Connect with us

Equipment

Ping Blueprint irons are officially coming to retail

Published

on

After what has been much speculation they are here: Ping’s Blueprint forged blades.

Born from the idea of creating a club for the most exacting of golfers, Ping meticulously prototyped and tested in house with their tour staff and other highly skilled players on everything from preferred shots, grind, to blade size and shape. When it comes to shape, the Blueprints are one of the smallest blades on the market, but there’s some reasoning behind this.

From Ping:

“After extensive in-house research with varying head sizes, the findings revealed the theory of “aim small, miss small” was validated by many of the highly skilled players in the test, who produced tighter stat areas when hitting the more compact head.”

Only the bravest golfer will take on this 2-iron

It makes a lot of sense when you consider the fact that the more you concentrate mass, the more that mass will transfer energy when you get close to it right? It was that final design that we saw out on tour around nine months ago that has ended up becoming what we will see at retail. Tried tested and ready for fittings and finding their way into golf bags.

From Ping’s President John K Solheim:

“When we launched it on tour, a few players put it in play immediately and it wasn’t long before we had our first win. Based on a lot of their input, we were able to deliver exactly what they were looking for while expanding our iron offerings into a new category. We’re very pleased with the development process we went through and are looking forward to applying our learnings to future PING products.”

Like everything Ping, the company has gone the extra mile when it comes to engineering every last aspect of these irons. Even something as simple as a tip weight has a calculation attached to it. Just like the G410 irons, the Blueprint irons have a visible tungsten toe weight.

Let me explain: basically every iron on the market utilizes a tip weight, either inserted into the shaft or into a port in the bottom of the hosel. (We’re about to go deep into the weeds from a design standpoint but stick with me). There is 100 percent nothing wrong with OEMs using tip weights to achieve desired swing weight but when you use them you move the CG closer to the hosel/heel side of the club…not on a humanly noticeable level but certainly from a definite engineering perspective.

This is why Ping has always placed the CTP (Custom Tuning Port) in the middle of the club head, directly behind the COG. But with a forged blade this is NOT possible because it’s solid metal, but there is a way to keep that COG EXACTLY where you want it: taking the amount of needed mass, dividing it by two and placing equal amounts in the hosel and in the toe. Simple? Yes. Done by anyone else? No.

Ping Blueprint irons construction

Ping is utilizing a four-step, multi-stage process for the one-piece forging to create the Blueprint forged iron. This process provides very tight dimensional tolerance control within the compact design. The high-strength, 8620 carbon steel (same material used in the Glide forged wedges) increases the iron’s durability compared to other carbon steels, ensuring long-lasting performance. The Blueprint irons go through more than 50 steps in the manufacturing process, including milling faces and grooves to ensure quality control club after club with each and every head checked for absolute accuracy.

Details

  • Available in 2-PW, starting at $230 per club
  • Stock shaft options: True Temper Dynamic Gold 120 (S300, X100), Ping AWT 2.0 (R, S, X) with all other Ping shafts available at additional cost
  • Arccos Smart Sensor grips available at an additional cost

 

Your Reaction?
  • 246
  • LEGIT27
  • WOW17
  • LOL371
  • IDHT3
  • FLOP456
  • OB379
  • SHANK527

Ryan Barath is part of the Digital Content Creation Team for GolfWRX. He hosts the "On Spec" Podcast on the GolfWRX Radio Network which focuses on discussing everything golf, including gear, technology, fitting, and course architecture. He is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

24 Comments

24 Comments

  1. Mark

    Jun 9, 2019 at 11:47 am

    I tried those irons today. They are so easy to hit straight (smaller MOI makes it easier to square the face) and really very forgiving as for blades. There is no comparison to traditional Miura blades that are more demanding for sure. I am 2 hcp and I don’t think at all that better players will have any problem hitting them but rather will play better. This is one of bigger innovations lately.

  2. Dave r

    Jun 6, 2019 at 9:19 am

    Ping has to come up with a smaller golf ball now just so you can hit them. Just think at $100.00 bucks a dozen you would have the best of both worlds. You would be the envey of your club.

  3. Chris

    May 27, 2019 at 6:15 pm

    The blade length is WAY TOO SHORT. Otherwise, good looking iron.

