Connect with us

Equipment

Titleist 620 MB, CB, and T100 irons to debut at U.S. Open

Published

on

It is always said that the U.S. Open is the ultimate test of skill and patience for a player’s entire game — driving, ball striking, recoveries, and putting.

In the case of ball striking, there really is no better proving ground than the U.S. Open, and this week Titleist is seeding the new 620 MB and 620 CB Irons along with a new addition to the line – T100 irons. The seeding process is Titleist’s way of getting new clubs into the hands of players under playing conditions and we say just a few weeks ago this same process for the new TS Hybrids and driving irons.

So far, the details are vague on what the new irons have in store from our friends in Fairhaven, Massachusetts but we can make some very obvious conclusions. The new 620 MBs and CBs will be the replacement for the current line of blade and cavity backs (I realize there couldn’t be a more softball take but it has to be said).

What is interesting about these new irons is the return to the 600 branding for Titleist, which was last used in the lineup for the 695 MB and CB irons, which go all the way back to 2006. The 600 name has always been associated with some of the best Titleist blades ever made including the 670, 680, and 690s.

Looking at the first release pictures of the new 620s, it’s yet to be seen if there are any multi-material aspects to the designs, but either way, I’m sure we will find out more details soon.

Speaking to multi-material what has also been included in this announcement are the T100s. They have an obvious AP look to them but in what also appears to be a smaller package.

The Titleist AP line has been a massive success since its introduction, but if there was one tiny bit of criticism (and I’m really searching here) it would be that it was harder to seamlessly blend the CB line into the AP line for those looking to build combo sets. Again this is early speculation, but if the new T100 has a smaller profile of the new CB but with the added ball speed and MOI of an AP iron, you could be seeing a lot of the T100s in the bags of players from pros to club golfer looking for that added advantage in the longer irons and even into the short clubs

Your Reaction?
  • 168
  • LEGIT20
  • WOW8
  • LOL207
  • IDHT4
  • FLOP218
  • OB216
  • SHANK244

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

17 Comments

17 Comments

  1. dat

    Jun 10, 2019 at 1:54 pm

    Let’s be honest, only the MBs look good, and at that – they’re probably going to be among the most unforgiving on the market.

  2. Jack

    Jun 10, 2019 at 1:25 pm

    Kuch suck a-hole

  3. F

    Jun 10, 2019 at 12:58 pm

    Fugly as ever

  4. Karl

    Jun 10, 2019 at 12:53 pm

    The MBs look amazing, I don’t care for the new CB look however – last model looked much cleaner IMO.

  5. DukeOfChinoHills

    Jun 10, 2019 at 12:12 pm

    The 620MB look gorgeous. The CBs are starting to look too busy. And the the T100 definitely look over designed. I’m not in the market, but I’m starting to get concerned where the iron lineup is going.

  6. The dude

    Jun 10, 2019 at 12:03 pm

    Who forges these?

    • A

      Jun 10, 2019 at 1:00 pm

      They’re forged of 8620 in Taiwan but they won’t tell you that

  7. 2putttom

    Jun 10, 2019 at 11:52 am

    wow ! I’m in

  8. Jordan

    Jun 10, 2019 at 10:45 am

    Was really looking forward to iteration #2 of the AP3s… wondering if that is still on the docket.

    • MacAllan

      Jun 10, 2019 at 10:59 am

      I’ve said it before but my post was deleted.
      AP’s are gone and replaced with T100 (AP2), T200 (AP3) and T300 (AP1).

      • Jordan

        Jun 10, 2019 at 12:15 pm

        Ah i guess i didnt know they were doing T200 or T300s as well. Good to know. I’m essentially just looking for a rocket 4 iron that i can hit 230 and the T200s and 300s hopefully will get me there. Thanks.

  9. Travis

    Jun 10, 2019 at 10:30 am

    Yes! Love the return of the curved muscleback! So many Titleist staffers have gone back to using the Titleist 680’s, not surprised to see Titleist go back to that design!

    I hope the T100 aren’t an AP2 replacement. The AP2’s have becoming iconic in their naming convention and it would be a bad move to go away from that.

  10. Dan

    Jun 10, 2019 at 9:30 am

    I’m still pissed I bought the MP-18 over the 716MB

  11. Johnny Newbern

    Jun 10, 2019 at 9:19 am

    The MB is the best looking club on the market. Love the return to the 600 classification.

    Ryan, any word on if the U500 will eventually be full set to replace the TMBs?

    • Ryan Barath

      Jun 10, 2019 at 10:29 am

      Great question but so far no news – by the looks of it I would say not likely at the moment

      • brian

        Jun 10, 2019 at 10:51 am

        Not sure if you mean Muscle Backs in general, or the 718 MB in specific when you say “MB is the best looking club on the market.” If the former, I agree. If the latter, I disagree. I’d put both the Callaway and Mizuno MBs over Titleist’s in the looks department.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 1
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending