Connect with us

Equipment

Forum Thread of the Day: “Smallest blade iron ever made?”

Published

on

Today’s Forum Thread of the Day comes from justasgood who asks WRXers for their view on the smallest iron blade ever made. Our members discuss what they believe to be the smallest blade head that has been made as well as the smallest blade irons that they have ever played.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Fairway14: “’70s era Dunlop/Maxfli Australian blades were small heads. So were any of the ’60s and ’70s era Wilson Staff blades.For comparison, any of the blades made during the past 20 years, from companies such as Mizuno, have head sizes about 15% to 20% larger than older blade irons.”
  • Oet11: “Went digging through the garage found Arnold Palmer 3 iron from the late ’70s, smaller than my Cobras.”
  • golfguycanada: “I have some older Wilson “staff” blades that would look perfectly natural at a table setting for a five-course dinner. You could literally butter the bread with them.”
  • rgk5: “1983 Cleveland 588 blades. Miniscule and the smallest I ever saw and played.”

Entire Thread: “Smallest blade iron ever made?”

Your Reaction?
  • 9
  • LEGIT3
  • WOW2
  • LOL2
  • IDHT3
  • FLOP4
  • OB1
  • SHANK6

Gianni is a freelance writer. He holds a Bachelor of Arts as well as a Diploma in Sports Journalism. He can be contacted at gmagliocco@outlook.com. Follow him on Twitter @giannimosquito

9 Comments

9 Comments

  1. Blade Fan

    Sep 5, 2019 at 12:40 am

    Miura 1957s

  2. Speedy

    Sep 4, 2019 at 3:36 pm

    1973 Ben Hogan Apex

  3. Dan W

    Sep 4, 2019 at 2:36 am

    rgk5: “1983 Cleveland 588 blades. Miniscule and the smallest I ever saw and played.”
    I don’t know what your talking about since Cleveland 588 were originally called that because it was the 5 th wedge design in 1988. Before that it was the 485. All 588 irons were after 1988.
    My vote is for the Muira baby blades. If you know them there’s no other choice.

  4. Scott Glynn

    Sep 3, 2019 at 6:52 pm

    Early to mid 80’s MacGregor VIP’s/Muirfields

    • James

      Sep 3, 2019 at 7:42 pm

      This. Muirfield 20th 1 iron looks impossible to hit. Maybe it wasn’t meant to be hit since it was a commemorative model for his 20 majors.

      • Dan

        Sep 4, 2019 at 4:00 am

        I had the 1 iron. It wast hard to hit Bc it was so small the sweet spot took up the entire face

    • The dude

      Sep 3, 2019 at 8:55 pm

      Boom!..this

  5. Terry

    Sep 3, 2019 at 1:18 pm

    Ram Tour Grinds were pretty small

    • Juan A Lopez

      Sep 9, 2019 at 2:32 pm

      I agree. Ram tour grinds early 90’s. One’s Nick Price played…

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Jon Rahm WITB 2020

Published

on

  • Equipment accurate as of the WGC-Mexico Championship

Driver: TaylorMade SIM (10.5 degrees)
Shaft: Aldila Tour Green 75 TX

3-wood: TaylorMade SIM (15 degrees @ 16.5)
Shaft: Aldila Tour Green 75 TX

5-wood: TaylorMade SIM (19 degrees @ 20.5)
Shaft: Graphite Design Tour AD-DI 8 X

Irons: TaylorMade P750 (4-PW)
Shafts: Project X Rifle 6.5

Wedges: TaylorMade Hi-Toe (52 degrees), TaylorMade MG2 (56-12, 60-TW-11)
Shafts: Project X Rifle 6.5

Putter: TaylorMade Spider X (36 inches)

Ball: TaylorMade TP 5 (#10)

Grips: Golf Pride MCC Red/Black Midsize (1 wrap of tape)

Your Reaction?
  • 9
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP1
  • OB0
  • SHANK2

Continue Reading

Whats in the Bag

Dustin Johnson WITB 2020

Published

on

Driver: TaylorMade SIM (10.5 @ 10 degrees, D4 swing weight)
Shaft: Fujikura Ventus Black 6 X (tipped 1 inch, 45.75 inches)

Fairway wood: TaylorMade SIM Max (15 degrees)
Shaft: Aldila RIP Alpha 90 X

Hybrid: TaylorMade SIM Max Rescue (22 @ 19 degrees)
Shaft: Project X HZRDUS Black 105 X

Irons: TaylorMade P790 (3), TaylorMade P730 DJ Proto (4-PW)
Shafts: True Temper Dynamic Gold Tour Issue X100 (soft stepped)

Wedges: TaylorMade MG2 (52-09, 60-10 @ 62 degrees)
Shafts: KBS Tour Custom Black 120 S

