Connect with us

Equipment

2019 TaylorMade P790Ti Irons: Pure Premium Power

Published

on

Born from the quest to make great, greater, the 2019 TaylorMade P790Ti Titanium Irons go way beyond the original P790 in both materials and pushing the limits of speed. 2019 Taylormade titanium irons been the buzz on the street. By pairing some of the lightest and strongest materials with some of the most mass dense in one club, the engineers at TaylorMade have created a premium iron for the player looking for premium performance.

The body of the P790-Ti is iron is cast from 911 titanium—this is an important note because when you compare (in general terms) Ti vs. steel, their mass properties are vastly different.

Let’s do some science!

Stainless steel comes in around 8 g/cm3, Whereas titanium is 4.5 g/cm3. That makes steel 43 percent heavier than its titanium counterpart, which means the P790Ti is saving a TON of weight in its construction by using it as the whole body of the head including the face, but we’ll get to that in a minute.

If you think about a solid steel clubhead played at 37″ (usually a 7-iron), the head weight will be around 268g. If you use the above math, then the same clubhead made from titanium would only weigh 153g (rounded up). So how do we get that mass back to where it needs to be without making the head enormous? Tungsten: one of the most (stable) mass dense metals around.

The TaylorMade P-790Ti iron has up to 119g of tungsten in each clubhead to push the limits of forgiveness and drive the center of gravity as far back and as low as possible—that’s why the titanium has been placed on the exterior of the club’s frame.

So now to that face.

Supported by TaylorMade’s SpeedFoam, the machined titanium face is thin to produce maximum ball speed. By machining it, rather than casting, TaylorMade can precisely control the dimensions to save every last bit of weight.

With a face this fast and a CG going so far back, Chris Berman would have to actually take a breath when telling you about it.

You need stronger lofts—it’s physics and function rather than playing a numbers game. Without the stronger lofts, each iron wouldn’t hit the proper window for its trajectory. The other part of this that is often overlooked is the target market for these styles of irons—players NOT at the top end of clubhead speed; players wanting a higher flight and longer distances. Yeah, it’s fun to watch tour players mash 7-irons 220 yards for the cameras—I wish I could do that—but that’s not who these clubs are designed for.

This leads us to the rest of the package.

Obviously, the term “stock” is now a loose reference to a suggested final build based on player testing, but this sheds light on the what TaylorMade wants to accomplish with these irons. The paired shafts are, for steel, the new Nippon NS Pro 950 GH Neo (an update to their extremely popular 950 GH). For graphite, the shaft of choice is the Mitsubishi MMT available in varies weight options—see below.

 

Your Reaction?
  • 123
  • LEGIT18
  • WOW13
  • LOL13
  • IDHT3
  • FLOP6
  • OB4
  • SHANK29

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

16 Comments

16 Comments

  1. Aaron

    Aug 13, 2019 at 7:45 am

    4.5g to 8g is not 43% heavier.

    It’s 43% lighter

  2. the truth

    Aug 13, 2019 at 6:29 am

    $400 per club AND you need more wedges?

  3. Andy

    Aug 13, 2019 at 5:26 am

    The AW has finally broken through 50 degrees and 43.5 degree PW. Wow.

  4. Pillow Talk

    Aug 13, 2019 at 4:07 am

    $2700? That’s all? 😀

  5. Moses

    Aug 12, 2019 at 10:30 pm

    Wow I can probably hit the 9 iron 150 yards.

  6. Eric

    Aug 12, 2019 at 7:52 pm

    I’d like to see the P790Ti UDI, with the same aesthetics and 14-17* of loft. Looks so much better than the GAPR in my opinion. Just change where the tungsten is placed to get High/Mid/Lo equivalent of GAPR.

  7. Stewart

    Aug 12, 2019 at 5:16 pm

    These look great but I’m not likely to buy at this price.

    I’ve no issue with companies having a product at this level.

  8. KC

    Aug 12, 2019 at 5:00 pm

    $2700 for a 7 club set of irons. Go home Taylormade…you’re drunk.

  9. Clay

    Aug 12, 2019 at 4:47 pm

    5.5 degree gaps in the short irons? yikes

  10. Travisty

    Aug 12, 2019 at 4:17 pm

    Pure Premium Pricing—fixed that for you

  11. jason

    Aug 12, 2019 at 12:30 pm

    look how the masacred my boy.

  12. Bushwood Caddie

    Aug 12, 2019 at 11:30 am

    Running out of ideas to have a different type of club for every release? Their big tech is ICT (inverted cone technology) which they had back several years ago. Nice irons, but not at that price!

  13. dat

    Aug 12, 2019 at 10:37 am

    NO. Please for the love of Golf stop with these joker clubs.

