Connect with us

Equipment

Forum Thread of the Day: “Best Mizuno blades?”

Published

on

Today’s Forum Thread of the Day comes from hypergolf, who asks fellow GolfWRX members for their view on which Mizuno blades are the best on the market. The MP4’s may currently be edging it, but our members are keen on a variety of different options from Mizuno.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • Warrick: “4’s feel. 5’s forgiveness. 18’s looks. I have not played older Mizzy blades.”
  • Sir edward of putternut: “MP14 and MP29 are the boobs. MP5 is my gamer. Mp33 is fantastic as well. I like them more than the MP4.”
  • Andyman234: “I love my MP18 MMCs. I would highly recommend hitting them first though. Maybe you can find them new somewhere and demo them before purchasing them used.”
  • dark : “Picked up a set of MP-68s recently with ProjectX 5.5 shafts. So good, they kicked my MP-14s to the curb”

Entire Thread: “Best Mizuno Blades?”

Your Reaction?
  • 35
  • LEGIT3
  • WOW2
  • LOL0
  • IDHT0
  • FLOP4
  • OB1
  • SHANK6

Gianni is a freelance writer. He holds a Bachelor of Arts as well as a Diploma in Sports Journalism. He can be contacted at gmagliocco@outlook.com. Follow him on Twitter @giannimosquito

16 Comments

16 Comments

  1. DaveJ

    Jan 9, 2019 at 9:24 am

    IMO, the MP33s are the benchmark by which all blades should be measured. They are about as close to a pure blade experience as you can get. They feel great, flight effortlessly, and can be worked left or right as much as your skill allows. I sadly had to stop playing mine as I got older and started getting arthritis in my hands and wrists. I think the 2 iron was the most fun club to hit of the set. Pure one off the tee and it fell like you were swinging a hammer at a marshmallow.

    The MP32s are my favorite “modern” blades. I would be gaming them if I were to magically go back to my early 20s.

    • Tommy Roberts

      Jan 9, 2019 at 10:35 pm

      Faldo’s TP 19’s cannot be beaten. Well maybe, but they are incredible blades. Have a completely new redone set in case anyone wants them. X100’s, never hit, in wooden case, I cannot even open. Will take 5 min to do so !

  2. koober

    Jan 7, 2019 at 5:36 pm

    My MP-60’s are over a decade old now, but I always go back to them. I know they’re not strictly blades, but these muscle-backs are so pure. Also have the stock R300 shafts in them. If anything, I’ll probably just upgrade the shafts. Heads are still fantastic. (No rock balls.)

  3. chad

    Jan 7, 2019 at 1:45 pm

    EVERYONE knows the mp32s were the best irons they ever made

  4. William Davis

    Jan 7, 2019 at 12:14 pm

    TP9 – bought perhaps last set in UK back in ?. Take out now and again and still pleasing. MP30 going strong. Went to JPX850 but no great improvement.

  5. Jack Nash

    Jan 7, 2019 at 12:12 pm

    Still to me some of the most beautiful irons produced.

  6. Jack Baker

    Jan 6, 2019 at 9:30 pm

    Jpx 900 are the best I have played but I have hit a bunch of them. Silver Cup blades were the absolute softest ever, sweet.

  7. Brad

    Jan 6, 2019 at 8:52 pm

    MP-68s and MP-5s have been the best Mizuno blades I’ve used. MP-18s are very nice as well, but I felt the MP-5s were still better in the feel and forgiveness categories.

  8. ACTUAL FACTS

    Jan 6, 2019 at 5:41 pm

    All of Mizuno’s blade models over the last two and a half decades have been sauce! I could bag the MP-14s just as quickly as my current irons. TN87, MP9, MP11, MP14, MP29, MP33, MP37, MP68, MP4, MP5, MP18…they’re all great!!!

    • s

      Jan 14, 2019 at 8:09 pm

      Couldnt agree more. i would pick MP-14 first too. Personally not a huge fan of those pseudo cavities and the new run bird(?) logo though…

  9. The dude

    Jan 5, 2019 at 9:39 pm

    MP 11……if yer good enough……TN 87 2nd….

  10. smz

    Jan 4, 2019 at 8:19 pm

    The magic is in the metallurgy and grain flow forging method that forges the complete clubhead, hosel included…. no ‘spin welding’ the hosel to the blade like miura foists on gullible golfers.

  11. 37

    Jan 4, 2019 at 4:55 pm

    37
    Not as rounded as the 33, a bit sharper and boxier and a tad more sexier

  12. TigerFan91

    Jan 4, 2019 at 3:08 pm

    I like my MP69s. They don’t even have a fancy shaft on them…just your standard X100s. They’re not that intimidating at address and they feel great.

    • toyzrx

      Jan 4, 2019 at 7:31 pm

      Yes I agree. Just the stock DGS300 in them and they are as good as any new ones on the market.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

TaylorMade signs Matthew Wolff to a multi-year deal; Wolff WITB

Published

on

TaylorMade Golf has officially announced the signing of Matthew Wolff on a multi-year agreement that will see the 20-year-old play the company’s metal woods, irons, wedges, putter and ultimately, TaylorMade’s flagship golf ball, the TP5x.

Wolff had previously unveiled that he would be making his professional debut at this week’s Travelers Championship, and just as top prospect Collin Morikawa did earlier at this month’s Canadian Open, Wolff will do so as a TaylorMade staffer.

The NCAA All-American and 2019 NCAA Division I individual champion made his debut on the PGA Tour at the Waste Management Phoenix Open earlier this year where he finished T50 after opening his week with a round of five-under par.

