Connect with us

Equipment

Pushing it past the limit: TaylorMade M5, M6 drivers with Speed Injected Twist Face technology

Published

on

In a market where distance seems to dominate the conversation, TaylorMade has always been at or very near the top year in and year out. It’s no secret that some of the most popular offerings from the past 10-15 years have come straight out of the Top Secret “Kingdom.”

With the 2019 TaylorMade M5 and M6 drivers, it looks like this will be another year that the company sits right near the top of that mountain, with its most aggressive push in regards to tech advancement since the SLDR in 2013.

taylormade-speed-injected-twist-face-technology

Speed Injected Twist Face technology

Marketed as “taking speed to the limit,” TaylorMade’s next generation of the M family of drivers, the M5 and M6, feature a Speed Injected Twist Face, building on the Twist Face technology the company debuted with the M3 and M4 drivers last year. The M5 and M6 club faces are designed to initially exceed the USGA’s COR limit.

In simple terms, speed injected face technology is where they take all of the heads they produce, push them all past the USGA limit in regards to COR and work backwards to ensure they fall within the parameters — the algorithm-driven process of resin injection into the clubs via the two ports on the face brings the figure just inside the acceptable range.

“It was an engineering challenge to be sure and 4 years in the making but we knew if we could nail the injection technology, we would really have something special.”-TM Metalwoods Director, Tomo Bystedt

The Carlsbad-based company boosts ball speed in the M5 and M6 drivers through the interplay between a reengineered, more-flexible Hammerhead 2.0 slot, an ultra-thin titanium face with redesigned Inverted Cone Technology (ICT), internal support foam with variable amounts of injected resin, and, last but not least, a proprietary algorithm to tune each head.

TaylorMade M5

The popular T-Track TaylorMade debuted with M1 driver (which evolved into the Y-Track) further advances with this year’s offering. M5 and M5 Tour drivers feature an Inverted T-Track that allows for 1,770 unique CG configurations via the two 10-gram weights, as well as a range of MOI options. Golfers are afforded up to one degree of launch angle and 600 rpm of spin change adjustability, in addition to 25 yards of left-to-right adjustability. As with previous M Series drivers, the 2-degree loft sleeve allows for the adjustment of the loft, lie angle and face angle of the driver.

With a 10 percent smaller carbon composite crown footprint, TaylorMade’s fourth generation of carbon composite technology furthers the aim of efficient mass distribution and an optimized center of gravity. The new M Series club face is also 20 percent thinner with a 66 percent larger sweet spot than last year’s M3.

In addition to the 460cc M5, TaylorMade is launching an M5 Tour model, which features a 435cc head.

TaylorMade-M5-face

Director of Original Content Johnny Wunder was on site at “The Kingdom” in early December and had this to say on the key first impressions of the new M5/M6.

M5 look
“I actually preferred the look of the M3 overall BUT this driver is built for speed and the red paint and carbon fiber inspire that.”

M5 feel
“In my experience as a TM loyalist the feel has always been the determining factor, this is no different.” “It feels meaty out of the sweet spot and heel strikes still feel solid.”

M5 sound
“The sound reminded me of the SLDR oddly enough which has been my gamer for 5-6 years. Not as thumpy (a sound I like) as M1/M3.”

M5 overall
“Haven’t put it thru our typical ringer of testing, so I don’t want to comment on distance and spin, but at first sight, it’s another really solid, good looking, fast TaylorMade driver…these guys do that as well as anybody year in and year out.”

Related: 2019 TaylorMade M5 & M6 pictures

TaylorMade M5 specs, availability, and price

M5

  • Available for preorder on January 18, retail on February 1
  • MSRP: $549.99
  • 9, 10.5, and 12 degree lofts

M5 Tour

  • Available on March 1
  • MSRP: $549.99
  • 9, 10.5 degree lofts

Stock shafts: Mitsubishi CK Tensei Orange 60 and Project X HZRDUS Smoke 70

Stock grip: Golf Pride MCC Decade

TaylorMade M6 & M6 D-Type Drivers

2019-TaylorMade-M6

Likewise “injected to the maximum legal level of speed,” according to the company, TaylorMade’s M6 and M6 D-Type drives also feature the Speed Injected Twist Face.