  4. JP

    May 21, 2019 at 12:38 am

    Ping can thank PXG for allowing the price gouging. It’s ridiculous, but almost expected these days. Now with all these oem’s following in PXG’s model, PXG themselves introduces a lower priced iron model! They do a 180 and once again twist up the market! Haha.
    .
    Once my irons show heavy signs of wear, I won’t be buying anything. I’ll send them in to get cleaned up and rechromed. They’ll never leave the bag.

  5. Dan

    May 20, 2019 at 10:13 pm

    Thanks for the specs

  6. No Diggity

    May 20, 2019 at 7:31 pm

    was excited and debating picking up a set till the $1610 number showed up. You can pick up a new set of Cobra Mbs AND a F9 driver for that price and still have some greens fees cash left over.

  7. Rolando Rushay

    May 20, 2019 at 5:55 pm

    I love Ping irons..Have used them for years!! I play with the cavity backed and play well. I tried switching to forged irons & they’re not for me. Unless one is a Tour professional the average weekend player needs to keep it simple and easy because golf is a difficult game to play…why make it hard & costly..$230/ WOW!!!!

  8. T-Bone

    May 20, 2019 at 5:32 pm

    So PING made their name back in the 60’s, 70’s, and 80’s by inventing perimeter weighting. Now, in 2019, their touting the same blade technology they supposedly made obsolete way back when. Oh, and this 1940’s technology will now cost you what you could have bought a house for back then.

  9. Tom54

    May 20, 2019 at 5:13 pm

    Gorgeous club – funny name – way too expensive. $1800 for 8 irons? No thanks

  10. joe

    May 20, 2019 at 4:54 pm

    Don’t worry they will be in bargain bin in 5 years.

  11. todd

    May 20, 2019 at 4:34 pm

    TW irons are $250/ea, Miura are $280, PXG are $400, CNCPT are $500/ea. So the cost on these are outlandish because…

    I’m sure I would be deadly accurate buttering my toast in the morning with these. Hitting them would likely be another story 😉

  12. Cdub

    May 20, 2019 at 4:19 pm

    Looked amazing until seeing the price.

  13. Get in the hole

    May 20, 2019 at 3:17 pm

    $230 a club is outrageous. Just pricing the consumer out of the sport. But that said, these are for the serious of serious golfers. Ping does make good quality $600 iron sets that would work well for the majority of golfers. If you’re sporting these and not playing to at least a 2 handicap, you’re dumb.

    • Steve

      May 20, 2019 at 3:41 pm

      True, but not true enough! I’d wager a 2 hdcp would miss the 2-5i’s at least 30% of the time. Why put yourself through that kind of misery? A real player wouldn’t let ego cost himself that many strokes.

  14. Carl

    May 20, 2019 at 2:51 pm

    At $230 per club, you better be making money with these.
    If not, you’re looking like a poser.

    • David Lehmann

      May 20, 2019 at 3:20 pm

      Thats less than PXG and these look a heckuva lot better than those “toys”.

  15. steve

    May 20, 2019 at 2:51 pm

    I’d like to offer a couple of thoughts about this new offering from Ping. First, wow!, that is a good looking club. Second, how many people do they really expect will pay $200+/iron For a full set? Lastly, I play to a three handicap. So while I am not bad, I am certainly not that great. I do this with a premier weighted set of irons. Why would I want to make the game more difficult than it needs to be? Club manufactures need to know that NOT ALL of us are clueless consumers

    • Steve

      May 20, 2019 at 3:09 pm

      Correction…Premier should read “perimeter”

  16. BWatts

    May 20, 2019 at 2:42 pm

    Cue the Miura Baby Blade comparison! Smaller head=more mass concentrated to put into the ball. Last week I tested my small blades against ‘more friendly’ offerings: Mizuno, Cally Apex Pro, Srizon etc…none got the ball speed my small blades delivered. Cool to see this theory proved out by PING!

  17. dat

    May 20, 2019 at 1:50 pm

    Insane price. Perhaps PXG should offer to buy Ping, or is it the other way around?

