Club Building 101: Pulling a shaft from a bonded driver
Even though most modern drivers have some sort of adapter, there are still many times when you have to pull a shaft from a fully bonded head whether it be a driver, fairway wood, or hybrid. With bonded heads, you have to be careful with a few things including using the right amount of heat, where to focus it, and properly using your tools.
- LIKE11
- LEGIT1
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK14
- Rasmus Højgaard what’s in the bag accurate as of the Zurich Classic.
Driver: Callaway Ai Smoke Triple Diamond (10.5 degrees)
Shaft: Mitsubishi Tensei 1K Blue 60 TX
3-wood: Callaway Ai Smoke Triple Diamond Prototype (16.5 degrees)
Shaft: Mitsubishi Tensei 1K White 80 TX
Utility: Callaway Apex UW (21 degrees)
Shaft: Mitsubishi Tensei AV Raw White 85 TX
Irons: Callaway Apex Pro (3), Callaway X Forged (4-PW)
Shafts: KBS $-Taper 130
Wedges: Callaway Jaws Raw (52-10S, 56-10S, 60-06C)
Shafts: KBS Tour 130 X
Putter: Odyssey Ai One Milled Eight T DB
Grips: Golf Pride MCC
Check out more in-hand photos of Hojgaard in the forums.
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
- Rory McIlroy what’s in the bag accurate as of the Zurich Classic.
Driver: TaylorMade Qi10 (9 degrees)
Shaft: Fujikura Ventus Black 6 X
3-wood: TaylorMade Qi10 (15 degrees)
Shaft: Fujikura Ventus Black 8 X
5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Fujikura Ventus Black 9 X
Irons: TaylorMade Proto (4), TaylorMade Rors Proto (5-9)
Shaft: Project X 7.0 (4-9)
Wedges: TaylorMade MG4 (46-09SB, 50-09SB, 54-11SB), Titleist Vokey Design WedgeWorks (58-K @59)
Shafts: Project X 6.5 (46-54), Project X 6.5 Wedge (60)
Putter: TaylorMade Spider Tour X3
Grip: SuperStroke Zenergy Pistol Tour
Ball: 2024 TaylorMade TP5x
Grips: Golf Pride MCC
Check out more in-hand photos of Rory McIlroy’s WITB in the forums.
- LIKE2
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK1
Ping PLD putters have been a very common site on profesional tours. Pros seem to gravitate toward the PLD line’s custom options and precision milling. We have seen the PLD line expanded over the years, but we haven’t seen too many, if any, large mallets.
This week we spotted a PLD putter in Nate Lashley’s bag that has a similar look to the old Ping Wolverine head shape. This putter is a large mallet with the famous “claws” on the outside and oval center that housed the alignment aid.
Nick’s putter has the PLD logo on the back but also looks like it might have an insert installed on the face. It is hard to tell but at the address picture, it looks like the face is a lighter material than the rest of the putters. The putter is center-shafted and should be face-balanced with a high MOI for stability and forgiveness on mishits. The sole is completely milled and has no markings of name or technologies that might be present in the head. A single white site line is on the top of the putter for alignment.
Nick’s putter is finished off with a chrome steel shaft and a Super Stroke Zenergy Flatso 2.0 grip in black and white.
- Check out the rest of our photos from the 2024 Zurich Classic
- LIKE0
- LEGIT0
- WOW0
- LOL0
- IDHT0
- FLOP0
- OB0
- SHANK0
-
19th Hole2 weeks agoDave Portnoy places monstrous outright bet for the 2024 Masters
-
19th Hole2 weeks agoTiger Woods arrives at 2024 Masters equipped with a putter that may surprise you
-
19th Hole1 day ago‘Absolutely crazy’ – Major champ lays into Patrick Cantlay over his decision on final hole of RBC Heritage
-
19th Hole3 weeks agoReport: Tiger Woods has ‘eliminated sex’ in preparation for the 2024 Masters
-
19th Hole1 week agoTwo star names reportedly blanked Jon Rahm all week at the Masters
-
19th Hole1 week agoReport: LIV Golf identifies latest star name they hope to sign to breakaway tour
-
19th Hole1 week agoNeal Shipley presser ends in awkward fashion after reporter claims Tiger handed him note on 8th fairway
-
19th Hole1 day agoJustin Thomas on the equipment choice of Scottie Scheffler that he thinks is ‘weird’
Ryan Michael
Mar 10, 2019 at 12:27 pm
It’s 2019 how about successfully pulling an adapter from a shaft! Many would be surprised at how precise you need to be in pulling it out perfectly straight to protect the shaft fibers on top of applying the heat just right. Not an easy job!
Gunter Eisenberg
Mar 9, 2019 at 12:38 pm
Shaft pulling from Woods is becoming a lost art because of the adjustable adapters.
2putttom
Mar 9, 2019 at 11:45 am
outstanding job. Make me wanna buy a new puller.
Tim S
Mar 9, 2019 at 10:58 am
Would be really cool if you did bore thru removal….Callaway, Titleist 905 and 906 series. Bore thru us much more intriguing. Good video though.
MollyDooker
Mar 9, 2019 at 10:29 am
Removing a shaft because the ferrule didn’t fit correctly. LOL. Now I know I’m not the only one. Thanks!
Tom
Mar 20, 2019 at 9:42 am
Why not just buff the ferrule enough to be even with the club hosel?
Merde
Mar 9, 2019 at 9:24 am
Seriously can we get rid of this guy
He’s not fit to be talking
Rod C
Mar 10, 2019 at 3:43 pm
Another tiresome comment of no constructive value at all! Frankly, I found the video informative and useful and that’s what matters. Let me ask you this, what have you done to help others or do you just criticise?