Connect with us

Equipment

Forum Thread of the Day: “How I learned to stop worrying and love single length irons”

Published

on

Today’s Forum Thread of the Day comes from pinestreetgolf who shared his experience using single length irons. In pinestreetgolf’s excellent and thorough write-up, he explains just how single length irons worked for him, despite his previous suspects, and why he feels others should considering making the move to single length clubs in the future.

“First, I made a mistake I am constantly on others for making. I thought all-or-none. The whole “same stance, same swing, same plane” thing isn’t true. However, I decided that since one of them wasn’t true (if the lie changes, it all changes), then none of it was true. That was dumb. It’s about 80% true, and that is a lot. What I mean by that is that I struggle with ball position. Now I don’t. The club always feels the same, so you always just sort of start lining up the same all the time. It’s hard to describe, exactly. When my ball position creeps back, I start to get stuck. Now it doesn’t creep back. I grab the club, and the address position feels natural and easy.

Second, I made the mistake of thinking yardage gaps have to be consistent to be useful. They don’t. As my SL set tends towards its extremes, my gaps get larger. My 5 iron isn’t 10 yards behind my 6. But I know how far it is behind my six and I know I hit the center more often, so effectively, because I get much better contact, my gap is much more consistent even though it is smaller.

Third, I learned to hit a hybrid. I play them through 4 iron. I cannot get a SL 4 iron off the ground consistently, but my gaggle of G30 hybrids from the 2nd swing is fantastic.

Fourth, I kept my PM Grind for in and around the green complex.
Fifth, it makes practice MUCH more effective. Swap them out all the time. Hit a 6, hit a SW, hit a 9, hit a 7, rapid fire.

It took me a long time to get used to them, but the two massive pros are the setup/stance and practice. You set up the same way almost instinctively, and that is HUGE. I also feel like I get a ton more out of practice AND that my practice feels like the course a lot more.

There are some drawbacks. I found three specialty shots I had to add clubs at top and bottom to pull off:
1. A short-game only club, like a PM Grind.
2. Where the last SL doesn’t get airborne anymore. I used 3 hybrids below it. They hit middles of greens.
3. Ground balls – I can’t punch out nearly as well with a SL 5 as a CB 3 or 4. I’ve learned to use my driver on this shot.

If you are thinking about something new for irons and have some cash, I would recommend trying SL. It grew on me. I was wrong about it. The key is to stick with it. Just throw them in the bag for two months and when practicing switch up irons constantly – do NOT just bang one iron with an SL set.

Finally, either get fit or play with lie angle a lot. Mine are +3 up, and I’m only 6′. Feel great, dead even dirt line. But since they are all the same, they better be right. Just my thoughts on SL. They’ll be in my bag for the May – Sept. tournaments. I would highly recommend 1. ignoring my earlier posts on them and 2. trying them.”

Here are what a few of our members have said in response to pinestreetgolf’s post, but make sure to check out the entire discussion and have your say at the link below.

  • snowman9000: “Some people get hung up on thinking that they aren’t supposed to have a shorter wedge. I kept one, no big deal. As to hybrids, that’s no biggie either. I mean, it’d be great if we could get good results with 13 clubs the same length, but that’s just not possible. Having SL irons is a huge simplification of the game, regardless of the rest of the bag.”
  • ChrisLC40: “OP I love how you summed everything up. I made the switch a little over two years ago and have made huge improvements. At times I think about going back to variable length irons because of the offerings, but OL is so repeatable, and I feel I may go backwards and need to relearn some things.”
  • LONGBALL777: “Welcome to the Dark Side!”

Entire Thread: “How I learned to stop worrying and love single length irons”

 

Your Reaction?
  • 98
  • LEGIT11
  • WOW1
  • LOL1
  • IDHT1
  • FLOP2
  • OB0
  • SHANK11

Gianni is the Managing Editor at GolfWRX. He can be contacted at [email protected].

7 Comments

7 Comments

  1. retired04

    Apr 27, 2019 at 4:57 pm

    Am 72 and been a single digit since I was 15 (yes, from shorter tees now). As attractive as some of the new club offerings are each year, I am actually afraid to give up my Cobra single length irons (6I-gap wedge). Until your give them an honest try, you will never know the confidence that comes with same ball position, same swing positions, same feel, same overall weight and swing weight(my irons-1/4″ long with extra tape under the 2G white grip-are exactly D2 and +/- 2 grams overall weight through the set). My set is a little odd-F8 one length 8I-Gap and the black TEC one length 6 and 7 (couldn’t stand the goofy “distance” grooves in the F8 6 and 7 irons-one bounced to many over the green with no ball spin-somehow Cobra missed the memo that golf is a point A to point B game with irons). Yes, definitely get fitted for lie angle and you will not believe the difference single length makes.

  2. beachguy

    Apr 27, 2019 at 3:11 pm

    Definitely not a gimmick but not earth-shattering either.
    99.999999% of people aren’t golfing to get on the PGA tour so the key is having fun and people able to strike the ball nicely; seeking perfection is a waste of time.
    If you can’t strike the ball nicely, you need lessons, not OL clubs.
    Once you learn to strike a nice ball, if you work on short game and putting you will have a lot of fun on the course.

  3. Benny

    Apr 27, 2019 at 7:30 am

    Love it and love the idea. Just don’t think I could do it. I will say David’s idea abve is exactly what I have thought about. Most golfers have a hard time with the longer irons. Make they all the same as a 7-6i. You will need their lie’s adjusted but should add to much more consistancy. Does our swing speed really change with a 3i vrs a 7i? Or is it so slight that being closer to the ball is more important?