  14. Ted

    Aug 12, 2019 at 9:24 am

    Ugly

  15. JP

    Aug 12, 2019 at 9:08 am

    And the price? A gazillion dollars a set?
    .
    And the face is cast THEN machined. Do t let the wording confuse. It’s cast.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): TaylorMade BRNR mini driver head

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a TaylorMade BRNR mini driver head

From the seller: (@lasallen): “For sale is a BRNR mini 11.5 deg head only in brand new condition.  $325 shipped.”

To check out the full listing in our BST forum, head through the link: TaylorMade BRNR mini driver head 

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Coolest thing for sale in the GolfWRX Classifieds (4/18/24): Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

Published

on

At GolfWRX, we are a community of like-minded individuals that all experience and express our enjoyment of the game in many ways.

It’s that sense of community that drives day-to-day interactions in the forums on topics that range from best driver to what marker you use to mark your ball. It even allows us to share another thing we all love – buying and selling equipment.

Currently, in our GolfWRX buy/sell/trade (BST) forum, there is a listing for a Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made.

From the seller: (@DLong72): “Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made. ?: $1150. ?? 100% milled collectors item from the limited releases commemorating when Ping putters won every major in 1988 (88 putters made). This was the model Seve Ballesteros used to win the 1988 Open Championship. Condition is brand new, never gamed, everything is in the original packaging as it came. Putter features the iconic sound slot.

Specs/ Additional Details

-100% Milled, Aluminum/Bronze Alloy (310g)

-Original Anser Design

-PING PP58 Grip

-Putter is built to standard specs.”

To check out the full listing in our BST forum, head through the link: Ping PLD Limited Anser – 1988 Open Championship – #2 of only 88 Made

This is the most impressive current listing from the GolfWRX BST, and if you are curious about the rules to participate in the BST Forum you can check them out here: GolfWRX BST Rules

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Inside Collin Morikawa’s recent golf ball, driver, 3-wood, and “Proto” iron changes

Published

on

As you probably know by now, Collin Morikawa switched putters after the first round of The Masters, and he ultimately went on to finish T3.

The putter was far from the only change he made last week, however, and his bag is continuing to change this week at the 2024 RBC Heritage.

On the range of The Masters, Morikawa worked closely with Adrian Reitveld, TaylorMade’s Senior Manager of Tour at TaylorMade, to find the perfect driver and 3-wood setups.

Morikawa started off 2024 by switching into TaylorMade’s Qi10 Max driver, but since went back to his faithful TaylorMade SIM – yes, the original SIM from 2020. Somehow, some way, it seems Morikawa always ends up back in that driver, which he used to win the 2020 PGA Championship, and the 2021 Open Championship.

At The Masters, however, Rietveld said the duo found the driver head that allowed “zero compromise” on Morikawa’s preferred fade flight and spin. To match his preferences, they landed on a TaylorMade Qi10 LS 9-degree head, and the lie angle is a touch flatter than his former SIM.

“It’s faster than his gamer, and I think what we found is it fits his desired shot shape, with zero compromise” Rietveld told GolfWRX.com on Wednesday at the RBC Heritage.

Then, to replace his former SIM rocket 3-wood, Morikawa decided to switch into the TaylorMade Qi10 core model 13.5-degree rocket head, with an adjustable hosel.

“He likes the spin characteristics of that head,” Rietveld said. “Now he’s interesting because with Collin, you can turn up at a tournament, and you look at his 3-wood, and he’s changed the setting. One day there’s more loft on it, one day there’s less loft on it. He’s that type of guy. He’s not scared to use the adjustability of the club.

“And I think he felt our titanium head didn’t spin as low as his original SIM. So we did some work with the other head, just because he liked the feel of it. It was a little high launching, so we fit him into something with less loft. It’s a naughty little piece of equipment.” 

In addition to the driver and fairway wood changes, Morikawa also debuted his new “MySymbol” jersey No. 5 TP5x golf ball at The Masters. Morikawa’s choice of symbols is likely tied to his love of the Los Angeles Dodgers baseball team.

Not enough changes for you? There’s one more.

On Wednesday at the 2024 RBC Heritage, Morikawa was spotted with a new TaylorMade “Proto” 4-iron in the bag. If you recall, it’s the same model that Rory McIlroy debuted at the 2024 Valero Texas Open.

According to Morikawa, the new Proto 4-iron will replace his old P-770 hollow-bodied 4-iron.

“I used to hit my P-770 on a string, but sometimes the distance would be a little unpredictable,” Morikawa told GolfWRX.com. “This one launches a touch higher, and I feel I can predict the distance better. I know Rory replaced his P-760 with it. I’m liking it so far.” 

See Morikawa’s full WITB from the 2024 RBC Heritage here. 

Your Reaction?
  • 73
  • LEGIT8
  • WOW2
  • LOL6
  • IDHT2
  • FLOP4
  • OB3
  • SHANK6

Continue Reading

WITB

Facebook

Trending