Connect with us

Equipment

Pushing it past the limit: TaylorMade M5, M6 drivers with Speed Injected Twist Face technology

Published

on

In a market where distance seems to dominate the conversation, TaylorMade has always been at or very near the top year in and year out. It’s no secret that some of the most popular offerings from the past 10-15 years have come straight out of the Top Secret “Kingdom.”

With the 2019 TaylorMade M5 and M6 drivers, it looks like this will be another year that the company sits right near the top of that mountain, with its most aggressive push in regards to tech advancement since the SLDR in 2013.

taylormade-speed-injected-twist-face-technology

Speed Injected Twist Face technology

Marketed as “taking speed to the limit,” TaylorMade’s next generation of the M family of drivers, the M5 and M6, feature a Speed Injected Twist Face, building on the Twist Face technology the company debuted with the M3 and M4 drivers last year. The M5 and M6 club faces are designed to initially exceed the USGA’s COR limit.

In simple terms, speed injected face technology is where they take all of the heads they produce, push them all past the USGA limit in regards to COR and work backwards to ensure they fall within the parameters — the algorithm-driven process of resin injection into the clubs via the two ports on the face brings the figure just inside the acceptable range.

“It was an engineering challenge to be sure and 4 years in the making but we knew if we could nail the injection technology, we would really have something special.”-TM Metalwoods Director, Tomo Bystedt

The Carlsbad-based company boosts ball speed in the M5 and M6 drivers through the interplay between a reengineered, more-flexible Hammerhead 2.0 slot, an ultra-thin titanium face with redesigned Inverted Cone Technology (ICT), internal support foam with variable amounts of injected resin, and, last but not least, a proprietary algorithm to tune each head.

TaylorMade M5

The popular T-Track TaylorMade debuted with M1 driver (which evolved into the Y-Track) further advances with this year’s offering. M5 and M5 Tour drivers feature an Inverted T-Track that allows for 1,770 unique CG configurations via the two 10-gram weights, as well as a range of MOI options. Golfers are afforded up to one degree of launch angle and 600 rpm of spin change adjustability, in addition to 25 yards of left-to-right adjustability. As with previous M Series drivers, the 2-degree loft sleeve allows for the adjustment of the loft, lie angle and face angle of the driver.

With a 10 percent smaller carbon composite crown footprint, TaylorMade’s fourth generation of carbon composite technology furthers the aim of efficient mass distribution and an optimized center of gravity. The new M Series club face is also 20 percent thinner with a 66 percent larger sweet spot than last year’s M3.

In addition to the 460cc M5, TaylorMade is launching an M5 Tour model, which features a 435cc head.

TaylorMade-M5-face

Director of Original Content Johnny Wunder was on site at “The Kingdom” in early December and had this to say on the key first impressions of the new M5/M6.

M5 look
“I actually preferred the look of the M3 overall BUT this driver is built for speed and the red paint and carbon fiber inspire that.”

M5 feel
“In my experience as a TM loyalist the feel has always been the determining factor, this is no different.” “It feels meaty out of the sweet spot and heel strikes still feel solid.”

M5 sound
“The sound reminded me of the SLDR oddly enough which has been my gamer for 5-6 years. Not as thumpy (a sound I like) as M1/M3.”

M5 overall
“Haven’t put it thru our typical ringer of testing, so I don’t want to comment on distance and spin, but at first sight, it’s another really solid, good looking, fast TaylorMade driver…these guys do that as well as anybody year in and year out.”

Related: 2019 TaylorMade M5 & M6 pictures

TaylorMade M5 specs, availability, and price

M5

  • Available for preorder on January 18, retail on February 1
  • MSRP: $549.99
  • 9, 10.5, and 12 degree lofts

M5 Tour

  • Available on March 1
  • MSRP: $549.99
  • 9, 10.5 degree lofts

Stock shafts: Mitsubishi CK Tensei Orange 60 and Project X HZRDUS Smoke 70

Stock grip: Golf Pride MCC Decade

TaylorMade M6 & M6 D-Type Drivers

2019-TaylorMade-M6

Likewise “injected to the maximum legal level of speed,” according to the company, TaylorMade’s M6 and M6 D-Type drives also feature the Speed Injected Twist Face.

“Injected Twist Face delivers a hot, yet accurate performance package in the new M6 driver. When you add optimized CG and MOI through the use of a full carbon crown and sole, the result is a complete driver that delivers on all fronts.” – Brian Bazzel, Vice President Product Creation

Equipped with the same six-layer composite carbon crown as the M5, the M6 also features a complete carbon fiber sole that is 54 percent lighter than in the M4 (its predecessor). This allows engineers to move even more discretionary weight low and back in the club for maximum forgiveness and a lower CG.

taylormade-m6-driver-face

TaylorMade M6 D-Type

The M6 D-Type the company’s draw-biased offering. A high-contrast topline masking makes the face angle appear more open than it actually is, leading to the golfer producing a more closed face at impact. The D-Type’s CG is closer to the heel, as well, giving the club 20 additional yards of draw bias than the M6.