“Injected Twist Face delivers a hot, yet accurate performance package in the new M6 driver. When you add optimized CG and MOI through the use of a full carbon crown and sole, the result is a complete driver that delivers on all fronts.” – Brian Bazzel, Vice President Product Creation

Equipped with the same six-layer composite carbon crown as the M5, the M6 also features a complete carbon fiber sole that is 54 percent lighter than in the M4 (its predecessor). This allows engineers to move even more discretionary weight low and back in the club for maximum forgiveness and a lower CG.

taylormade-m6-driver-face

TaylorMade M6 D-Type

The M6 D-Type the company’s draw-biased offering. A high-contrast topline masking makes the face angle appear more open than it actually is, leading to the golfer producing a more closed face at impact. The D-Type’s CG is closer to the heel, as well, giving the club 20 additional yards of draw bias than the M6.

Johnny Wunder on the M6

M6 look
“At address it does feel a bit more forgiving then the M5, it sits a lower profile or at least appears that way.”

M6 feel
“Not as meaty as the M5 for obvious reasons BUT its very stable and if quite solid no matter where on the face you catch it. It seems like the M6 will lend it self a bit more to the higher handicap, its very forgiving.”

M6 sound
“Surprising that I prefer the sound of this to the M5, it had that thumpy sound which I prefer.” Both sound great but if I was blind testing, the M6 acoustics is what I would chase.”

M6 overall
“Its definitely a winner for the player looking for something stable, forgiving and fun to hit. I’ll be surprised if the TM staff that were M2/M4 loyalists will stay in the M6, seems like this model won’t be as workable for the better player, but we will see. We have seen this for years with TM. They launch a “Tour” driver and a more forgiving driver at a lower cost, and the tour players migrate to the more forgiving of the two. Counterintuitive, yes, but reality. Will the more forgiving M6 (over the M5) find its way into tour bags and follow in the footprints of the 2016 M2 (over its M1 counterpart?)”

taylormade-m6-driver-crown

M6 specs, availability, and price

  • Available for preorder on January 18 and at retail on February 1
  • MSRP: $499.99
  • 9, 10.5, and 12 degree  (RH only) lofts

Stock shafts

  • M6: Fujikura Atmos Orange 5, Fujikura Atmos Black 6 in S-, R- and A-flexes
  • M6 D-Type: Project X EvenFlow Max Carry 45 in 6.0 (S), 5.5 (R) and 5.0 (A)

For women: the M6 and M6 D-Type drivers will be offered in 10.5 and 12 degree lofts (RH only) and comes equipped with TaylorMade’s Tuned Performance 45g L-flex shaft.

The stock men’s grip is the Lamkin Dual Feel. Stock women’s grip is the Lamkin Comfort Plus Dual Feel.

Related: 2019 TaylorMade M5 & M6 pictures

Your Reaction?
  • 243
  • LEGIT33
  • WOW28
  • LOL66
  • IDHT13
  • FLOP61
  • OB64
  • SHANK289

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

57 Comments

57 Comments

  1. Jerry G

    Feb 10, 2019 at 9:36 pm

    Ever since Rocketbalzs 2 and SLDR, I don’t believe anything TM says …

  2. Darryl

    Feb 4, 2019 at 7:30 am

    The Emperor’s New Driver.

  3. Fast

    Jan 26, 2019 at 9:23 am

    So….if you took the injected foam out of the face, it would be faster/illegal?!?

    • BP

      Jan 29, 2019 at 6:28 pm

      As soon as I heard about it my first thought was how to get it out… with a SS of only 60mph due to physical impairment I look for every advantage I can get

  4. Speedy

    Jan 23, 2019 at 12:06 pm

    I could whack the non-draw biased M5, nice look. But not at its price tag.

  5. Billie Smith

    Jan 6, 2019 at 12:44 pm

    TM makes the best golf clubs – period – end of story.

