Connect with us

Equipment

New Mitsubishi Chemical ZF shaft in play at the Tour Championship

Published

on

Even after winning just a week ago, Justin Thomas has put a new MCA Diamana ZF-Series shaft into play for the Tour Championship and FedEx Cup Final this week at East Lake Golf Club. JT is using the 60g TX version in his 9.5-degree Titleist TS2 driver (see Thomas’ BMW Championship-winning WITB here).

MCA has confirmed the new shaft and given us some great information on why it is are adding this fourth profile to the Diamana line—something the company has never done before.

The new Diamana ZF has taken the easy loading bend profile from the BF-Series and tweaked it in certain spots along the length to further maximize the design and find greater performance for players across swing speed ranges.

“The result is a profile that makes ZF a little more explosive and easier to accelerate.” -Mark Gunther, Vice President of Sales and Marketing for MCA GOLF.

Like the other shafts in the Diamana Fourth Gen. Series, the Diamana ZF shafts owe their stiffness and stability to two unique technologies. First: the MCA-developed MR70 carbon fiber material, and the second: Boron fiber. MR70 is found in both the butt and tip sections of the shaft and is 20 percent stronger than conventional materials, with a 10 percent greater modulus (a measure of stiffness). These designs have additional strength thanks to Boron fiber in the tip section to create the exact EI curve desired.

When you compare the new ZF to Diamana BF-Series, the ZF-Series shafts are a slightly stronger profile and built to have increased stability in both the butt and tip sections. They feature a softer, more active middle for better energy transfer and clubhead acceleration.

A cool feature for those looking to get a bit more distance but are on the lower end of the swing speed spectrum: There will also be a 40-gram version of the ZF, which is the lightest shaft of the fourth generation Diamana family.

“We’re extremely happy to have a 40g option within Diamana™ ZF,” says Gunther. “This opens the performance benefits of these unique Mitsubishi Chemical materials to a whole new range of players who prefer to play an ultra-lightweight shaft.”

Mitsubishi Diamana ZF-Series Availability and Specs

Diamana ZF-Series will be available September, 13 2019 at MCA GOLF authorized retailers and dealers nationwide, with a suggested retail price of $400.

Weights and flexes

  • DIAMANA ZF-Series 40 (R2, R, S Flex)
  • DIAMANA ZF-Series 50 (R, S, TX Flex)
  • DIAMANA ZF-Series 60 (S, TX Flex)
  • DIAMANA ZF-Series 70 (S, TX Flex)
  • DIAMANA ZF-Series 80 (S, TX Flex)
Your Reaction?
  • 56
  • LEGIT5
  • WOW0
  • LOL1
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Ryan Barath is a writer & the Digital Content Creation Lead for GolfWRX. He also hosts the "On Spec" Podcast on GolfWRX Radio discussing everything golf, including gear, technology, fitting, and course architecture. He is a club fitter & master club builder who has more than 16 years experience working with golfers of all skill levels, including PGA Tour professionals. He studied business and marketing at the Mohawk College in Hamilton, Ontario, Canada, and is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop in Hamilton and is a member of advisory panels to a select number of golf equipment manufacturers, including True Temper. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, from course architecture to physics, and share his passion for club building, and wedge grinding.

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Forum Thread of the Day: “New PXG putters”

Published

on

Today’s Forum Thread of the Day showcases an array of new PXG putters. The flat-sticks have got our members talking, with the new look and weighting options proving to be popular amongst WRXers.

For lots more photos, check out the full thread here.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • nova6868: “These new putters look so much better than their first line.”
  • keto: “My eyes a popping out. I could roll most of those confident I would put a decent stroke on them. I haven’t checked $$, I imagine they are $$$$$, but I sure like the weighting options.”
  • chip75: “Look so much cleaner without the weights visible.”

Entire Thread: “New PXG putters”

 

Your Reaction?
  • 12
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK4

Continue Reading

Equipment

Forum Thread of the Day: “New Mitsubishi AV shafts”

Published

on

Today’s Forum Thread of the Day showcases new Mitsubishi AV shafts which have caught many of our member’s interest. While speaking in the thread, Mitsubishi Chemical shared some details to WRXers on what they can expect to see soon:

“We are working on bringing 2nd Gen Tensei product to market – this is the first week of PGA Tour testing.

Be sure to stay tuned for more information towards the beginning of 2020!”

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • AdamStoutjesdyk: “I’m already a huge fan of the Pro White, I can’t wait to see how these look and perform in person!”
  • ForTourUseonly: “Please make an Orange!”

Entire Thread: “New Mitsubishi AV shafts”

Your Reaction?
  • 8
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Honma launches new XP-1 Series driver, fairway woods, and hybrids for 2020

Published

on

new 2020 Honma Driver

For 2020, Honma Golf is launching the all-new XP-1 line of clubs comprised of an entire family holistically designed to help players maximize forgiveness and get the most out of their games with one set. The new Honma XP-1 drivers, fairway woods, and hybrids, all the way to irons, is a new direction for the premium Japanese company that brings together ultimate craftsmanship with performance.

