Connect with us

Equipment

SPOTTED: 2019 Aldila shafts

Published

on

aldila-2019-shafts

With the beginning of the PGA Tour’s West Coast swing on now, we are really starting to see more 2019 gear work it way onto tour trucks, and onto the range for player testing…and into our forums (in picture format, at least).

Some of the most recently spotted pieces are the 2019 Aldila ATX shafts, including what appears to be an 85g hybrid shaft and a 120g iron shaft.

aldila-2019-shafts

We can only speculate that the hybrid is a low launch shaft — based on the PGA  Tour testing being done, but this could be a shaft more suited for the growing popularity of the driving iron category vs. wood-like hybrids in the previous couple of seasons.

The 120g iron shaft has a lot of people talking, since Aldila has leaked some information in our picture thread

“It utilizes a custom prepreg made at our facility in Poway that features a “Metal Mesh” material that is combined with Carbon Fiber to help add stability and weight in the irons.”

aldila-metal-mesh

By using this custom material, Aldila could be solving the common problem that a lot of people have with graphite, and that is the club total weight — although in this case 120g is similar to a lot of steel iron shafts already being used on Tour. As prototyping goes, this material could be put to use in lighter versions of the shaft and have a greater benefit in the sub-100g category — if they plan on going that route.

For the drivers, if previous versions and colorways are any indication, it looks like we will have some new technology packed into popular bend profiles like the NV (Green) and the VS (Blue).  As some members on the forums have already discussed, these shafts will be utilizing graphene (an extremely strong carbon material) for additional stability. 

We also have new Rogue 130 MSI models following along similar lines with both a black and silver.

Here’s some additional information from Aldila

“Building off of the success of the ROGUE® Limited Edition – which featured 125 M.S.I. Graphitic Carbon Fiber, we have taken ROGUE® to performance to another level by incorporating even stronger 130 M.S.I. Graphitic Carbon Fiber. The ROGUE® Silver 130 M.S.I. is a low-launch, low-spin shaft with a low torque tip-section fortified with 130 M.S.I. Graphitic Carbon Fiber, a higher balance point, and a premium ion plated finish.”

Join the discussion in our forums

Your Reaction?
  • 36
  • LEGIT0
  • WOW4
  • LOL1
  • IDHT0
  • FLOP0
  • OB1
  • SHANK3

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

2 Comments

2 Comments

  1. Ripit

    Jan 17, 2019 at 9:15 pm

    Bring back the Red Eyes Alpha RIP pleeeeeeeeeease but in a new version! With the Graphene! Same weights would be nice though

  2. BIG G

    Jan 17, 2019 at 6:13 pm

    A 120g Aldila graphite iron shaft???? Yes please!!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

WRX Spotted: A pair of custom putters

Published

on

This week’s Zurich Classic is all about pairs — that goes for the two-man teams competing for the winner’s check(s), and in the case of notable putters we spotted, a pair of new one-off customs in bags this week: Abraham Ancer’s personal Bettinardi and Danny Lee’s new Scotty Cameron Super Rat.

Let’s start with the Danny Lee’s because there is a LOT going on with that club including first and foremost – it’s one nasty wand:

  • Super Rat head shape with a single sight line
  • The milled (actual) loft appears to be pretty standard for Cameron Putters
  • The hosel has been bent to accommodate Danny’s “armlock” style. This keeps the loft of the head where it should be while forward pressing. This kind of adjustment would need to be made to any standard putter if you were to try the armlock, or else you would deliver negative loft at impact
  • The shaft is LA Golf Shaft OZIK TP — a shaft designed to remove undesirable vibration through the shaft, while also reducing putter head oscillation at impact. Not a surprise considering the number of multi material/graphite putter shafts that are available right now to help improve consistency.
  • Last but not least a SuperStroke Flatso grip installed with the flat part of the grip aligned parallel to the putter face! This isn’t the first time we’ve seen something like this, and it makes sense – Utilizing the orientation of the grip to create greater awareness of the face angle can help players of all skill levels create more consistent results, even tour pros.

Danny has had an interesting golf bag to follow this season with a number of changes coming almost weekly from irons to putters. Maybe this change could help turn his putting around (currently ranked 116th in strokes gained: putting), all while still being inside the top 50 in the FedEx Cup.

Now to Abraham Ancer’s new Custom DASS BBZero Tour Dept. Putter.

  • This putter is based off of the BBZerostyle head with rounded bumpers and a plumbers neck
  • Compared to the BBZero though, the heel is thicker and it could have a slightly shorter blade length (TBD)
  • It has a recessed sight line on the top that runs perpendicular to the sight line in the flange to form a “T.” This is interesting for a couple of reasons including that it looks to be the width of a golf ball, which could help Abraham find the center better. Also as a right-handed golfer, this type of alignment is an indication that he is most likely right-eye dominant and uses the face of the putter to align to the target as much if not more than the flange line.
  • Just like Danny’s above, this putter is also shafted with the LA Golf Shaft OZIK TP — there must be something about that that has more players testing it out.
  • And finally, the grip is the SuperStroke Claw. Judging by the cleanliness of both these grips these are both new to the players and testing will prove what ends up come tournament time.

