Connect with us

Equipment

Titleist TS4: It’s all about spin

Published

on

Today is the day. Titleist has released the newest addition to the TS lineup; the Titleist TS4 is on tour at the Valero Texas Open now and is slated to hit retail in late June.

What is the TS4 and how does it differ from the TS2 and TS3? Let me give you the in-depth tech details directly from Titleist.

The TS4 is the newest, smallest and lowest spinning member of the TS family of drivers. Designed for a core group of players looking to further reduce spin but maintain the fastest legal ball speeds Titleist has ever achieved. In company testing, the TS4 reduces spin by an average of 300-400 RPM compared to the TS2 and TS3 drivers. All of this while also in a player preferred 430cc package. The appearance from address is a throwback to the traditional pear shape that made Titleist drivers what they are today — but beyond the shape, there is nothing classic about the technology packed into this 430cc titanium weapon.

Utilizing the same speed chassis and ultra-thin crown as other members of the TS family to maximize discretionary weight, the R&D team was able to move the CG (center of gravity) five millimeters closer to the face. Sure five millimeters seems like a small number when maybe talking about a 550-yard par 5, but in the world of golf club engineering, it’s big news and a LOT of movement. As we have seen before, moving CG closer to the face will make the driver lower spinning and a lot more workable.

With the Titleist TS4, you get the same Sure-Fit flat weight adjustability as the Ts2 driver but in a forward configuration, and a .75 degree SureFit hosel.

Now to the inside story.

This driver was five years in the making, dating back to the original 915 D4, which offered the same small footprint and spin reduction BUT as admitted by Titleist — not peak ball speeds that they would have wanted. Not to say the D4 was slow, but it took a real keen player to maximize the club’s potential. What will also be different this time around compared to the D4 is that this is a 100 percent full rollout, including retail.

You will soon be seeing these in shops and available through custom fitting studios, unlike the D4, which was part of an exclusive MOTO (Made Only To Order) program, which made the D4 difficult to add to your arsenal. MOTO was also home to the original 716 T-MB’s, which should be noted, as the club series now has a full-time place in the line up with the 718 T-MB.

Availability

Starting June 27, you will be able to order the TS4 from your local Titleist account and they should be available for fittings a few weeks before that.

Golfers can choose from the same four aftermarket shaft models as TS2 and TS3: Project X EvenFlow T1100 White 65, Project X HZRDUS Smoke Black 60, Mitsubishi Tensei AV Blue 55, and Mitsubishi Kuro Kage Black Dual Core 50.

Update: In-hand photos of Jimmy Walker’s TS4 from the Valero Texas Open

Your Reaction?
  • 302
  • LEGIT31
  • WOW25
  • LOL12
  • IDHT7
  • FLOP8
  • OB6
  • SHANK42

Ryan Barath is a writer & the Digital Content Creation Lead for GolfWRX. He also hosts the "On Spec" Podcast on GolfWRX Radio discussing everything golf, including gear, technology, fitting, and course architecture. He is a club fitter & master club builder who has more than 16 years experience working with golfers of all skill levels, including PGA Tour professionals. He studied business and marketing at the Mohawk College in Hamilton, Ontario, Canada, and is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop in Hamilton and is a member of advisory panels to a select number of golf equipment manufacturers, including True Temper. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, from course architecture to physics, and share his passion for club building, and wedge grinding.

25 Comments

25 Comments

  1. Skeptic

    Apr 25, 2019 at 1:13 pm

    What pear shape? I don’t see it.

  2. Scott Francis

    Apr 20, 2019 at 4:59 pm

    So I dont understand why TItleist doesnt put a weight also in the nack A LA Callaway and Cobra. COuld be a small Triangular weight so if you wanted could move heavier weight back or front. Bad move on their part.

  3. Gunter Eisenberg

    Apr 5, 2019 at 5:02 pm

    Reminds me a lot of the R9 Superdeep.

