Master club builder Ryan Barath takes you inside his shop for the complete process of building a set of irons from start to finish.
- LIKE21
- LEGIT4
- WOW1
- LOL2
- IDHT0
- FLOP5
- OB5
- SHANK21
You hear that one all the time; I wish I could put my practice swing on the ball! We explain the huge importance of what to focus on to allow the ball to be perfectly in the way of your practice swing. Enjoy!
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK2
Earlier this week, Mitsubishi announced the return of its iconic Whiteboard profile with the new Diamana WB shaft.
In our launch story, we offered a rundown of the key technology in the new WB — 80-ton Dialead pitch fiber, Aerospace-grade MR70 carbon fiber, Consistent Feel Design, and the Xlink Tech Resin System. To go deeper, however, we enlisted our Resident Club Junkie and bona fide shaft nut, Brian Knudson, to track down someone from Mitsubishi at the PGA Show. Fortunately, Mitsubishi’s Director of Global Aftermarket Sales, Jonathan Alongi, was on hand to answer all of BK’s questions.
Check out their discussion about the new WB, as well as the 20th anniversary of the original design, in the video above — time stamps of key points below, including a definitive answer as to how the surfboard graphic ended up on the original Whiteboard in 2004!
- :40 – Mitsubishi Japan expands to the U.S. in 2004
- :50 – “The shaft that set the standard”
- 1:12 – “The ‘board is back”
- 1:45 – WB or Whiteboard? Or both?
- 1:55 – The first iteration of the sixth generation of Diamana
- 2:10 – Incorporating key technology from a 20-year journey
- 3:10 – Modifying the tip section for more ball speed
- 3:50 – Delivering ball speed in a low-launch, low-spin shaft
- 4:20 – Drilling down on the shaft profile compared to the original Whiteboard
- 5:00 – The most impressive element of the new WB
- 5:30 – Butt, mid, tip specifications
- 6:00 – WB’s iconic graphics and the Diamana legacy — flowers, surfboard, numbering system
- 8:15 – An abundance of available weights and flexes
- 8:55 – More players going lightweight
Check out more photos and see what GolfWRXers are saying about Mitsubishi WB in the forums.
- LIKE1
- LEGIT0
- WOW0
- LOL1
- IDHT1
- FLOP0
- OB0
- SHANK0
Our Resident Club Junkie, Brian Knudson, goes through a wedge fitting with Chris Baingo, Titleist’s Club Fitting Analyst.
Get the full story on new SM10 wedges in our launch piece.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP1
- OB0
- SHANK0
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole1 day ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 day agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
kent franklin
Jul 29, 2019 at 5:05 pm
I’ve learned a lot, Thanks!! Please explain how you polish Ferrules and with what? cloth belt, type, etc? They are my nemesis.
Thanks again.
kent franklin
Jul 29, 2019 at 4:53 pm
Favorite component heads to work with ?
Neil Cameron
Jul 29, 2019 at 12:47 am
McGolf is better
this is just attaching shafts that were already built.
not much to it
Ole Man
Jul 29, 2019 at 3:24 pm
Long winded presentation but spot on. Problem was he already had the grips on the shafts. Never build a set of irons without Spine Aligning the shafts. Don’t take my word for it – read the article by Mizuno on spine aligning shafts and the benefits.
Murv
Jul 29, 2019 at 3:42 pm
Yep. Soon as he said they were already gripped, I began to wonder about length and swing weight. Then he said the heads had been weighed and tip weights added. Those would have been interesting to watch him calculate.
Marks23
Jul 28, 2019 at 11:29 am
Any guidance on installing graphite irons shafts? Guidance on using shims for taper tip shafts in to parallel iron heads?
Ole Man
Jul 29, 2019 at 3:29 pm
Go to the Golfworks and purchase their shims .355 to .370 brass. 5 pieces to each container so you’ll have to buy 2 each. High quality product and will take care of the problem. I’ve been using their shims for a long time with no problem. Put the epoxy in the head and some on the shaft then insert the shim part way into the head. Using the shaft push the shim all the way into the head making sure it’s seated on the bottom and you’re good to go. I always wait 24 hours before hitting a club I’ve built. Epoxy needs time to cure properly. Hope this helps you.
Clint Merrill
Jul 27, 2019 at 8:27 pm
Absolutely the worst presentation I have ever seen, I am a 20 year veteran club maker and it was extremely difficult to follow his procedure.
From what I could conclude is that, he knows how and does very good work. How ever his presentation, skipping around, adjusting camera angles etc. would make most viewers turn him off within a few minutes.
E
Jul 28, 2019 at 11:29 am
Yeah, and he mumbles as if he’s got chew in his mouth all the time. People like this should not be on camera. That’s why we have writing lol
geohogan
Aug 3, 2019 at 9:07 am
Better editing would have made an improvement but
nevertheless a very good presentation for novice builders.
Joe Cardosi
Jul 27, 2019 at 7:34 pm
WHAT ABOUT SPINE ALIGNMENT OF THE SHAFT?
Mark
Jul 27, 2019 at 7:04 pm
Enjoyed video. Any guidance on installing graphite iron shafts? Also, guidance using shims on taper tip shaft to be installed in parallel bore head?
Dan
Jul 27, 2019 at 6:49 pm
Can you share contact info as I have been looking for Srixon build
Randy Wall
Jul 27, 2019 at 6:37 pm
Thank you, that was informative.
2putttom
Jul 27, 2019 at 12:01 pm
wonderful !
bob
Jul 28, 2019 at 11:56 am
What kind of tip weights were you using? Where do you get them? I noticed you did not use a tip weight in the 4 iron.
You did a swing weight on one club. How did you know to use tip weights on all the others?. What was the weight of the tip weights?
Where do you get the ferrules?