  18. Milo

    May 20, 2019 at 1:28 pm

    Damn those are sexy, makes me drool. But for that price, maybe I’ll pick some up in 4 years.

  19. Ray

    May 20, 2019 at 11:24 am

    Wow! $230 per club?

    I’ve admired Ping and their engineering but that’s a pretty penny given some of the other irons in this class.

    • gunmetal

      May 20, 2019 at 12:41 pm

      Yeah, these guys like Ben Hogan and their ‘direct to’ model is going to start looking more and more attractive if we keep delving into $1600 7 piece iron sets, IMO.

  20. Dave Lawrence

    May 20, 2019 at 11:03 am

    Specs (in case anyone was curious):

    2 3 4 5 6 7 8 9 PW
    ___________________________________________________

    17.5 20 23.5 27 30.5 34 38 42 46

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Vijay Singh WITB 2020

Published

on

  • Equipment is accurate as of the Honda Classic. 

Driver: Callaway Epic Flash Sub Zero Triple Diamond (8.5 degrees @ 7.5)
Shaft: Fujikura Atmos Tour Spec 5 TX

3-wood: TaylorMade SIM (15 degrees)
Shaft: Fujikura Ventus Black 8 X

5-wood: TaylorMade M2 (18 degrees)
Shaft: Fujikura Motore Speeder VC 8.2 Tour Spec X

Irons: Mizuno MMC Fli-Hi (3), Mizuno MP-20 (4-PW; all bent one club weak)
Shafts: Nippon N.S. Pro Modus 3 Tour 105 X

Wedges: Wilson Staff FG Tour PMP (54-11, 59-10)
Shafts: Nippon N.S. Pro Modus 3 Tour 105 X

Putter: Odyssey White Hot Pro 2-Ball (long)

Ball:

Grips: Lamkin

Your Reaction?
  • 27
  • LEGIT3
  • WOW1
  • LOL2
  • IDHT0
  • FLOP1
  • OB1
  • SHANK1

Continue Reading

Equipment

Today from the Forums: “New Axis 1 Tour-HM models at the 2020 Honda Classic”

Published

on

Today from the Forums shines the spotlight on new Axis 1 Tour-HM models featured at this week’s Honda Classic. The flat-sticks have garnered lots of reaction from WRXers, with our members currently split on the unique designs.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • tiger99210: “I like them. Doesn’t look Odd at all.”
  • Barracuda: “I don’t get the hate on companies that are actually trying to do something better than what we have available. I don’t play axis1, but it was definitely on my shortlist, I ended up with a LAB putter. It does look funky; it also helps me score better than my stunning queen B6.”
  • Steel Dillo: “I’d be more interested if they were priced reasonably. Just don’t see what drives their cost up comparable to a fully milled specialty brand other than having Rose’s name on them. IMO, they should be in that $200-$250 range like their other putters.”

Entire Thread: “New Axis 1 Tour-HM models at the 2020 Honda Classic”

Your Reaction?
  • 5
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Cut Golf introduces Cut Blue DC golf ball – featuring higher compression and 360 dimple pattern

Published

on

Cut DC

Cut Golf has recently introduced the newest ball to its Cut Blue family—the Cut Blue DC, which features Dual Core technology, enhanced compression and a 360 dimple pattern.

The latest addition from Cut Golf is targeted towards golfers of all skill levels, and along with its Dual Core which bids to maximize initial velocity, the ball is Mantle designed to provide for high precision spin control as well as improved putting feel and sound.

The Cut Blue DC contains a 4-piece construction with a urethane cover designed to maximize spin and greenside feel, while the ball’s 360 dimple pattern is designed to increase aerodynamics.

The latest ball from Cut Golf is fully conforming to USGA rules, features 105 compression (up from 90 on the original Cut Blue) and arrives in both white and atomic yellow color codes.

The Cut Blue DC is available to purchase now at CutGolf.com and costs $29.95 per dozen.

Our friends at TXG, Tour Experience Golf, reviewed the Cut Blue DC, and you can check out the video below.

Your Reaction?
  • 31
  • LEGIT11
  • WOW6
  • LOL2
  • IDHT1
  • FLOP0
  • OB0
  • SHANK5

Continue Reading

WITB

Facebook

Trending