shafts which have caught many of our member’s interest. While speaking in the thread, Mitsubishi Chemical shared some details to WRXers on what they can expect to see soon:

“We are working on bringing 2nd Gen Tensei product to market – this is the first week of PGA Tour testing.

Be sure to stay tuned for more information towards the beginning of 2020!”

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • AdamStoutjesdyk: “I’m already a huge fan of the Pro White, I can’t wait to see how these look and perform in person!”
  • ForTourUseonly: “Please make an Orange!”

Entire Thread: “New Mitsubishi AV shafts”

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Honma launches new XP-1 Series driver, fairway woods, and hybrids for 2020

Published

on

new 2020 Honma Driver

For 2020, Honma Golf is launching the all-new XP-1 line of clubs comprised of an entire family holistically designed to help players maximize forgiveness and get the most out of their games with one set. The new Honma XP-1 drivers, fairway woods, and hybrids, all the way to irons, is a new direction for the premium Japanese company that brings together ultimate craftsmanship with performance.

The highlight of the XP-1 line from Honma is the fact that they were designed from top to bottom to work as a comprehensive set of tool to achieve maximum performance. The technology in the metal woods flows from the driver to the hybrids with a seamless transition that creates consistency for feel and looks for the player.

Honma XP-1 driver

new 2020 Honma Driver

New 2020 Honma Golf Driver

Honma is known for its dedication to quality and craftsmanship, and every part of the XP-1 line was developed with the golfer in mind to both look appealing and perform to the highest standards. The XP-1 driver packs a lot of technology into a very classic looking club, and we’re here to take you under the hood—or in this case, the carbon fiber crown—to show you how it can help you hit better shots.

2020 Honma XP1 Driver toe

Honma XP-1 Driver Toe

It starts with a tour-inspired look from address, designed to inspire confidence for any level of golfer. Underneath ther gloss black crown, there is a lot of technology to generate faster ball speeds around the entire face and help get you dialed into the right setting. Speaking to the crown, it’s made from ET-40 fiber, making it one the lightest in golf. This weight savings helps engineers relocate an additional 15g of mass around the head towards the heel for increased MOI and greater ability to help players close the club face more easily.

Flip the driver upside down, and we have a lot more going on with the sole than initially meets the eye. Honma is introducing a new double slot in the sole for increased ball speed across a much larger area of the face. What starts off smaller in the middle increases in width and depth as it reaches towards the heel and the toe of the club. These slots, along with improved MOI, keep ball speeds up and misses closer to the intended target. The last part of the equation: How these wider parts of the face, flex around the more narrow middle to also increase gear effect—think of it like one more way to help the bigger misses stay in play.

New 2020 Honma Driver XP1

2020 Honma XP-1 Driver sole and shaft adjustment connection

The last piece key piece of technology in the XP-1 driver head is exclusive to Honma—the adjustable hosel that changes face angle, lie, and loft, but never changes the orientation of the shaft. This gives the player or fitter the ability to truly dial in hosel settings without having to worry about the constantly changing of the grip orientation. This, according to Honma, also keeps the shaft spine in the ideal location for consistent performance.

Honma 2020 xp1 driver shaft

Honmq Vizard 43g shaft

Honma is the only manufacturer that produces its own shafts from start to finish in house, and the XP-1 is getting its own custom-designed and built shafts to complement the technology built into the heads. The Vizard stock shafts are engineered to produce a smooth feel that promotes faster clubhead speeds, yet also remain extremely stable. For the XP-1 driver, the matching Vizard shafts will come in weights of 43g, 53g, and 63g, and flexes from senior to stiff.

Honma XP-1 fairway woods

The XP-1 woods bring the same level of craftsmanship and technology as the drivers to a club designed for use both off the tee and off the fairway.

New for 2020 Honma XP-1 Fairway wood

New for 2020 Honma XP-1 Fairway wood

The Honma XP-1 3-wood uses the same weight-saving ET-40 crown to position a large amount of the club’s total mass low and on the sole for greatest possible launch and spin consistency. The 3-wood is the second-lightest club in most players bags by total weight and head mass, and unless you are carrying a second driver, it’s also the second-largest by volume. By using the carbon crown designers get everything they can from the other technologies including the double slot sole and thin fast face without having to sacrifice the overall design of not just the head but the entire club.

New Honma XP-1 3 wood crown fairway

Honma XP-1 3 wood crown

The XP-1 fairways also include a 5  7-woods, but with the smaller volume of the heads and the reduced crown size, using a carbon crown would actually increase the mass higher in the head, so they instead utilize an extremely thin high strength steel crown.

New Honma 53g Vizard Fairway Shaft XP1

Honma 53g Vizard Fairway Shaft

All of the fairway woods come with the same made-in-Sakata, Japan 43g, 53g, and 63g Vizard shaft options as the driver to help every player get the most of each club in the set. If might seem like a minor detail, but being able to design an entire club in house from head to grip is a big advantage for Honma versus other OEMs. This holistic approach to designing an entire club/set is a big benefit to the consumer looking to get the most out of each club in their bag and not feel like something may be working against them.

Honma XP-1 hybrid

With the Honma XP-1 hybrid, forgiveness and flow from the fairway woods is the number one consideration for these club. The flow includes a wood-like shape that keeps the club shallow and the center of gravity as low as possible for higher launch and approach shots that fly higher and land softer. Considering the target player for the XP-1 line, the wood-like shape is also very confidence-inspiring.

New 2020 Honma XP1 hybrid

Honma XP-1 Hybrid

Honma continues the design philosophy of keeping the XP-1 both forgiving and fast by utilizing the double slot sole all the way into these hybrids that go from a 19-degree 3-iron replacement to a 25-degree 5-iron replacement.

Honma XP-1 specs & availability

The Honma XP-1 driver, fairway wood, and hybrids will be available starting in October.

New 2020 Honma XP1 Driver fairway hybrid specs

Honma XP-1 line club specs

Your Reaction?
  • 35
  • LEGIT4
  • WOW1
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK6

Continue Reading

19th Hole

Facebook

Trending