Connect with us

Equipment

Forum Thread of the Day: “What to look for in used wedges?”

Published

on

Today’s Forum Thread of the Day comes from el_b00t who is on the hunt for some used wedges, and concerned over how much face wear may be too much, has sought the advice of WRXers. Our members share their views while often taking into account both groove wear and bounce options.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • cgasucks: “I’d buy a cheap cast wedge with grooves that haven’t worn out, preferably used. Grooves on forged wedges tend to shallow out a lot faster because of the softer metal.”
  • RogerInNewZealand: “588 Cleveland 52 58 in black five years old mid bounce.”
  • games: “Buy one 56* or 58* wedge with as much bounce as possible. 12* or 14*. Then learn to do everything with that one club. Chip, pitch, flop, sand play. Then, buy Monte’s short game video “Use the Bounce 2.0”
  • ZA206: “At a minimum, you need a PW and a SW. I’d also advise getting a gap wedge to go in between. I wouldn’t bother with a lob wedge until you have become proficient with the SW. I’d go to a golf shop and look at the new wedges and see what you like, then go on eBay and buy used previous year models of those wedges. Used wedges should be CHEAP since they are consumable.”

Entire Thread: “What to look for in used wedges?”

Your Reaction?
  • 3
  • LEGIT1
  • WOW1
  • LOL3
  • IDHT0
  • FLOP1
  • OB0
  • SHANK10

Gianni is the Managing Editor at GolfWRX. He can be contacted at [email protected].

1 Comment

1 Comment

  1. Tim

    Aug 10, 2019 at 1:54 pm

    Matt Kuchar is a dbag. Hee haw…

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Spotted: Project X Denali hybrid shaft

Published

on

Project X’s Denali wood shafts have been seen in more and more golf bags this year as we start off the season. As a refresher, Denali Blue is the mid-launch and mid-spin model while Denali Black is for players seeking lower launch and spin.

Denali combines great feel with stability and increased ball speed. Currently, Project X only offers Denali Blue and Black in wood shafts, but we spotted a hybrid shaft in Daniel Berger’s bag at the 2024 Zurich Classic.

The shaft looks to be a Denali Blue 105G – HY in TX flex. No word on details from Project X yet but we can assume that this is a mid-launching shaft that weighs around 105 grams in Tour X-Stiff flex.

Berger has this shaft in his TaylorMade P770 3-iron, likely for some added launch and spin to hold the green from longer distances.

Hopefully, this means we will see some more shafts coming under the Denali name in the future, as I think many of us would like to try one in a hybrid or utility iron!

 

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Daniel Berger WITB 2024 (April)

Published

on

  • Daniel Berger what’s in the bag accurate as of the Farmers Insurance Open. More photos from the event here.

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 7 X

6-wood: TaylorMade Qi10 Tour (21 degrees)
Shaft: Fujikura Ventus Black 8 X

Irons: TaylorMade P770 (3), TaylorMade Tour Preferred MC 2011 (4-PW)
Shafts: Project X Denali Blue 105 TX (3), Project X 6.5 (4-PW)

Wedges: Titleist Vokey Design SM9 (50-12F), Titleist Vokey Design SM10 (56-14F), Callaway Jaws Raw (60-08C)
Shafts: Project X 6.5 (50), True Temper Dynamic Gold Tour Issue S400 (56, 60)

Putter: Odyssey Ai-One Jailbird Mini DB
Grip: SuperStroke Zenergy PistolLock 1.0

Grips: Golf Pride Tour Wrap

Ball: Titleist Pro V1

Check out more in-hand photos of Daniel Berger’s clubs in the forums.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK0

Continue Reading

Equipment

Heavy Artillery: A look at drivers in play at the Zurich Classic of New Orleans

Published

on

What are the driver and shaft combinations of the best golfers in the world? For gearheads, it’s an endlessly interesting question — even if we can only ever aspire to play LS heads and 7 TX shafts.

At this week’s Zurich Classic of New Orleans, GolfWRX got in-hand looks at the driver setups of a wealth of players.

Check out some of the most interesting combos below, then head to the GolfWRX forums for the rest, as well as the rest of our galleries from New Orleans.

Rory McIlroy

Driver: TaylorMade Qi10 (9 degrees @8.25)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC

Alex Fitzpatrick

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride MCC

Daniel Berger

Driver: Ping G430 LST (10.5 degrees @9)
Shaft: Fujikura Ventus Black 6 X
Grip: Golf Pride Tour Wrap

Rasmus Hojgaard

Driver: Callaway Paradym Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
Grip: Golf Pride MCC

Alejandro Tosti

Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5
Grip: Golf Pride MCC Plus4

James Nicholas

Driver: Titleist TSR3 (8 degrees, A1 SureFit setting)
Shaft: Fujikura Ventus TR Blue 7 X
Grip: Golf Pride Tour Velvet

Kevin Streelman

Driver: Titleist TSR3 (10 degrees, D1 SureFit setting)
Shaft: Fujikura Ventus TR Black 6 X
Grip: Golf Pride Tour Velvet

Sang-moon Bae

Driver: Callaway Paradym Triple Diamond (9+ @8)
Shaft: Fujikura Ventus Blue 6 X
Grip: Golf Pride Tour Velvet

Russ Cochran

Driver: Callaway Paradym Ai Smoke (9 degrees)
Shaft: Graphite Design Tour AD TP 6 X
Grip: Golf pride MCC Align 

MJ Daffue

Driver: Callaway Paradym Ai Smoke Max (10.5 degrees @9.5)
Shaft: Project X HZRDUS Smoke Green RDX 65 TX
Grip: Golf Pride ZGrip Cord Align

Check our more photos from the Zurich Classic here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

WITB

Facebook

Trending