Matthew Wolff WITB

Driver: TaylorMade M6 (8 degrees)
Shaft: Graphite Design TP 7TX

Fairway Wood: TaylorMade M6 (15 degrees)
Shaft: Project X HZRDUS Smoke 6.5 TX

Utility Iron: TaylorMade P760 (2)
Shaft: Nippon Modus 130x

Irons: TaylorMade P750 Tour Proto (3-PW)
Shafts: Nippon Modus 130x

Wedges: TaylorMade Milled Grind Raw (52, 56, 62 degrees)
Shaft: True Temper Dynamic Gold X100

Putter: TaylorMade Spider X Copper

 

Your Reaction?
  • 14
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

8 interesting putter photos from Bettinardi’s Summer Social

Published

on

Bettinardi’s annual Summer Social was held at company HQ in Tinley Park, Illinois, last week. For RJB enthusiasts from as far away as London and Japan, it’s an opportunity to get together with like-minded individuals, shoot the breeze, oh, and check out some of the coolest putters in the world.

For those of us not lucky enough to join Bob, Sam, and the 60-plus collectors in attendance, Bettinardi was kind enough to furnish us with a few photos of the one-off and limited-edition flatsticks featured at the 10th edition of the gathering.

DASS BBZero Sound Slot Wizard Ghost Face

DASS 3 Step Jam Fancy Neck Tie Dye

DASS SS38 Fancy Face

DASS BB8 Mid Sound Slot

Carbon Fred Couples Blade Fancy Neck

Raw Fred Couples Blade

DASS QB6 Mid-Slant Chitown Dog

DASS QB6 Gold Flame

Your Reaction?
  • 6
  • LEGIT1
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK3

Continue Reading

Equipment

WRX Spotlight: Argolf Mordred putter

Published

on

Product: Argolf Mordred putter

Pitch: From Argolf: “…each ARGOLF putter is named after an Arthurian legend.”

“Mordred was known as a notorious traitor who fought King Arthur at the Battle of Camlann, where he was killed, and Arthur was fatally wounded. The images depicting Mordred are reflected in the winged design of the putter which aids in stabilization and alignment, as well as its coloring.”

“With a lower center of gravity that surpasses all mallet putters in the ARGOLF collection, Mordred boasts one of the highest MOIs available on the market. Precisely milled from a solid block of aeronautical-grade 7175 Aluminum, Mordred appeals to the eye with its clean and sophisticated look. Using the most advanced technology, Mordred is shaped through a 5-axis milling process that differentiates itself from its competitors in design and performance due to its aerodynamic features.”

Our take on the Argolf Mordred putter

When you are dreaming of your next high-end milled putter, Argolf might not be the first name that pops into your head. Argolf is a French company founded in 2010 by a couple of aeronautical industrialists and a golf professional. By combining the expertise from both sites, Argolf has created a line of milled putters that not only look like art but with performance that rivals more well-known brands.

Mordred is a large mallet that boasts a very low center of gravity and super high MOI. Milled out of a solid block of aerospace-grade 7175 aluminum, the design is influenced by the aerodynamic lines from F1 race cars. The face features Argolf’s C-Claw technology that produces a more consistent forward roll without skidding. The Mordred is finished off with a single orange site line, a black PVD shaft, and a Pure midsize grip.

When you open the box, you are greeted with a nice grey and orange head cover that feels high quality and durable. Headcover removed, you will say hello to one of the larger mallet putters you have ever tried. The finish is a matte dark gray that eliminates glare and contrasts well with the orange paint fill. Traditionally high end milled putters have milling lines on most of the head and ARGOLF hid most of those in this head. The milling lines and marks are still visible on the rounded sections, but any flat surface is perfectly smooth. From what I have been told by machinists, it is more expensive to remove those lines and marks.

Any mallet putter that boasts high MOI, the style is going to be love or hate. At first, I was taken back by how busy the Mordred is, but out on the course, those flowing lines melt away. Not once was I distracted by them while lining up a putt. Size is going to take some getting used to as it just frames the ball different than any other mallet I have tried.

Feel and sound is where Mordred really shines. I have putted with aluminum putters before, and depending on the design they can have a different sound or feel. The C-Claw face really offers a softer feel and sound with just a slight click at impact. Not as crisp as carbon steel, just a little more muted and I enjoyed the sounds and feel with the Titleist AVX.

ARGOLF’s C-Claw technology does what it says and gets the ball rolling with zero skidding, even on long uphill putts. Putting side-by-side with a standard faced putter you could easily see tell the difference in the first foot of roll. Some face technologies can cause issues with distance control, but every putt rolled out to the expected distance. Compared to a traditionally milled face the Mordred will roll a fraction farther, but something that is easy to adjust to with a handful of putts on the practice green.

Shots off center go almost exactly where you aimed; the toe miss leaks just a touch right. Putts struck on the heel go straight and lose minimal distance while feeling still very solid. Toe strikes leak a hair right and are met with a small amount of vibration letting you know you missed the center of the putter.

Overall, Argolf’s Mordred putter is a great option for someone who is looking for a super forgiving putter. A minor complaint is no grip options for a putter at this price. I like a standard size, firmer grip and there are no other options to select from. The other thing that could become an issue is how well the finish holds up. I always use the headcover when I am not using my putter and the finish still has a few minor marks on it. If you are anti-headcover you might notice faster wear. Those are pretty small issues, and I think that ARGOLF has a really solid putter here.

Your Reaction?
  • 29
  • LEGIT7
  • WOW4
  • LOL7
  • IDHT4
  • FLOP8
  • OB4
  • SHANK32

Continue Reading

19th Hole

Facebook

Trending