The highlight of the XP-1 line from Honma is the fact that they were designed from top to bottom to work as a comprehensive set of tool to achieve maximum performance. The technology in the metal woods flows from the driver to the hybrids with a seamless transition that creates consistency for feel and looks for the player.

Honma XP-1 driver

new 2020 Honma Driver

New 2020 Honma Golf Driver

Honma is known for its dedication to quality and craftsmanship, and every part of the XP-1 line was developed with the golfer in mind to both look appealing and perform to the highest standards. The XP-1 driver packs a lot of technology into a very classic looking club, and we’re here to take you under the hood—or in this case, the carbon fiber crown—to show you how it can help you hit better shots.

2020 Honma XP1 Driver toe

Honma XP-1 Driver Toe

It starts with a tour-inspired look from address, designed to inspire confidence for any level of golfer. Underneath ther gloss black crown, there is a lot of technology to generate faster ball speeds around the entire face and help get you dialed into the right setting. Speaking to the crown, it’s made from ET-40 fiber, making it one the lightest in golf. This weight savings helps engineers relocate an additional 15g of mass around the head towards the heel for increased MOI and greater ability to help players close the club face more easily.

Flip the driver upside down, and we have a lot more going on with the sole than initially meets the eye. Honma is introducing a new double slot in the sole for increased ball speed across a much larger area of the face. What starts off smaller in the middle increases in width and depth as it reaches towards the heel and the toe of the club. These slots, along with improved MOI, keep ball speeds up and misses closer to the intended target. The last part of the equation: How these wider parts of the face, flex around the more narrow middle to also increase gear effect—think of it like one more way to help the bigger misses stay in play.

New 2020 Honma Driver XP1

2020 Honma XP-1 Driver sole and shaft adjustment connection

The last piece key piece of technology in the XP-1 driver head is exclusive to Honma—the adjustable hosel that changes face angle, lie, and loft, but never changes the orientation of the shaft. This gives the player or fitter the ability to truly dial in hosel settings without having to worry about the constantly changing of the grip orientation. This, according to Honma, also keeps the shaft spine in the ideal location for consistent performance.

Honma 2020 xp1 driver shaft

Honmq Vizard 43g shaft

Honma is the only manufacturer that produces its own shafts from start to finish in house, and the XP-1 is getting its own custom-designed and built shafts to complement the technology built into the heads. The Vizard stock shafts are engineered to produce a smooth feel that promotes faster clubhead speeds, yet also remain extremely stable. For the XP-1 driver, the matching Vizard shafts will come in weights of 43g, 53g, and 63g, and flexes from senior to stiff.

Honma XP-1 fairway woods

The XP-1 woods bring the same level of craftsmanship and technology as the drivers to a club designed for use both off the tee and off the fairway.

New for 2020 Honma XP-1 Fairway wood

New for 2020 Honma XP-1 Fairway wood

The Honma XP-1 3-wood uses the same weight-saving ET-40 crown to position a large amount of the club’s total mass low and on the sole for greatest possible launch and spin consistency. The 3-wood is the second-lightest club in most players bags by total weight and head mass, and unless you are carrying a second driver, it’s also the second-largest by volume. By using the carbon crown designers get everything they can from the other technologies including the double slot sole and thin fast face without having to sacrifice the overall design of not just the head but the entire club.

New Honma XP-1 3 wood crown fairway

Honma XP-1 3 wood crown

The XP-1 fairways also include a 5  7-woods, but with the smaller volume of the heads and the reduced crown size, using a carbon crown would actually increase the mass higher in the head, so they instead utilize an extremely thin high strength steel crown.

New Honma 53g Vizard Fairway Shaft XP1

Honma 53g Vizard Fairway Shaft

All of the fairway woods come with the same made-in-Sakata, Japan 43g, 53g, and 63g Vizard shaft options as the driver to help every player get the most of each club in the set. If might seem like a minor detail, but being able to design an entire club in house from head to grip is a big advantage for Honma versus other OEMs. This holistic approach to designing an entire club/set is a big benefit to the consumer looking to get the most out of each club in their bag and not feel like something may be working against them.

Honma XP-1 hybrid

With the Honma XP-1 hybrid, forgiveness and flow from the fairway woods is the number one consideration for these club. The flow includes a wood-like shape that keeps the club shallow and the center of gravity as low as possible for higher launch and approach shots that fly higher and land softer. Considering the target player for the XP-1 line, the wood-like shape is also very confidence-inspiring.

New 2020 Honma XP1 hybrid

Honma XP-1 Hybrid

Honma continues the design philosophy of keeping the XP-1 both forgiving and fast by utilizing the double slot sole all the way into these hybrids that go from a 19-degree 3-iron replacement to a 25-degree 5-iron replacement.

Honma XP-1 specs & availability

The Honma XP-1 driver, fairway wood, and hybrids will be available starting in October.

New 2020 Honma XP1 Driver fairway hybrid specs

Honma XP-1 line club specs

Your Reaction?
  • 50
  • LEGIT8
  • WOW3
  • LOL2
  • IDHT1
  • FLOP1
  • OB1
  • SHANK10

Continue Reading

19th Hole

Facebook

Trending