    If they didn’t make the best gear the best players in the world wouldn’t use TM. Want to win? Want to create your legacy? Want to be part of Golf lore? You play TM. Period. Look who finishes in the top 10 every weekend on tour. Then look what’s in their bag – TM.

    All you whiners and arm chair Open winners can just shut up. You can’t play and can’t determine the difference between one companies driver to anothers. I use the TM Twist Face driver and it’s always brings my ball back to the fairway on wayward drives.

    Maybe you should spend more time practicing and playing the game instead of whining and complaining about golf clubs.

    • orv

      Jan 6, 2019 at 2:29 pm

      You convinced me. TM make superior clubs and they are tour tested. I would love to own the latest TM clubs but they are too expensive. If TM people are posting on this forum please lower your prices so that I and many of my golfing buddies can afford and buy your wonderful products.

    • TAYLORswiftMADE

      Jan 6, 2019 at 4:05 pm

      Um hmm, bob parson would Beg to differ, PERIOD.

  6. Bill Parker

    Jan 5, 2019 at 6:10 pm

    I got a M5 driver and it developed a rattle in the head. The store said they would send it back to TM to inject a bit more resin to stop the rattle. I hope it doesn’t depress the driver performance even more with the extra resin.

    • NWO4Life

      Jan 5, 2019 at 9:18 pm

      The M5 isn’t available to even pre-order until January 18th?

    • Simms

      Jan 6, 2019 at 1:31 am

      So if they inject more resin to stop the rattle they will be decreasing the COR…I would bet over time, just as happened in the past with some clubs, the injected product will break off and you will have a rattle, and if it breaks off enough you now will have a non-legal club as cor will go back up…RIGHT? What is the playing life of this $550 driver…only time will tell playing out on the course in different weather…

  7. ogo

    Jan 5, 2019 at 5:56 pm

    “It was an engineering challenge to be sure and 4 years in the making but we knew if we could nail the injection technology, we would really have something special.”-TM Metalwoods Director, Tomo Bystedt
    That’s not only ludicrous, it’s a bald-faced lie. This is a 30 day max engineering solution. Marketing mendacity…. sooo obvious.

    • Satan

      Jan 5, 2019 at 11:05 pm

      I have a nice bench on which for you to bend over when I spank you

    • Simms

      Jan 6, 2019 at 1:33 am

      Do you really think the golf engineers are really good, look at Wilson 2 years ago their engineers gave us the Triton driver…

      • ogo

        Jan 6, 2019 at 1:39 am

        I doubt OEM golf companies hire graduate engineers for piddling golf club cosmetics. Besides real engineers cost too much and you can get an engineering technologist for half price and halfazz solutions… which looks like TM club designs.

  8. Daniel Green

    Jan 5, 2019 at 2:48 pm

    Has there ever been a bad product review in any major publication about any club? Looking at reviews has to be the most pointless thing ever.

    • ogo

      Jan 5, 2019 at 6:01 pm

      Gearheads live off Pinocchio stories and they are fed blatant lies which they eat up and believe. The M7 & M8 models are now in the product pipeline if the current c r a p doesn’t sell by June…. believe it…. and keep your money in your wallet.

  9. smz

    Jan 5, 2019 at 1:20 pm

    I want my driver injected so my dynamic loft is up there and ready to blast that ball into the hole. Foam is better than toking an empty can of air and playing stoned.

  10. Rich Douglas

    Jan 5, 2019 at 11:03 am

    I used to chase clubs…a lot. I got off that jag a couple of years ago with a radical approach: club fitting.

    Buying off-the-rack stuff for years, I was grasping in the dark. With irons I’d go from super-game-improvement to forged blades and everything in-between…then back through it again. It was stupid. Woods? Every time TM came out with something I’d get it, regardless of whether or not it was good for me. But….

    I finally got fitted for the driver. I was spinning the ball too much, ballooning my drives and getting insufficient roll-out. So I got fitted. Thinking I was going to purchase the latest Callaway (to replace the latest TM, natch), I instead went with the driver-and-shaft combo that got my RPMs down (by a thou). In my case, that was the Titleist 917D. I would never have come to that decision on my own, but I’m glad I did. I’d have to see a real, significant difference in performance before swapping it out. Money is no object, but performance is.

