Equipment

Danny Lee’s Mizuno MP-32 irons: The real inside scoop!

Published

5 years ago

Feb 20, 2019

Hipsters are known for loving “old” stuff — you know the classics, the vintage, the retro. From vinyl, to thrift store sweaters, what’s old is new again. In the case of Danny Lee, he’s leading the charge as the PGA Tour’s iron hipster.

It should also be noted that “old” is a relative term, especially with golf equipment. Now when it comes to “classics,” Mizuno has produced some of the most recognizable irons of all time, including the Cut Muscle MP-32 released in 2004.

We recently spotted Danny Lee at the Genesis Open and it started a LOT of discussion about classic designs, as well as whether these are new old stock (NOS) or new forgings, using the original tooling.

I reached out to Mizuno’s Senior Club Engineer Chris Voshall to get to the bottom of this interesting iron development. (Plus the idea that Mizuno has sets of 10-plus year-old irons kicking around ready for custom builds — I have a huge smile thinking about what that storage room might look like — is a pretty fun thought).

Heres the inside scoop on Danny’s irons from Chris Voshall

“The MP-32s being played by Danny Lee are a new old stock set that came from Luke Donald’s personal stash inside the tour van. The ones Danny is playing are the very last set of custom grind 32s that were made for Luke.”

(HERES WHERE THE STORY GETS VERY INTERESTING)

“Here’s the part that makes the Danny’s set unique – During final development of the 32s, Luke was feeling that the soles for him were not getting through the turf the same as his previous MP-33s, but he loved the profile and extra forgiveness offered by the cut muscle design.

“By working with the Craftsman on the Mizuno team they created a unique sole profile for Luke that modernized that of the MP-33 for his new MP-32s. They rounded off and beveled the trailing edge of the 32s and had multiple sets made that he used during their entire run in the line.

“The tell tale of the Luke soled irons vs. the retail and standard version is how close the trailing edge of the sole is to the “Mizuno” on the back. What’s even more interesting about the development of that sole and grind is that every MP iron moving forward in the line starting with the MP-62 in 2008 utilized the exact sole profile of the one developed with Luke for the 32s and then 62s he used to become Number 1 player in the world.”

Below are comparison pics of Danny’s irons vs retail MP-32s and MP-62s

Danny Lee’s LD Grind 32s

Standard MP-32 7-iron – notice the amount of space above the “Mizuno” text

Right – MP-62 vs Standard MP-32

Danny Lees LD Grind 9-iron

Retail MP-32 9-iron

MP-62 9-iron vs retail MP-32

WOW! How cool is that insider information? True 14-year-old prototypes back in play on Tour! Now we know 100 percent the real story behind this very cool set and how it lead to historical Mizuno design changes that we still see in the MP line today!

NOTE: All Mizuno forged irons pre-2010 meet the 2010 USGA Conforming Groove rule; they were conforming before and are still conforming now. This is also part of the reason you don’t see many other classic irons on tour, except for maybe some from Ping which did do a few older models with new grooves –most notably D.A Points’ i5s irons.

Your Reaction?

LIKE533
LEGIT47
WOW32
LOL7
IDHT5
FLOP3
OB4
SHANK8

Related Topics:featured

Up Next

Abraham Ancer becomes Miura’s first PGA Tour ambassador

Don't Miss

Forum Thread of the Day: “Most forgiving players iron made within the past 5 years?”

Ryan Barath

Ryan Barath is a club-fitter & master club builder with more than 17 years of experience working with golfers of all skill levels, including PGA Tour players. He is the former Build Shop Manager & Social Media Coordinator for Modern Golf. He now works independently from his home shop and is a member of advisory panels to a select number of golf equipment manufacturers. You can find Ryan on Twitter and Instagram where he's always willing to chat golf, and share his passion for club building, course architecture and wedge grinding.

24 Comments

Larry Hesselrode

Nov 30, 2021 at 9:23 am

Bought MP32 then blew my knee out put them in storage for 17 years. Just tried them out. What a Club! I wouldn’t sell them now they’re priceless and still looks brand new even the grips are still good.

Reply Report comment
Matt

Jul 29, 2019 at 2:10 am

MP-32’s are still in my bag after all these years – Perfect irons

Reply Report comment
Simms

Mar 20, 2019 at 3:44 pm

I think the only problems these companies have re-introducing older models is it only works for a very small amount of the club buyer’s (no Profit) plus it does detect from some of the power of being able to advertise all the improvements in the newer clubs. There are some older clubs out there that have held up to the best the R&D’s have come up with lately…one would be the Callaway steelhead fairway woods they brought back.

Reply Report comment
Jim Hayes

Mar 11, 2019 at 3:36 pm

Love my MP-32’s. Best irons I’ve ever played. Truly incredible distance control. High flight stops quickly on most greens. If they would ever bring out he MP-32’s again i’d Buy several sets. They are simply the BEST.

Reply Report comment
Bill

Mar 10, 2019 at 12:51 pm

I am STILL playing my MP32 irons (left handed set!) They soft and very workable!! BUT, I did lose 1 club length on them. they are worn and I am ready for a new set ( Francisco Molinari’s set up is just about what I want).