  4. Bill O.

    Apr 1, 2019 at 8:30 pm

    Been looking for a smaller driver head. Still using a Callaway XR16. Those 460 cc heads just look too big for me. This is great news. I’ll make it work.

  5. Moses

    Apr 1, 2019 at 4:53 pm

    Been there done that with the D4. I don’t need 5 extra yards. I need more fairways

  6. Jack Nash

    Apr 1, 2019 at 4:37 pm

    Still the nicest looking head on the market

  7. jgpl001

    Apr 1, 2019 at 3:57 pm

    Beautiful looking head, but options of a Tensei 65g Blue and a 50g Kuro Kage ?

    What clown put these options together????

    Totally counterproductive

    • F

      Apr 1, 2019 at 4:13 pm

      Because they had loads of shafts left in the warehouse and so they were free

    • Jack Nash

      Apr 1, 2019 at 4:36 pm

      There’s a ton of shafts out there. You could change it yourself. It ain’t that hard. Their testing said those were the shafts with best results. Like they say, your results may vary.

      • Jack Nash Jr.

        Apr 15, 2019 at 3:32 pm

        I guarantee you his results varied.

  8. chad

    Apr 1, 2019 at 3:38 pm

    April fools?

  9. Bob

    Apr 1, 2019 at 3:06 pm

    Is the TS4 only for high swing speeds (100+)? I prefer the smaller head (430cc) with a flexible regular shaft, is that a combo that could work with this head?

    • srooch2

      Apr 1, 2019 at 9:58 pm

      That will work fine, also loft up will help

  10. Ray

    Apr 1, 2019 at 1:08 pm

    Smart move on titleist’s part. They have been known for higher spin compared to TM

  11. C

    Apr 1, 2019 at 10:38 am

    What’s the price?

  12. jason

    Apr 1, 2019 at 10:35 am

    This is weird. Golfers are truly obsessing about low spin. It’s reached a point this year where drivers have become too low spinning for 95% of players. Im a low single digit with 110-112mph clubbed speed and I cannot keep the TS3, FlashSZ, more M5 (all 9-9.5°) in the air. For the first time ever I’ve had to go to 10.5 I drivers, and in the M5 I had to ALSO move the weights back to the tail.

    People need to get back to focusing on 2400 spin. Some guys are trying to get to 1500-1600. That’s not reasonable when you’re launch angle is 14.

    • Foolitsa Prilone

      Apr 1, 2019 at 11:00 am

      Oh Jason…

    • dave

      Apr 1, 2019 at 12:41 pm

      im also right at 112….and i cannot find a shaft head combo to keep the flash sub zero or the f9 below 2700 consistently. even with baby draws….currently on smoke 6.0 tipped an inch. tried atmos black 7s 6x tipped untipped, black tie x, xlr8 x, paderson x, thats in each head reduced to lowest loft…if i hit a slight fade its 3300 275 carry…everyone is different.

      • Jack Nash Jr.

        Apr 15, 2019 at 3:36 pm

        You and Jason should focus on golf and not stats.

        You can get all the numbers just right and still stink.

    • STG

      Apr 1, 2019 at 3:15 pm

      Stop hitting the lower spin heads then Jason. TS2 will work better.

    • Scott Francis

      Apr 17, 2019 at 4:19 pm

      At 110-112 Swing speed which is what Rick Shiels is at you cant keep in the air? Shiels loved the TS3 even moreso than the TS2

  13. Matt A

    Apr 1, 2019 at 10:29 am

    Damnit I JUST bought an Epic Flash to replace my TS2 because that TS2 spun up too much – and I wanted to stick with Titleist.

  14. Travis

    Apr 1, 2019 at 10:07 am

    And 6 months after this the TS 5/6 will be out!

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Honma launches new XP-1 Series driver, fairway woods, and hybrids for 2020

Published

on

new 2020 Honma Driver

For 2020, Honma Golf is launching the all-new XP-1 line of clubs comprised of an entire family holistically designed to help players maximize forgiveness and get the most out of their games with one set. The new Honma XP-1 drivers, fairway woods, and hybrids, all the way to irons, is a new direction for the premium Japanese company that brings together ultimate craftsmanship with performance.