    Irons were the same issue…until I got fitted for single-length Wishon Sterlings. Now, I could be tempted with an upgrade there, but no one is coming out with anything better. Cobra and Edel have good products, but there’s no real reason to switch. And since I’m never going back to variable-length irons (after two years, I’m pretty sure of that), I guess I’ll be gaming the Sterlings for a very long time. Now, if Ping should come out with a set….

    • ogo

      Jan 5, 2019 at 6:06 pm

      You are an exception after gaining wisdom to get fitted. Gearheads live to buy and flaunt the latest model clubs so they can be the first to bag the latest greatest new clubs. Most gearheads who list their WITB ar senal of silly club-shaft combinations are simply a man-child who likely doesn’t have a game…. soooo obvious

    • Ripper

      Jan 5, 2019 at 11:08 pm

      Man you’re a great salesman Rich, but totally unconvincing

  11. Tom

    Jan 5, 2019 at 2:11 am

    Not going to the PGA Show, giving up the Driver Count, and this bee S marketing story for a new launch? This company isn’t worth what the current buyers paid for it, guess that’s why they haven’t flipped it. How the mighty have fallen.

  12. Tom

    Jan 4, 2019 at 6:31 pm

    Company was reportedly bought at fire sale price of $430 mil from adidas, probably worth a lot less than that now….this product line is just plain embarrassing….

    • ogo

      Jan 5, 2019 at 6:13 pm

      Let’s ridicule this ridiculous rube goldberg driver off the market. It’s an insult to the game of golf. Enough is enough.

  13. Matt

    Jan 4, 2019 at 12:29 pm

    All the TM bashing sustains me….

    Let the ‘true players’ keep buying the retread Titleist drivers every other year…

    The best players in the world are bombing TM drivers….

    Keep up the hate tho. It’s not tired or pointless just yet……..(eye roll)

    • Travis

      Jan 5, 2019 at 11:47 am

      The best players in the world are hitting TM drivers because they get paid to use TM drivers. Once other companies pay more (like Honma for JR) then those players will go elsewhere.

      • smz

        Jan 5, 2019 at 8:47 pm

        Recreational gullible golfers will buy these “tour tested” drivers because if it’s good enough for the pros it must be good enough for them. Those who buy one of these drivers will sing the praises of their recent purchase even though it does nothing for their game. Golfers are pathetic c l o w n s, laughing on the outside and crying on the inside. Yuk yuk… boo hoo …. 😮

    • james

      Jan 6, 2019 at 8:23 am

      watch the driver count this year. TM have pulled the budget for players. For the last 10 years they have paid everyone, even the lowest tour players in Europe were getting 18k per year for the driver. The driver count will flip this year. TM bought driver count and Titleist buy the ball count. You don’t need to dig very deep to understand that.

  14. HDTVMAN

    Jan 4, 2019 at 11:51 am

    Kind-a looks like the SLDR! The sliding weights do work, but when I originally saw the pics I thought the screws on the face would adjust the “twist-face”!!! Bottom line…bought a driver in the past 4 years? Compare your’s to the new one on the same monitor, same balls, at the same time. You’ll probably find the carry and dispersion similar. If so, save your money, until the next generation comes out, or save $100+ and buy the 2018 model. Remember, USGA numbers are maxed very closely by ALL manufacturers every year, so don’t expect 10-15-20 yards further with a 2019 model (maybe 1-3yds). Plus the prices are out of sight! Two top drivers for 2018, the Ping G400LST (and SFT) is now $299 and the Callaway Rogue is $399…why spend $549+ for a driver that definitely won’t out-perform either of these? Plus, check out different shafts–your driver’s engine. High-medium-low trajectory & higher & lower spin…are you hitting the shaft best for your game? Probably not!