I was playing the HOGAN APEX FTX set! I really loved playing both sets,but, if you gave me only a choice of one of them, it would be the FTX set. They were soft, workable AND had a thin top line, a PERFECT muscle back with a true players iron look, not too much offset and the 8 to wedge were Blades!! A real combo set designed as one set. The best part — They were LONG!!

To anyone who would really like a great players iron set, If you could find a set, used but very good condition, these would be great, at a very reasonable price.

Note: these are square grooved, old PGA rules(they may not be legal on high level tourney)
and I did replace to shafts with Dynamic gold x100.

Reply Report comment
- MBU
  
  Mar 29, 2019 at 4:03 am
  
  I lusted after Hogans before they made them left handed, and i bought the FTX’s when they came out. I didnt appreciate them at first, it was after a 6 year lay off. But now, having bought other irons, nothing feft softer or better when struck properly. I still have them, and use them occasionally.
  I may just put the 8,9,pw back in my bag…
  
  Reply Report comment
CJ

Mar 4, 2019 at 7:27 pm

Those irons are gorgeous oh my. That grind would be a hot commodity if they came to retail I think

Reply Report comment
Jeff Spain

Mar 4, 2019 at 10:06 am

I’m 67 years young have played Mizuno MP 33 for years . I bought a custom set of Titliest AP-1 thinking I needed more forgiveness “old man clubs”, they felt like Nothing, no feedback at all. I reshafted my 33’s with Nippon pro 850gh for lighter slower swing. It’s like hookling up with your high school sweetheart, Love Them Again

Reply Report comment
Jake

Feb 22, 2019 at 1:36 pm

I might be just reminiscing, but the MP-32 sure looks a lot like the Wilson Staff ‘Tour Blade’ irons I bought in th mid-1970’s and played through the 80’s. Those irons had a really sweet feel.

Reply Report comment
Mario

Feb 22, 2019 at 1:22 pm

Best looking irons ever. Easier to hit, shape the ball like a MB, beautiful to look at

Reply Report comment
jgpl001

Feb 21, 2019 at 3:38 pm

I absolutely loved mine many years ago and could still bag them now

They had enough forgiveness to be really playable and they felt brilliant

One of the best irons of the past 20 years

Reply Report comment
Anthony Parham

Feb 21, 2019 at 1:03 pm

I have a set of MP 32s and I love them, I did the same thing they did for Luke on my short irons and they play great.

Reply Report comment
Scott

Feb 21, 2019 at 10:29 am

What about the grove change since 2004? Are the old groves grandfathered (i.e. Ping clubs)?

Reply Report comment
Roger

Feb 21, 2019 at 10:01 am

Did Chris Voshall make any comment if remaking the MP32’s (or updated version) could be produced in the future?

Reply Report comment
Michael Buell

Feb 21, 2019 at 7:39 am

I recently went back to the T zoid after trying newer Mizunos and Taylormades. I first regriped my old set then found a mint, almost unhit set on eBay. My game has improved.

Reply Report comment
Rory O Donnell

Feb 21, 2019 at 2:20 am

What’s with Mizuno releasing ‘blades’ with thick top lines – bring back the MP33 iron. It has been their best iron ever.

Reply Report comment
James

Feb 21, 2019 at 1:20 am

What does the writer mean about pre 2010 clubs conforming to post 2010 rules? Is he saying that some pre 2010 club don’t conform today?

Reply Report comment
MW

Feb 20, 2019 at 11:42 pm

I have 6 sets of MP-32s. The look, the feel, the performance in my opinion has never been matched.

Reply Report comment
Sean Fennessy

Feb 20, 2019 at 10:27 pm

Are the MP-54s any good ?

Reply Report comment
- John Hennessey
  
  Feb 23, 2019 at 12:06 am
  
  I still play with the mp-54s, recently saw 4-people for sale at A$500 in Sydney. They are not long, but oh so accurate. I play of 12, so good for mid handicappers. Grab a set if you get the chance, just be prepared to hit an 8 iron when others might smash a wedge.
  
  Reply Report comment
Liongolfer

Feb 20, 2019 at 10:02 pm

Interesting. Never donned on me that heel relief will help that much with turf interaction. I’ve always focussed on leading edge, toe and heel relief. The tour mp32s look much nicer than the already nice retail MP32s… don’t reintroduce these…let the cult classic status grow.

Reply Report comment

Cancel reply

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

21 hours ago

Apr 17, 2024

Andrew Tursky

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

View this post on Instagram

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?

LIKE21
LEGIT1
WOW0
LOL1
IDHT0
FLOP0
OB1
SHANK3

Equipment

Spotted: TaylorMade P-UDI driving iron

Published

22 hours ago

Apr 17, 2024

Brian Knudson

It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.

We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.

From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.

“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.

TaylorMade P-UDI 3-iron – 20°

TaylorMade P-UDI 4-iron – 22°

Check out the rest of our photos from the 2024 RBC Heritage

Your Reaction?

LIKE13
LEGIT1
WOW3
LOL0
IDHT0
FLOP1
OB0
SHANK1

Whats in the Bag

Collin Morikawa WITB 2024 (April)

Published

22 hours ago

Apr 17, 2024

GolfWRX Staff

Collin Morikawa what’s in the bag accurate as of the RBC Heritage. More photos from the event here.

Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)

3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Check out more in-hand photos Collin Morikawa’s clubs here.

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)