  4. David

    Apr 26, 2019 at 5:51 pm

    i believe SL irons is slowly gaining traction. its here to stay for a number of people.

    Can someone explain to me why u couldn’t mesh SL iron concept with current config irons. could u have 2-7 irons same length for greater control then step down 8-SW irons per normal. why not have driver 3W same length for grester control. i understand the lie and consistent ball position of the SL irons is different to std length irons of today.

    anyway i think SL irons and observing some of the best tour pro’s who are mixing and matching their clubs so why not us. we can have some fun too playing what we like. yipee for Golf.

  5. Chauncey Gardner

    Apr 26, 2019 at 9:05 am

    I had read of single length irons years before Bryson came on the scene. I had my Cleveland TA-3’ all standardized to my 7 iron. The first thing I noticed was how high I now hit the ball. Distances were about the same. My aching back was alleviated. Negatives are making the adjustments to chipping or pitching. Gotta choke down. Happy I did it after two seasons.

    • Robert Dicks

      Apr 27, 2019 at 12:25 am

      Peter Sellers appreciates the salute, Chauncey.

  6. Ken

    Apr 25, 2019 at 12:18 pm

    Have been playing Wishon Sterlings for 3 years now and I am convert, 5-LW. I do choke down on the GW-LW IF I am hitting a chip or pitch, otherwise same swing, ball position, etc on 3/4 to full shots. No question about it, my ball striking consistency has improved while simplifying any practice I do with irons. Probably not for everyone, but it is also not a “gimmick” that a lot of forum members like to state while bashing the idea on the topic.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Steve Stricker WITB 2024 (April)

Published

on

Driver: Titleist TSR3 (9 degrees, C4 SureFit setting)
Shaft: Fujikura Motore Speeder VC 7.2 X

3-wood: Titleist 915F (13.5 degrees)
Shaft: Mitsubishi Tensei CK Pro White 80 TX

Hybrid: Titleist 816 H1 (17 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 X

Irons: Titleist T200 (3, 4), Titleist T100 (5-9)
Shafts: Project X 6.5

Wedges: Titleist Vokey SM8 (46-10F @55), Titleist Vokey SM10 (54-10S @53), Titleist Vokey SM4 (60 @59)
Shafts: True Temper Dynamic Gold X100 w/Sensicore

Putter: Odyssey White Hot No. 2

Ball: Titleist Pro V1x

Grips: Golf Pride Tour Velvet Grip Rite

Check out more in-hand photos of Steve Stricker’s clubs here.

Your Reaction?
  • 8
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT1
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Whats in the Bag

Alex Fitzpatrick WITB 2024 (April)

Published

on

  • Alex Fitzpatrick what’s in the bag accurate as of the Zurich Classic. 

Driver: Ping G430 LST (10.5 degrees)
Shaft: Fujikura Ventus Black 6 X

3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus TR Black 7 X

Hybrid: Ping G430 (19 degrees)
Shaft: Fujikura Ventus Black HB 10 TX

Irons: Ping iCrossover (2), Titleist T100 (4-PW)
Shafts: Fujikura Ventus Black HB 9 TX (2), Nippon N.S. Pro Modus 3 Tour 120 X (4-9)

Wedges: Titleist Vokey Design SM10 (50-12F, 56-12D, 60-08M)
Shafts: Nippon N.S. Pro Modus 3 Tour 120 X

Putter: Bettinardi SS16 Dass

Grips: Golf Pride MCC

Check out more in-hand photos of Alex Fitzpatrick’s clubs here.

Your Reaction?
  • 2
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

What’s the perfect mini-driver/shaft combo? – GolfWRXers discuss

Published

on

In our forums, our members have been discussing Mini-Drivers and accompanying shafts. WRXer ‘JamesFisher1990’ is about to purchase a BRNR Mini and is torn on what shaft weight to use, and our members have been sharing their thoughts and set ups in our forum.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • PARETO: “New BRNR at 13.5. Took it over to TXG (Club Champ but TXG will always rule) in Calgary for a fit. Took the head down to 12, stuck in a Graphite Design AD at 3 wood length and 60g. Presto- numbers that rivaled my G430Max but with waaaaay tighter dispersion. Win.”
  • driveandputtmachine: “Still playing a MIni 300.  The head was only 208, so I ordered a heavier weight and play it at 3 wood length.  I am playing a Ventus Red 70.   I play 70 grams in my fairways.  I use it mainly to hit draws off the tee.  When I combine me, a driver, and trying to hit a draw it does not work out well most of the time.  So the MIni is for that. As an aside, I have not hit the newest BRNR, but the previous model wasn’t great off the deck.  The 300 Mini is very good off the deck.”
  • JAM01: “Ok, just put the BRNR in the bag along side a QI10 max and a QI10 3 wood. A load of top end redundancy. But, I have several holes at my two home courses where the flight and accuracy of the mini driver helps immensely. Mine is stock Proforce 65 at 13.5, I could see a heavier shaft, but to normal flex, as a nice alternative.”

Entire Thread: “What’s the perfect Mini-Driver/Shaft combo? – GolfWRXers discuss”

Your Reaction?
  • 3
  • LEGIT1
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK4

Continue Reading

WITB

Facebook

Trending