  15. Tmagfag

    Jan 3, 2019 at 8:04 pm

    Mizuno with the classiest looking driver of 2019, lol

  16. Charles

    Jan 3, 2019 at 3:46 pm

    This club doesn’t look USGA legal

  17. Patrick

    Jan 3, 2019 at 3:41 pm

    That’s what we need. 30% thinner! The engineers at Taylormade don’t care if we fill the landfill with cracked heads…..they must “innovate” or become unemployed!

  18. JP

    Jan 3, 2019 at 2:36 pm

    You gotta have screws for brains to buy into this latest marketing ploy

  19. Steve

    Jan 3, 2019 at 1:46 pm

    This brings new meaning to “hitting it on the screws”…

    • DJpga

      Jan 4, 2019 at 7:57 am

      No it doesn’t. Wooden driver heads had screws around the sweet spot.

  20. HKO

    Jan 3, 2019 at 1:27 pm

    screw holes on the face? what a great engineering decision. more cracked drivers will directly sell more heads sorta math? LOL.

  21. Blake

    Jan 3, 2019 at 12:21 pm

    I just dont like the look. The squared toe and screws in the face are just too much

  22. Tom

    Jan 3, 2019 at 12:16 pm

    USGA equipment rules limit manufacturers from producing products with any meaningful performance improvements, this is more marketing bee S from a company that sold for a very low price to an investment company that is now trying to peddle it to another owner…. Save your money!! Sellers Be Sellin!

  23. William Davis

    Jan 3, 2019 at 11:41 am

    Madness.

  24. orv

    Jan 3, 2019 at 11:05 am

    Resin foam… twist face… inverted cone technology… carbon fiber crown… this has got to be the ultimate in driver technology.

    • john

      Jan 25, 2019 at 12:48 pm

      Don’t forget that ‘proprietary algorithm’, Orv. That’s the clincher for me!

  25. orv

    Jan 3, 2019 at 11:01 am

    This is beyond belief!! Injecting Speed Foam resin into driver and fairway heads will blow away the competition. Why didn’t others think of this first?!!

  26. dat

    Jan 3, 2019 at 9:59 am

    Just charge $1K, they’ll still sell. PXG may sue for all those screws, but whatevs. Not like people are leaving the game or anything.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

WRX Spotlight Review: TaylorMade M5 fairway Rocket 3

Published

on

Product: TaylorMade M5 fairway Rocket 3

Pitch: The TaylorMade M5 fairway Rocket 3 is a stronger-lofted version of the standard TaylorMade M5 3-wood. The Rocket is 14 degrees. The standard M5 is 15.

Our take on the TaylorMade M5 Rocket 3

“WOW, you really hit that 3-wood like a rocket!”

” Not like a rocket… an actual Rocket!”

The beloved 3-wood. A favorite club of both average golfers and pros alike, a club that many will hold onto well after what some might consider their “best before” date. But with new options and improved technology, these old faithfuls are getting the boot quicker for a lot of reasons including the ability to better dial in a fit and help minimizing misses.

Since making a club faster off the middle is becoming more and more difficult thanks to the limits set forth but the USGA, OEMs are changing the way we think about clubs and putting a greater focus on decreasing dispersion and optimizing misses. TaylorMade is doing this with TwistFace, which was originally introduced in drivers a generation ago, and has now been included in the M5 and M6 fairway woods.

I got to spend some time with the knowledgeable crew at TaylorMade Canada in their new indoor facility just north of Toronto (lets call it Kingdom North) In that time, we went through a driver fitting, and then to the new M5 fairway woods to try and replace one of my oldest faithfuls: a 14-degree SLDR Tour Spoon. To say I have a unique ability to elevate a fairway wood is something that even my fitter was a little surprised by. My numbers with my cranked down to 12 degree (measured) fairway off the deck were good but could be improved. I can hit it both ways (as much as a 6-handicap can actually claim that) but my trusted go-to shot is a slight fade with some heel bias contact because of my swing. I am willing to sacrifice some distance but usually hit it where I want.

