Connect with us

Equipment

Forum Thread of the Day: “What’s your bunker play set up?”

Published

on

Today’s Forum Thread of the Day comes from Tmiller72 who asks fellow members to share their bunker play set up. From loft and bounce, as well as discussing different scenarios, our members share and discuss their philosophy and different strategies for when they are in the sand.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • ChipNRun: “I use my 54/12 SW. I try to keep my weight even on both feet, so I don’t dig in too much. Also…If I need to get it up really quick, it’s the 60/10. If the sand is wet and hard-packed, I’ll pick it off the top with a PW.”
  • Evilduckhunter: “Short ones or short sided is the TM Hi Toe 60 10 with four way sole. Longer shots it’s the Cleveland RTX4 56 10 full grind. I did give the 56 some heel and trailing edge relief.”
  • Joelsim: “Mack Daddy 4 58* X Grind, weight 75% on front foot, clubface very open, full swing with lots of speed. For longer bunker shots, i.e. over 20 feet, I use a lower lofted club, which one depends on the distance. Same full stroke every time.”
  • PlayfromtheBrain: “Vokey 60.06 K-grind (low bounce). I enjoy using it anywhere from about 90 yards and in, though the sand is where the grind really proves its worth. The wide sole pretty much guarantees a decent or better out for me. It’s great around the green, and I have no problem opening it up for different shots. Definitely has inspired confidence. This type of grind demands near perfect contact, but there isn’t a more versatile wedge than one with a wide sole and lower bounce.

Entire Thread: “What’s your bunker play set up?”

Your Reaction?
  • 0
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Gianni is a freelance writer. He holds a Bachelor of Arts as well as a Diploma in Sports Journalism. He can be contacted at gmagliocco@outlook.com. Follow him on Twitter @giannimosquito

Click to comment

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

New Mitsubishi Chemical ZF shaft in play at the Tour Championship

Published

on

Even after winning just a week ago, Justin Thomas has put a new MCA Diamana ZF-Series shaft into play for the Tour Championship and FedEx Cup Final this week at East Lake Golf Club. JT is using the 60g TX version in his 9.5-degree Titleist TS2 driver (see Thomas’ BMW Championship-winning WITB here).

MCA has confirmed the new shaft and given us some great information on why it is are adding this fourth profile to the Diamana line—something the company has never done before.

The new Diamana ZF has taken the easy loading bend profile from the BF-Series and tweaked it in certain spots along the length to further maximize the design and find greater performance for players across swing speed ranges.

“The result is a profile that makes ZF a little more explosive and easier to accelerate.” -Mark Gunther, Vice President of Sales and Marketing for MCA GOLF.

Like the other shafts in the Diamana Fourth Gen. Series, the Diamana ZF shafts owe their stiffness and stability to two unique technologies. First: the MCA-developed MR70 carbon fiber material, and the second: Boron fiber. MR70 is found in both the butt and tip sections of the shaft and is 20 percent stronger than conventional materials, with a 10 percent greater modulus (a measure of stiffness). These designs have additional strength thanks to Boron fiber in the tip section to create the exact EI curve desired.

When you compare the new ZF to Diamana BF-Series, the ZF-Series shafts are a slightly stronger profile and built to have increased stability in both the butt and tip sections. They feature a softer, more active middle for better energy transfer and clubhead acceleration.

A cool feature for those looking to get a bit more distance but are on the lower end of the swing speed spectrum: There will also be a 40-gram version of the ZF, which is the lightest shaft of the fourth generation Diamana family.

“We’re extremely happy to have a 40g option within Diamana™ ZF,” says Gunther. “This opens the performance benefits of these unique Mitsubishi Chemical materials to a whole new range of players who prefer to play an ultra-lightweight shaft.”

Mitsubishi Diamana ZF-Series Availability and Specs

Diamana ZF-Series will be available September, 13 2019 at MCA GOLF authorized retailers and dealers nationwide, with a suggested retail price of $400.

Weights and flexes

  • DIAMANA ZF-Series 40 (R2, R, S Flex)
  • DIAMANA ZF-Series 50 (R, S, TX Flex)
  • DIAMANA ZF-Series 60 (S, TX Flex)
  • DIAMANA ZF-Series 70 (S, TX Flex)
  • DIAMANA ZF-Series 80 (S, TX Flex)
Your Reaction?
  • 23
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Forum Thread of the Day: “Are 919 forged irons really that good?”

Published

on

Today’s Forum Thread of the Day comes from 9ironiscash who asked fellow members what they thought about Mizuno’s 919 forged ironsOur members dish out their experiences gaming the irons, with the majority of WRXers answering with a resounding yes to 9ironiscash’s original question.

Here are a few posts from the thread, but make sure to check out the entire thread and have your say at the link below.

  • Gmack1973: “I think the 919 forged are great irons. I play to a handicap of 4 and think I’m not a bad ball striker. I had the tours 6-pw, and they were great but a bit unforgiving if you don’t get them out the middle. I now have 919 forged 4 – PW and couldnt be happier. They have the Nippon Modus 120 stiff shafts.”
  • Gofguy224: “They are great irons! Had them for about a month and I’ve already shot 3 of my lowest scores ever! Very forgiving and they feel buttery soft
  • chjyner: “The whole 919 range is probably the best on the market “
  • PowerCobra98: “I like them. Moved from Apex 19’s into 919 Forged. I’ll likely be looking at a set of MP20 HMB’s though.”

Entire Thread: “Are 919 forged irons really that good?”

Your Reaction?
  • 15
  • LEGIT0
  • WOW2
  • LOL0
  • IDHT1
  • FLOP3
  • OB0
  • SHANK3

Continue Reading

Equipment

Forum Thread of the Day: “Your last ever set of irons?”

Published

on

Today’s Forum Thread of the Day comes from Nickc who asks fellow WRXers what they would choose if their next set of irons were the last clubs they could use. Some of our members mention a range of different irons which they would love to splash out on, while others choose between a set of clubs already in their possession.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • cfasucks: “If I had only 1 set to play with for the rest of my life it would probably be my 845s. They are great feeling and forgiving when I’m not at the top of my game, and they’re built like tanks.”
  • kekoa: “At this point, I’d have to choose Seven MB’s. At a price tag of about $4,000 4-PW I wouldn’t be able to afford another set.”
  • bodhi555: “That would be my VR Pros, as they do everything I need an iron to do. Feel awesome, let me get away with not being precisely on the centre of the face, look great and seem to go as far as some distance irons I’ve tried.”
  • Lumberjack627: “Think I’m going to get 790s, and that would be it for me.”

Entire Thread: “Your last ever set of irons?”

Your Reaction?
  • 6
  • LEGIT0
  • WOW0
  • LOL4
  • IDHT1
  • FLOP7
  • OB1
  • SHANK18

Continue Reading

19th Hole

Facebook

Trending