Connect with us

Equipment

Tiger Woods opts for lead tape on his Newport 2 rather than a heavier putter: Here’s why it makes sense

Published

on

After days of speculation about which putter Tiger Woods might end up with an attempt to tame the greens at Royal Portrush, we now officially know he settled on his old faithful GSS Scotty Cameron but with a twist—some added lead tape.

The whole reason the speculation was in high gear early in the week was because of Tiger was spotted with a new custom Scotty that had the Studio Select weights in the sole to increase head weight to help with slow greens, something Tiger has talked about in the past—especially when it comes to the greens at The Open Championship.

We can even look back a few years ago when Tiger finally put a Nike putter in play, the original Method (those were nice putters) and talked about both the increased head weight and the grooves on the face to help get the ball rolling on slower greens.

The decision to stick with the old faithful with added lead tape goes beyond just a comfort level, even if the two putters look the same at address, it’s about feel and MOI around the axis.

Let me explain. Sure the putter heads weight the same, but depending on where the mass is located it will change the MOI. The putter with the Select weights vs. lead tape in the middle will have a higher MOI because there is more weight on the perimeter of the head—it’s like a blade vs. cavity back iron. Sure, two 7-irons can weigh the same but the performance will vary significantly.

For a player with such deft feel like Tiger Woods, any change like that can could cause doubt. Tweaking an already great putting stroke and on the eve of the last major of the year is not really something you want to do, which is why it isn’t surprising he stuck with his legendary Newport 2.

Lead tape in the middle allows Tiger to increase the head weight with very little change to the natural rate of rotation for hit putter and hopefully manage the slower Portrush greens better.

Your Reaction?
  • 148
  • LEGIT20
  • WOW3
  • LOL14
  • IDHT4
  • FLOP8
  • OB7
  • SHANK25

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

16 Comments

16 Comments

  1. Jon

    Aug 7, 2019 at 3:36 pm

    Why would the rate of closure change between the two options? That closure relates to toe hang which is determined by the CG location along the heel – toe plane and the shaft axis. If you have lead tape in the cavity or equal weights placed on the heel and toe, the CG in this plane hasn’t shifted. MOI would increase with the latter but the toe release shouldn’t change.

  2. bobbyg

    Jul 29, 2019 at 9:30 pm

    Method 001 is a great putter. Wish Nike was still making clubs. There player stuff was clean and performed.

  3. s

    Jul 24, 2019 at 12:06 am

    For me heavier the putter, less worried about putting yips. All the blade putters these days feel very light in my hands yet most average golfers like me don’t have access to those professional grade fast greens. Do lighter putters have any distinctive advantages over heavier ones, besides they “may” work better on the very fast greens?

  4. Dave r

    Jul 22, 2019 at 9:23 pm

    I see it worked real well.

  5. geohogan

    Jul 22, 2019 at 8:01 pm

    I can’t imagine there being a huge amount of difference considering..
    impact of a putt is 1/1000 second.

  6. Bruce

    Jul 21, 2019 at 10:15 am

    The putter head probably weighs in excess of 300 g. Adding lead tape – even the heavy 1 g per inch is a painfully slow at to adjust weight. He could add few grams at best so we are talking 1%. You won’t feel that change, but it may adjust your head so you think it’s heavier and gain confidence.
    Also, Tiger knew his game was lacking and he was going home so why make permanent changes.

  7. Tiger

    Jul 20, 2019 at 11:12 pm

    Can’t even make the cut, he needs to be worried about more than lead tape!

  8. Pelling

    Jul 20, 2019 at 7:48 pm

    Tiger seems to put the lead tape in different places. Most of the time it’s on the sole, but here it is behind the face.

  9. Greg C

    Jul 20, 2019 at 3:08 pm

    I own three Macgregor Bobby Grace putters, 2 M5s and one M5K with the accessory weight sets. I’m good without the lead tape.

  10. hardpan1

    Jul 19, 2019 at 9:29 pm

    I’ve always heard heavier putter for fast greens, lighter putter for slow greens…hmmm

  11. Christopher

    Jul 19, 2019 at 6:47 pm

    I can’t imagine there being a huge amount of difference considering the head is solid stainless steel. The reason MOI and COG change with irons is due to the differing materials. There isn’t a huge difference between something like Titleist MBs and CBs, it’s far greater between MBs and say the Titleist AP1 (which can move extremes around due to their construction) irons. We know that movable weights on drivers (which have the biggest difference between the weight of their head components) only move the COG millimeters.

    It would be a coin-toss between different MOI and what Tiger feels and hears with a heavier putter. I imagine it’s down to Tiger wanting to use (and look down on) old-faithful and the feel of his Ping grip and the familiarity of it’s shaft.

  12. DB

    Jul 19, 2019 at 2:43 pm

    I find it amusing that some people say use a heavier putter for slower greens and others say a heavier putter is for faster greens. Nobody can agree.

    Also his Nike putter did not have grooves cut into the face, you can even tell on the picture posted. Yes there are black lines obviously, but no actual grooves cut onto the face like the retail version.

    • Doug

      Jul 19, 2019 at 8:59 pm

      Hot dang if you’re not right about the fake grooves. You can see the milling lines going through the black.

    • MKPAPA

      Jul 25, 2019 at 2:52 pm

      The grooves were filled totally with rzn and whole face was milled. As is the case with most of the Tour Stock Method’s.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Alejandro Tosti WITB 2024 (April)

Published

on

  • Alejandro Tosti what’s in the bag accurate as of the Zurich Classic.

Driver: Srixon ZX5 Mk II LS (9.5 degrees @10.5)
Shaft: Project X HZRDUS T1100 75 6.5

3-wood: TaylorMade Qi10 Tour
Shaft: Project X HZRDUS Black 80 TX

Hybrid: TaylorMade Qi10 Tour Rescue (22 degrees)
Shaft: Project X HZRDUS Smoke Black RDX 6.5 100

Irons: Srixon ZX7 Mk II (4-PW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100

Wedges: Cleveland RTX6 ZipCore Tour Rack (50-10 MID, 54-10 MID, 58-10 MID, 60-06 LOW)
Shafts: True Temper Dynamic Gold Mid Tour Issue X100, S400

Putter: Scotty Cameron

Grips: Golf Pride MCC Plus4

Check out more in-hand photos of Alejandro Tosti’s WITB in the forums.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Drew Brees WITB 2024 (April)

Published

on

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

Driver: TaylorMade Stealth 2 Plus (10.5 degrees)

Mini driver: TaylorMade BRNR Mini Copper (13.5 degrees)

5-wood: TaylorMade Stealth Plus (19 degrees)

Irons: TaylorMade P790 (4-8, PW), TaylorMade P760 (9)

Wedges: TaylorMade MG Hi-Toe (52-09, 56-10, 60)

Putter: Scotty Cameron Select Newport 2 Prototype

Check out more in-hand photos of Drew Brees’ clubs here.

Your Reaction?
  • 0
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Putter Roundup: 2024 Zurich Classic of New Orleans

Published

on

We always get some great photos of some phenomenal putters at tour events and love to share them. Here are a few from the 2024 Zurich Classic that caught our eye and seemed interesting. (And as a reminder, you can check out all our photos from New Orleans here)

MJ Daffue’s Scotty Cameron T-11 Prototype

MJ is going with the new Scotty Cameron T-11 Prototype this week. The putter is a multi-piece mallet that puts an emphasis on stability with the wings on the back. Daffue’s putter does have a design that differs from retail with a monotone finish, which eliminates the black paint on the aluminum parts that we see at retail. He also has a half siteline milled into the top and an L-neck welded on for some additional toe hang. The face features a deeper milling that should offer a softer feel and slightly quieter sound.

Scotty Cameron T-7.5 Prototype

We spotted a few different Scotty Cameron Phantom models with modified rear flanges. It looks like the straight black flange was cut into a half circle for a little softer look at address. On this T-7.5, you can still see the raw aluminum from the back view, so this might have been a last-minute job to get them out on tour. The semi-circle also has a white line on it, maybe to frame the ball differently.

Alex Fitzpatrick’s Bettinardi SS16 DASS

Alex’s SS16 is made from Bettinardi’s famous D.A.S.S., or double-aged stainless steel, for a softer and more responsive feel. The face has a unique diamond pattern milling and features a logo that I feel like I have seen before, but can’t put a name to. The putter is a classic mid-mallet style with a simple, single white siteline on the top. The sole is clean with just the SS16, DASS, and a green triangle logo on it.

Steve Stricker’s Odyssey White Hot No. 2

This putter has made some amazing putts in its long career! Stricker’s White Hot No. 2 might be in the top 10 of most famous putters in golf. When you see all the dents and lead tape, you know the heel will be up and it will be sinking putts! The soft White Hot insert looks to be in good shape and has less wear on it than the rest of the putter. We don’t know how much lead tape is on the sole, but it has to be multiple layers compacted down over the years.

Doug Ghim’s Scotty Cameron T-7 Prototype

This T-7 should win the award for “best color finish” in this list with its deep chromatic bronze. It looks like Scotty added a cherry bomb dot to the heel of the deep-milled face and filled it with a very dark blue paint. The rest of the putter looks pretty stock with its single site line on the topline and twin site lines down the “fangs” of the putter. Twin 5-gram weights are installed in the sole and the putter is finished off with a gloss black double bend shaft with a fill shaft offset.

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

WITB

Facebook

Trending