Equipment
WRX Spotted: TaylorMade Milled Grind 2 wedges
3M is all about innovation, and this week at the 3M Open, there’s another company showcasing a new innovation. Behold: TaylorMade Milled Grind 2 wedges.
We don’t have an official comment yet from TaylorMade, but based off of the pictures we have so far, we can draw a couple of conclusions about these new wedges (hopefully) coming soon to retail
- There appears to be some type polymer-filled cavity in the back of the wedge. It’s not a big cavity, and we’re not quite sure what its purpose might be, but it could be for a couple reasons: To remove mass, and direct the center of gravity, and/or to improve on the feel (and acoustics)
- Speaking to CG: There seems to be a shifting pad along the back of the wedges with increased thickness in certain areas. Again, this could be to change the feel and move the CG depending on the loft. Doing this can increase spin and trajectory control, which is something everybody wants.
- New face: Heres the give away that this wedge is very close to coming to retail: full-blown finished retail marketing material on the clubs. Anytime a club (any club) shows up with marketing material on the face, means that is has gone through a lot of different people and steps to get there. OEMs don’t put that kind of time into a face sticker without the product being close to hitting shelves.
Speaking to that sticker, TaylorMade is introducing raw-faced wedges. As it has been proven many times, a raw face won’t actually increase spin, but it will reduce glare…and also create a look preferred by many players. Taking a page from the old Nike playbook (remember the coated Engage wedges?), these stickers will keep the faces from rusting on shelves before they go into players’ bags.
The Milled Grind wedges have been a big winner for TaylorMade along with the Hi-Toe wedges, and if this is a sign that raw wedges are coming, then TM is going to have another winner on its hands…and in bags of tour pros and regular golfers alike.
- LIKE164
- LEGIT28
- WOW10
- LOL9
- IDHT4
- FLOP7
- OB3
- SHANK41
Equipment
Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage
Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.
It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.
When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”
“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”
View this post on Instagram
According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.
Here’s what Rietveld told GolfWRX.com on Wednesday:
“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.
“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.
“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.
“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.
“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”
So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.
His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.
See more photos of Rory testing the BRNR Mini here
- LIKE7
- LEGIT0
- WOW0
- LOL1
- IDHT0
- FLOP0
- OB0
- SHANK1
Equipment
Spotted: TaylorMade P-UDI driving iron
It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.
We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.
From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.
“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.
TaylorMade P-UDI 3-iron – 20°
TaylorMade P-UDI 4-iron – 22°
- Check out the rest of our photos from the 2024 RBC Heritage
- LIKE9
- LEGIT1
- WOW2
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Whats in the Bag
Collin Morikawa WITB 2024 (April)
- Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.
Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)
3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX
Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)
Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400
Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0
Grips: Golf Pride Z-Grip Cord
Ball: TaylorMade TP5x
- LIKE3
- LEGIT0
- WOW1
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole1 week ago
Dave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks ago
Things got heated at the Houston Open between Tony Finau and Alejandro Tosti. Here’s why
-
19th Hole1 week ago
Tiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole2 weeks ago
Report: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole3 days ago
Two star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole2 days ago
Neal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole2 weeks ago
Addiction, spinal fusion, and scam artists – Everything Anthony Kim revealed in candid interview with David Feherty
-
19th Hole2 weeks ago
Anthony Kim says doctors told him that he ‘may not have much time left’ ahead of LIV return
Gary Thompson
Jul 4, 2019 at 9:02 am
RB…You wouldn’t have issue with leaving the sticker on the face would you? Its not like stickers left on clubs are a pet peeve of yours right? Hahaha…
Clay
Jul 3, 2019 at 7:18 pm
The look down looks good. The rest? Too much “stuff”! Time will tell, good luck!
Jim
Jul 3, 2019 at 12:04 pm
The face reminds me of some of really old clubs with the odd face pattern when you look down at it. I really like the current model so hopefully these will be as good. But that face isn’t the best looking.
dat
Jul 3, 2019 at 9:01 am
pass. Make one without a raw face for the mass market, as most people will complain about it after two months when they didn’t clean the face to begin with. Their loss, but the customer will blame TM.
Travis
Jul 26, 2019 at 9:15 pm
The customer won’t complain. Plenty of OEM’s have raw wedges now. It’s becoming more normal and there’s a giant sticker telling you what’s going to happen to the face.
Jarnio Bubly
Jul 3, 2019 at 8:20 am
It looks kind of Hi Toeish already which is nice.
JP
Jul 2, 2019 at 10:53 pm
Just release the hi-toe with the flat leading edge and no gooseneck looking hosel. The one DJ carries. Give me that and I’m a buyer!
Brandon
Jul 2, 2019 at 10:49 pm
That is up there with the ugliest wedges of all time, even though the face is kind of cool looking.