Johnny Wunder on the M6

M6 look
“At address it does feel a bit more forgiving then the M5, it sits a lower profile or at least appears that way.”

M6 feel
“Not as meaty as the M5 for obvious reasons BUT its very stable and if quite solid no matter where on the face you catch it. It seems like the M6 will lend it self a bit more to the higher handicap, its very forgiving.”

M6 sound
“Surprising that I prefer the sound of this to the M5, it had that thumpy sound which I prefer.” Both sound great but if I was blind testing, the M6 acoustics is what I would chase.”

M6 overall
“Its definitely a winner for the player looking for something stable, forgiving and fun to hit. I’ll be surprised if the TM staff that were M2/M4 loyalists will stay in the M6, seems like this model won’t be as workable for the better player, but we will see. We have seen this for years with TM. They launch a “Tour” driver and a more forgiving driver at a lower cost, and the tour players migrate to the more forgiving of the two. Counterintuitive, yes, but reality. Will the more forgiving M6 (over the M5) find its way into tour bags and follow in the footprints of the 2016 M2 (over its M1 counterpart?)”

taylormade-m6-driver-crown

M6 specs, availability, and price

  • Available for preorder on January 18 and at retail on February 1
  • MSRP: $499.99
  • 9, 10.5, and 12 degree  (RH only) lofts

Stock shafts

  • M6: Fujikura Atmos Orange 5, Fujikura Atmos Black 6 in S-, R- and A-flexes
  • M6 D-Type: Project X EvenFlow Max Carry 45 in 6.0 (S), 5.5 (R) and 5.0 (A)

For women: the M6 and M6 D-Type drivers will be offered in 10.5 and 12 degree lofts (RH only) and comes equipped with TaylorMade’s Tuned Performance 45g L-flex shaft.

The stock men’s grip is the Lamkin Dual Feel. Stock women’s grip is the Lamkin Comfort Plus Dual Feel.

Related: 2019 TaylorMade M5 & M6 pictures

Your Reaction?
  • 246
  • LEGIT35
  • WOW28
  • LOL66
  • IDHT14
  • FLOP61
  • OB64
  • SHANK289

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

56 Comments

56 Comments

  1. Jerry G

    Feb 10, 2019 at 9:36 pm

    Ever since Rocketbalzs 2 and SLDR, I don’t believe anything TM says …

  2. Darryl

    Feb 4, 2019 at 7:30 am

    The Emperor’s New Driver.

  3. Fast

    Jan 26, 2019 at 9:23 am

    So….if you took the injected foam out of the face, it would be faster/illegal?!?

    • BP

      Jan 29, 2019 at 6:28 pm

      As soon as I heard about it my first thought was how to get it out… with a SS of only 60mph due to physical impairment I look for every advantage I can get

  4. Speedy

    Jan 23, 2019 at 12:06 pm

    I could whack the non-draw biased M5, nice look. But not at its price tag.

  5. TAYLORswiftMADE

    Jan 6, 2019 at 4:05 pm

    Um hmm, bob parson would Beg to differ, PERIOD.

  6. orv

    Jan 6, 2019 at 2:29 pm

    You convinced me. TM make superior clubs and they are tour tested. I would love to own the latest TM clubs but they are too expensive. If TM people are posting on this forum please lower your prices so that I and many of my golfing buddies can afford and buy your wonderful products.

  7. Bill Parker

    Jan 5, 2019 at 6:10 pm

    I got a M5 driver and it developed a rattle in the head. The store said they would send it back to TM to inject a bit more resin to stop the rattle. I hope it doesn’t depress the driver performance even more with the extra resin.

    • NWO4Life

      Jan 5, 2019 at 9:18 pm

      The M5 isn’t available to even pre-order until January 18th?

    • Simms

      Jan 6, 2019 at 1:31 am

      So if they inject more resin to stop the rattle they will be decreasing the COR…I would bet over time, just as happened in the past with some clubs, the injected product will break off and you will have a rattle, and if it breaks off enough you now will have a non-legal club as cor will go back up…RIGHT? What is the playing life of this $550 driver…only time will tell playing out on the course in different weather…

  8. ogo

    Jan 5, 2019 at 5:56 pm

    “It was an engineering challenge to be sure and 4 years in the making but we knew if we could nail the injection technology, we would really have something special.”-TM Metalwoods Director, Tomo Bystedt
    That’s not only ludicrous, it’s a bald-faced lie. This is a 30 day max engineering solution. Marketing mendacity…. sooo obvious.