Putter: TaylorMade Spider Tour Mini
Grip: SuperStroke Traxion Pistol GT 1.0

Ball: TaylorMade TP5

Grips: Golf Pride Tour Velvet 58R (1 wrap 2-way tape + 2 wraps left hand, 3 right hand)

Your Reaction?
  • 39
  • LEGIT5
  • WOW1
  • LOL1
  • IDHT2
  • FLOP1
  • OB1
  • SHANK4

Continue Reading

Equipment

Top 10 clubs of 2003—inspired by Adam Scott’s Titleist 680 irons

Published

on

As has been well documented, Adam Scott recently won the Genesis Invitational with a set of Titleist 680 blade irons, a design that was originally released in 2003. One of the great benefits of being one of the best players in the world is you don’t need to search eBay to find your preferred set of 17-year-old irons. Titleist has been stocking sets for Mr. Scott—even to the point of doing a limited production run in 2018 where they then released 400 sets for sale to the general public.

A lot of time has passed since 2003, and considering the classic nature of Scott’s Titleist 680, I figured now was a good time to look back at some other iconic clubs released around the same time.

Ping G2 driver

This was Ping’s first 460cc driver with a full shift into titanium head design. The previous Si3 models still utilized the TPU adjustable hosel, and this was considered a big step forward for the Phoenix-based OEM. The driver was a big hit both on tour and at retail—as was the rest of the G2 line that included irons.

TaylorMade RAC LT (first gen) irons

The RAC LTs helped position TaylorMade back among the leaders in the better players iron category. The entire RAC (Relative Amplitude Coefficient) line was built around creating great feeling products that also provided the right amount of forgiveness for the target player. It also included an over-sized iron too. The RAC LT went on to have a second-generation version, but the original LTs are worthy of “classic” status.

TaylorMade R580 XD driver

Honestly, how could we not mention the TaylorMade R580 XD driver? TM took some of the most popular drivers in golf, the R500 series and added extra distance (XD). OK, that might be an oversimplification of what the XD series offered, but with improved shape, increased ball speed outside of the sweet spot, and lower spin, it’s no wonder you can still find these drivers in the bags of golfers at courses and driving ranges everywhere.

Titleist 680MB irons

The great thing about blades is that beyond changing sole designs and shifting the center of gravity, the basic design for a one-piece forged head hasn’t changed that much. For Adam Scott, the 680s are the perfect blend of compact shape, higher CG, and sole profile.

Titleist 983K, E drivers

If you were a “Titleist player,” you had one of these drivers! As one of the last companies to move into the 460cc category, the 983s offered a classic pear shape in a smaller profile. It was so good and so popular, it was considered the benchmark for Titleist drivers for close to the next decade.

Cleveland Launcher 330 driver

It wasn’t that long ago that OEMs were just trying to push driver head size over 300cc, and Cleveland’s first big entry into the category was the Launcher Titanium 330 driver. It didn’t live a long life, but the Launcher 330 was the grandaddy to the Launcher 400, 460, and eventually, the Launcher COMP, which is another club on this list that many golfers will still have fond memories about.

Mizuno MP 33 irons

Although released in the fall of 2002, the Mizuno MP 33 still makes the list because of its staying power. Much like the Titleist 680, this curved muscle blade was a favorite to many tour players, including future world No. 1 Luke Donald. The MP 33 stayed in Mizuno’s lineup for more than four years and was still available for custom orders years after that. Unfortunately, if you are looking for a set now you are going to have to go the used route.

Callaway X-16 irons

The Steelhead X-16 was a big hit at retail for Callaway. It offered greater forgiveness than the previous X-14’s but had a more compact shape with a wider topline to inspire confidence. They featured Callaway’s “Notch” weighting system that moved more mass to the perimeter of the head for higher MOI and improved feel. There was a reduced offset pro series version of the iron, but the X-16 was the one more players gravitated towards. This is another game improvement club for that era that can still be found in a lot of golf bags.

Ben Hogan CFT irons

The Hogan CFTs were at the forefront of multi-material iron technology in 2003. CFT stood for Compression Forged Titanium and allowed engineers to push more mass to the perimeter of the head to boost MOI by using a thin titanium face insert. They had what would be considered stronger lofts at the time sounded really powerful thanks to the thin face insert. If you are looking for a value set of used irons, this is still a great place to start.

King Cobra SZ driver

In 2003, Rickie Fowler was only 15 years old and Cobra was still living under the Acushnet umbrella as Titleist’s game improvement little brother. The Cobra SZ (Sweet Zone, NOT 2020 Speed Zone) was offered in a couple of head sizes to appeal to different players. The thing I will always remember about the original King Cobra SZ is that it came in an offset version to help golfers who generally slice the ball—a design trait that we still see around today.

Your Reaction?
  • 122
  • LEGIT11
  • WOW8
  • LOL3
  • IDHT1
  • FLOP2
  • OB1
  • SHANK8

Continue Reading

WITB

Facebook

Trending