The highlight of the XP-1 line from Honma is the fact that they were designed from top to bottom to work as a comprehensive set of tool to achieve maximum performance. The technology in the metal woods flows from the driver to the hybrids with a seamless transition that creates consistency for feel and looks for the player.

Honma XP-1 driver

new 2020 Honma Driver

New 2020 Honma Golf Driver

Honma is known for its dedication to quality and craftsmanship, and every part of the XP-1 line was developed with the golfer in mind to both look appealing and perform to the highest standards. The XP-1 driver packs a lot of technology into a very classic looking club, and we’re here to take you under the hood—or in this case, the carbon fiber crown—to show you how it can help you hit better shots.

2020 Honma XP1 Driver toe

Honma XP-1 Driver Toe

It starts with a tour-inspired look from address, designed to inspire confidence for any level of golfer. Underneath ther gloss black crown, there is a lot of technology to generate faster ball speeds around the entire face and help get you dialed into the right setting. Speaking to the crown, it’s made from ET-40 fiber, making it one the lightest in golf. This weight savings helps engineers relocate an additional 15g of mass around the head towards the heel for increased MOI and greater ability to help players close the club face more easily.

Flip the driver upside down, and we have a lot more going on with the sole than initially meets the eye. Honma is introducing a new double slot in the sole for increased ball speed across a much larger area of the face. What starts off smaller in the middle increases in width and depth as it reaches towards the heel and the toe of the club. These slots, along with improved MOI, keep ball speeds up and misses closer to the intended target. The last part of the equation: How these wider parts of the face, flex around the more narrow middle to also increase gear effect—think of it like one more way to help the bigger misses stay in play.

New 2020 Honma Driver XP1

2020 Honma XP-1 Driver sole and shaft adjustment connection

The last piece key piece of technology in the XP-1 driver head is exclusive to Honma—the adjustable hosel that changes face angle, lie, and loft, but never changes the orientation of the shaft. This gives the player or fitter the ability to truly dial in hosel settings without having to worry about the constantly changing of the grip orientation. This, according to Honma, also keeps the shaft spine in the ideal location for consistent performance.

Honma 2020 xp1 driver shaft

Honmq Vizard 43g shaft

Honma is the only manufacturer that produces its own shafts from start to finish in house, and the XP-1 is getting its own custom-designed and built shafts to complement the technology built into the heads. The Vizard stock shafts are engineered to produce a smooth feel that promotes faster clubhead speeds, yet also remain extremely stable. For the XP-1 driver, the matching Vizard shafts will come in weights of 43g, 53g, and 63g, and flexes from senior to stiff.

Honma XP-1 fairway woods

The XP-1 woods bring the same level of craftsmanship and technology as the drivers to a club designed for use both off the tee and off the fairway.

New for 2020 Honma XP-1 Fairway wood

New for 2020 Honma XP-1 Fairway wood

The Honma XP-1 3-wood uses the same weight-saving ET-40 crown to position a large amount of the club’s total mass low and on the sole for greatest possible launch and spin consistency. The 3-wood is the second-lightest club in most players bags by total weight and head mass, and unless you are carrying a second driver, it’s also the second-largest by volume. By using the carbon crown designers get everything they can from the other technologies including the double slot sole and thin fast face without having to sacrifice the overall design of not just the head but the entire club.

New Honma XP-1 3 wood crown fairway

Honma XP-1 3 wood crown

The XP-1 fairways also include a 5  7-woods, but with the smaller volume of the heads and the reduced crown size, using a carbon crown would actually increase the mass higher in the head, so they instead utilize an extremely thin high strength steel crown.