What I saw at the end of the fitting was a club that produced longer shots along with a tighter dispersion without having to make or to try and make any changes to my swing. The final fit was a 14-degree “Rocket” M5 fairway set to 12 degrees. It beat out my SLDR by a total of nine yards, which is an increase of just over a total of three percent, including an additional six yards of carry.

To say I was honestly surprised would be an understatement. The SLDR TS is a club that the first time I hit it I went WHOA! Low spin, workable, looks exactly how I want that club to look (small and compact). You can see from the numbers below when it works it works.

Why does TwistFace work?

Let’s explain and get a little deep in the technology weeds for a second. Bulge and roll is not a new concept. In fact, it would be a lie to claim that all OEMs haven’t done something similar to this is the past or played with these two variables to help golfers hit better shots. Fact: Every OEM optimizes the bulge and roll on their clubs to increase speed and maximize performance. Tom Wishon actually had a line of woods at one point that went the other way had VERY limited roll from the top tine to the sole. With this design, more loft on the bottom of the head helped players who miss low or need help elevating the ball off the deck increase launch and spin. It worked. Cobra also has what it calls E9 technology to tweak bulge and roll to help maximize the speed and forgiveness of their woods. It also works.

What makes TaylorMade’s TwistFace different is that it is the most aggressive iteration of this bulge and roll tweaking yet, and by introducing it into the fairway woods and hybrids, it’s proving to be a winner — even for this now-proven wrong skeptic.

At the end of the day, the M5 Ti “Rocket” was a measurable improvement over my previous 3-wood. Now it would be disingenuous to say “if you aren’t using TwistFace in your fairway woods you’re not maximized,” but if you are someone that struggles with fairway wood dispersion and looking to find some extra distance for taking on par-5s, taking a look at the new M5 and M6 fairway woods as part of your next fitting should be very high on your list.

 

Your Reaction?
  • 19
  • LEGIT3
  • WOW3
  • LOL3
  • IDHT1
  • FLOP1
  • OB1
  • SHANK23

Continue Reading

Equipment

Forum Thread of the Day: “Low handicapper switching to game improvement irons”

Published

on

Today’s Forum Thread of the Day comes from jasonTel3 – a low handicap player who plays blades but who has had his head turned by game improvement irons. According to jasonTel3, every ball was hit straight when testing out a set of Ping G400’s at a simulator, and he’s been asking fellow members for advice on whether he should make the move to GI’s.

Here are a few posts from the thread discussing jasonTel3’s conundrum, but make sure to check out the entire discussion and have your say at the link below.

  • balls_deep: “My first thought is to say don’t do it.. but then if you’ve hit them, liked them, and the numbers were right, it could be a good option. A friend I play with uses G400 and they have too much offset for my liking. I also don’t like that you can see the cavity on the 4 and 5 iron. Top line is actually very nice for a SGI iron. I just read the Ping Blueprint article on Golf Digest where they were talking about how some players hit small heads better. I definitely fall into that category. That said, I just ordered a set of i210 to try as I had really good luck with the i200 and should never have sold them. Have you tried the newer I series? IMO it’s GI help in a players look with an acceptable sole width. Long story short though – if you felt comfortable and the fit was right, why not try them? If you don’t work the ball a ton, I don’t see any issue with it. High and straight is a good way to go!”
  • hammergolf: “I’ve been playing Ping G25’s for 6 years. Still can’t find anything I like better. I can hit any shot I need to whether it’s my stock draw, fade, high, or low. And when I hit it a little thin, or on the toe, it still lands on the green. My thought is why play golf with a club that will punish you for mishit when you can play one that will help you.”
  • azone: “Everyone has an opinion, and here is mine. If you are/have been a good ball striker with a sound mental game, your mind will keep writing checks your body may not be able to cash as you get older or don’t practice enough. Those “ugly” forgiving irons look beautiful when a miss ends up on the green, and you are putting– not in rough or deep in a short side bunker. Those irons won’t be AS ACCURATE as, say, a blade, BUT if you aren’t as dependable as in the past, your results will be better. I used to keep two sets of blueprinted irons; blades for practice and CB for play. I play with guys that have cashed checks playing…and they don’t care how ugly the iron is.”
  • Jut: “As a decent player (and ball striker) and a sweeper/picker (I could hit off of a green and not take any landscape with me), I’ve found much success with the F9s (which, with the wide sole, are very similar to the G410 irons). In the past 4 years I’ve gone from Mizuno MP-68 to Callaway Apex CF16 to Ping i500 (a brief and bad experience) to the Cobra F9’s. For what it’s worth, the Cobras have been the best of the bunch by far.”