Your Reaction?
  • 4
  • LEGIT2
  • WOW1
  • LOL2
  • IDHT0
  • FLOP1
  • OB2
  • SHANK8

Continue Reading

Equipment

Forum Thread of the Day: “Iron type for controlling shots into the wind?”

Published

on

Today’s Forum Thread of the Day comes from eckmanjp who is on the hunt for irons to help with controlling shots played into the wind. Our members give their opinions on what are the best options for eckmanjp, with plenty of different clubs and shafts recommended.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • driveandputtmachine: “Into the wind, spin is NOT your friend. No matter how low launching it will balloon. I was an extremely high spin player, in my search for something lower spinning my three best were…. TM P 790, Cobra Forged TEC, and Ping i500.The final piece is a shaft that spins high enough to hold greens, but not too high to balloon into the wind.”
  • mogc60: “Sounds like you have good clubs and shaft combo for reducing spin. Shafts do make a difference…but don’t cure the upshoot into the wind. Good advice above about more club and swinging slower…speed equals spin. I find the biggest mistake people make into the wind is playing the ball too far back and hitting down too hard. The key is smooth through impact and finishing low in your follow through…not pounding it down…that creates that upshooting shot that the wind destroys.”
  • dpb5031: “Technique plays the major role here, not equipment. Generally, anywhere from 1 to 3 extra club, grip down on the handle, and use what I call a wide-to-wide swing at 3/4 speed. Think limited arm swing (no longer than left arm parallel with the ground in BS) and then cover the ball, keep body turning through it, and finish wide & low, with handle following your rotating trunk around to the left.”
  • rxk9fan: “I think the head/shaft combo can make a huge difference of course along with how you deliver the clubhead into the ball. Take a look at the Titleist shaft chart and see what they are showing. FWIW though, the OP’s current shaft should not be a high launch/high spin shaft. I found both the 716 AP2 and CB to be tough to control spin with, but as suggested it was 100% my delivery at impact. I found the Srixon Z9xx series to spin less but the best thing I did was get to a quality teacher, and we improved a pretty tiny swing flaw that had a big impact on spin. Good luck. I can say I tried to “new club” my way through the spin problem, but three lessons is what it took to fix it.”

Entire Thread: “Iron type for controlling shots into the wind?”

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

WRX Spotlight: Dead Zero Putting Disk Pro

Published

on

Product: Dead Zero Putting Disk Pro

Pitch: From Dead Zero: “The new Dead Zero Pro model putting disk offers golfers the ability to accurately determine green slope and a true fall line when practicing their “money” putts thanks to a bubble level embedded into the top of the disk. The bubble level accurately measures up to six-degrees of slope and gives a true reading of the fall line on any area of the putting surface. Like the Original model, the Dead Zero Pro helps all golfers build confidence to make more putts inside eight to ten feet.”

Our take on the Dead Zero Putting Disk Pro

The Dead Zero Pro Putting Disk Pro improves upon the original design by incorporating player and instructor feedback to include a level in the top of the disk. It’s a wise addition to a device that already offers players aid in an important practice approach: putting to a target smaller than the 4.25-inch cup. (The disk is roughly half the size)

We tried the Dead Zero Putting Disk Pro in the manner creator Eric Schmitt suggests in the video below.

We found it easier to focus on putting to a smaller target when using the device–the fact that the disk looks like a target certainly doesn’t hurt this! It’s also easier to practice breaking putts with the Dead Zero Putting Disk.

The level function helps quickly get an accurate feel for the putt, and you can set the disk down where the hole effectively “is,” from an aiming standpoint, on, say, an eight-footer that breaks six inches right to left.

It’s also a nice tool to have in your bag any time you need a target in practice, really, and are struggling to visualize a line or landing area. For example, when pitching from around the green.

Ultimately, this is a good practice and practice round tool that nicely functions as a smaller-than-a-golf-hole target for putting, a level, and an easy-to-see target.

A final word: There is something to the fact that golfers, particularly those who struggle with their putting, get hung up on aiming at a portion of the hole, “three balls out,” etc. If the cup has started to look more like foe than friend, shaking things up with a device like the Dead Zero Putting disk is recommended.

  • More photos of/discussion about the Dead Zero Putting Disk Pro in the forums. 
Your Reaction?
  • 13
  • LEGIT4
  • WOW4
  • LOL5
  • IDHT2
  • FLOP5
  • OB3
  • SHANK37

Continue Reading

19th Hole

Facebook

Trending