New Honma 53g Vizard Fairway Shaft XP1

Honma 53g Vizard Fairway Shaft

All of the fairway woods come with the same made-in-Sakata, Japan 43g, 53g, and 63g Vizard shaft options as the driver to help every player get the most of each club in the set. If might seem like a minor detail, but being able to design an entire club in house from head to grip is a big advantage for Honma versus other OEMs. This holistic approach to designing an entire club/set is a big benefit to the consumer looking to get the most out of each club in their bag and not feel like something may be working against them.

Honma XP-1 hybrid

With the Honma XP-1 hybrid, forgiveness and flow from the fairway woods is the number one consideration for these club. The flow includes a wood-like shape that keeps the club shallow and the center of gravity as low as possible for higher launch and approach shots that fly higher and land softer. Considering the target player for the XP-1 line, the wood-like shape is also very confidence-inspiring.

New 2020 Honma XP1 hybrid

Honma XP-1 Hybrid

Honma continues the design philosophy of keeping the XP-1 both forgiving and fast by utilizing the double slot sole all the way into these hybrids that go from a 19-degree 3-iron replacement to a 25-degree 5-iron replacement.

Honma XP-1 specs & availability

The Honma XP-1 driver, fairway wood, and hybrids will be available starting in October.

New 2020 Honma XP1 Driver fairway hybrid specs

Honma XP-1 line club specs

Your Reaction?
  • 12
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

2020 Honma XP-1 Irons, featuring “fast” hybrid construction, launch

Published

on

Honma XP-1 Irons

Honma has unveiled its game improvement 2020 Honma XP-1 irons which feature a hybrid construction with low CGs and fast faces in the new 2020 Honma irons.

The XP-1 long irons (4-7 iron) are hollow and contain a tungsten sole weight in a bid to offer both higher launch and added stability on mis-hits. The short irons (8-SW) feature a cavity back construction and are designed for maximum forgiveness as well as providing straighter distance.

2020 Honma XP-1 Irons

The long irons also contain a wide sole which seeks to add forgiveness and also offer game improvement golfers greater turf interaction.

Honma XP-1 Irons

The XP-1’s, which are crafted in Sakata, Japan, feature a large profile with a traditional shape, with a thin face designed to maximize ball speed for greater distance.

Honma XP-1 Irons

Speaking on the release of the company’s entire XP-1 range release, Honma’s Vice President of Global Product, Chris McGinley stated

“We are thrilled to bring the many decades of club-making knowledge and shaping talent of Honma’s master craftsmen to game-improvement golfers with XP1. This product line is incredibly beautiful and exceptionally playable and will help golfers with a wide range of skill levels enjoy the game even more.”

Honma XP-1 Irons

The new additions from Honma come equipped with the brand’s VIZARD shafts. The shafts contain an ascending weight flow design and a graphite fiber in the tip, which, according to the company, helps to provide faster swing speeds.

Honma XP-1 Irons

2020 Honma XP-1 iron specs

Honma XP-1 IronsThe XP-1 irons, which arrive in both men’s and women’s models, are available in-store and online from the beginning of October and cost $199.99 and $174.99 per club for graphite and steel shafts, respectively.

Your Reaction?
  • 11
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Forum Thread of the Day: “Scotty Cameron Teryllium TFB-1.5 (stainless) putter”

Published

on

Today’s Forum Thread of the Day showcases Scotty Cameron’s Teryllium TFB-1.5 (stainless) putter. Our members have been mightily impressed by the flat-stick, with the finish proving to be a massive hit with WRXers.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say on the putter at the link below.

  • ASN21: “Beautiful putter!”
  • WillyL: “That would go well with my black one!!”
  • deep18: “Yes please. Daddy like.”
  • noodle3872: “I typically gravitate to black finishes on putters, but the stainless looks amazing! The insert looks slick with a bit of shine to it as well.”

Entire Thread: “Scotty Cameron Teryllium TFB-1.5 (stainless) putter”

Your Reaction?
  • 30
  • LEGIT1
  • WOW1
  • LOL1
  • IDHT2
  • FLOP1
  • OB1
  • SHANK14

Continue Reading

19th Hole

Facebook

Trending