Entire Thread: “Low handicap going to game improvement irons”

Your Reaction?
  • 23
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT2
  • FLOP3
  • OB4
  • SHANK7

Continue Reading

Equipment

WRX Spotlight: Stitch headcovers

Published

on

Product: Stitch headcovers

Pitch: From Stitch: “Your game should match your style. At Stitch, we aim to merchandise our line of products so you can easily put together items that not only match your bag and what is it in it, but also match your style and personality. We want to make it easy for you to have a unique and color-coordinated golf bag. We have designed unique products that have defined color schemes so that choosing which items to put in your bag becomes easier. We aim to provide you with various looks, mixing and matching our head covers to give you confidence that the purchase you make for your bag will take you to the course in style. Let us help you dress your game.”

Our Take On Stitch Headcovers

Stitch is a relatively new company – founded in 2012. The company initially only created premium headcovers but has grown into so much more, with all sorts of golfing accessories now on offer on their site StitchGolf.com. Their bags, in particular, are now some of the most popular amongst golfers, with the quality and uniqueness provided leading multiple Tour players to sport them in tournament play.

That sign of quality in the bags bodes well for what the company was founded on – their headcovers. Stitch provides both leather and knit headcovers in a variety of designs that do as good a job as any in covering the needs of all golfers.

Stitch describes the companies Monte Carlo headcover as being their “classic, timeless design”, and for those looking for that vintage style to add to their set up then they can’t go wrong with this headcover. A mainstay in the likes of multiple tour winner Paul Casey’s bag, the Monte Carlo headcover, as with all of the companies leather covers, is hand-crafted from 100% leather and is both water and stain resistant. The cover comes in four color codes: Black, White, Navy and Red, and at $68 is the most affordable of all their leather headcovers.

Other options in the leather department range from their intricately designed Camo cover which comes in a multiple color design, as well as Stitch’s tribute to “The King”, through their Arnold Palmer headcover.

The AP cover comes in a minimalist black with white stripes for a classic feel, but it also comes in a white color code decorated with red, white and yellow stripes which, for myself at least, looks even more alluring. Part of an exclusive collection, the only issue with the AP cover is that only those located in the U.S. are currently eligible to get their hands on one. But for those in the states, the company is now offering a set of three AP leather covers for $128 instead of $298 should you use the code APLEATHERS on their site.

From their Tour Racer, USA, Shamrock and Bonesman editions, Stitch provides a great choice when it comes to their leather covers, and as previously mentioned, all are hand-crafted from 100% leather, water and stain resistant and will assure an excellent fit on your clubs.

Stitch also provides knit headcovers which contain not only excellent designs but also the same quality which has gone into their leather covers. All of the companies knit covers are made from Techno Wool, which is 100% acrylic and designed in order for your clubs to stay entirely dry. Another feature of the knit covers from Stitch is their smart fit design which ensures all of the covers retain their shape over a long period, as well as providing for a cover that will reliably stay on your club.

The knit covers from Stitch cost $68 ($72 for the limited AP cover), and there are currently seven different designs available to choose from over at StitchGolf.com. The leather covers are, unsurprisingly, a little pricier, but still very affordable, ranging from $68-$98. The covers deliver in both style and performance, and for a relatively new company, it speaks volumes that the likes of Jim Furyk, Paul Casey, Bryson DeChambeau and many more tour pros are now sporting the company’s creations.

 

 

Your Reaction?
  • 28
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT1
  • FLOP2
  • OB0
  • SHANK9

Continue Reading

19th Hole

Facebook

Trending