    • Satan

      Jan 5, 2019 at 11:05 pm

      I have a nice bench on which for you to bend over when I spank you

    • Simms

      Jan 6, 2019 at 1:33 am

      Do you really think the golf engineers are really good, look at Wilson 2 years ago their engineers gave us the Triton driver…

      • ogo

        Jan 6, 2019 at 1:39 am

        I doubt OEM golf companies hire graduate engineers for piddling golf club cosmetics. Besides real engineers cost too much and you can get an engineering technologist for half price and halfazz solutions… which looks like TM club designs.

  9. Daniel Green

    Jan 5, 2019 at 2:48 pm

    Has there ever been a bad product review in any major publication about any club? Looking at reviews has to be the most pointless thing ever.

    • ogo

      Jan 5, 2019 at 6:01 pm

      Gearheads live off Pinocchio stories and they are fed blatant lies which they eat up and believe. The M7 & M8 models are now in the product pipeline if the current c r a p doesn’t sell by June…. believe it…. and keep your money in your wallet.

  10. smz

    Jan 5, 2019 at 1:20 pm

    I want my driver injected so my dynamic loft is up there and ready to blast that ball into the hole. Foam is better than toking an empty can of air and playing stoned.

  11. Rich Douglas

    Jan 5, 2019 at 11:03 am

    I used to chase clubs…a lot. I got off that jag a couple of years ago with a radical approach: club fitting.

    Buying off-the-rack stuff for years, I was grasping in the dark. With irons I’d go from super-game-improvement to forged blades and everything in-between…then back through it again. It was stupid. Woods? Every time TM came out with something I’d get it, regardless of whether or not it was good for me. But….

    I finally got fitted for the driver. I was spinning the ball too much, ballooning my drives and getting insufficient roll-out. So I got fitted. Thinking I was going to purchase the latest Callaway (to replace the latest TM, natch), I instead went with the driver-and-shaft combo that got my RPMs down (by a thou). In my case, that was the Titleist 917D. I would never have come to that decision on my own, but I’m glad I did. I’d have to see a real, significant difference in performance before swapping it out. Money is no object, but performance is.

    Irons were the same issue…until I got fitted for single-length Wishon Sterlings. Now, I could be tempted with an upgrade there, but no one is coming out with anything better. Cobra and Edel have good products, but there’s no real reason to switch. And since I’m never going back to variable-length irons (after two years, I’m pretty sure of that), I guess I’ll be gaming the Sterlings for a very long time. Now, if Ping should come out with a set….

    • ogo

      Jan 5, 2019 at 6:06 pm

      You are an exception after gaining wisdom to get fitted. Gearheads live to buy and flaunt the latest model clubs so they can be the first to bag the latest greatest new clubs. Most gearheads who list their WITB ar senal of silly club-shaft combinations are simply a man-child who likely doesn’t have a game…. soooo obvious

    • Ripper

      Jan 5, 2019 at 11:08 pm

      Man you’re a great salesman Rich, but totally unconvincing

  12. Tom

    Jan 5, 2019 at 2:11 am

    Not going to the PGA Show, giving up the Driver Count, and this bee S marketing story for a new launch? This company isn’t worth what the current buyers paid for it, guess that’s why they haven’t flipped it. How the mighty have fallen.

  13. Tom

    Jan 4, 2019 at 6:31 pm

    Company was reportedly bought at fire sale price of $430 mil from adidas, probably worth a lot less than that now….this product line is just plain embarrassing….

    • ogo

      Jan 5, 2019 at 6:13 pm

      Let’s ridicule this ridiculous rube goldberg driver off the market. It’s an insult to the game of golf. Enough is enough.

  14. Matt

    Jan 4, 2019 at 12:29 pm

    All the TM bashing sustains me….

    Let the ‘true players’ keep buying the retread Titleist drivers every other year…

    The best players in the world are bombing TM drivers….

    Keep up the hate tho. It’s not tired or pointless just yet……..(eye roll)

    • Travis

      Jan 5, 2019 at 11:47 am

      The best players in the world are hitting TM drivers because they get paid to use TM drivers. Once other companies pay more (like Honma for JR) then those players will go elsewhere.

      • smz

        Jan 5, 2019 at 8:47 pm

        Recreational gullible golfers will buy these “tour tested” drivers because if it’s good enough for the pros it must be good enough for them. Those who buy one of these drivers will sing the praises of their recent purchase even though it does nothing for their game. Golfers are pathetic c l o w n s, laughing on the outside and crying on the inside. Yuk yuk… boo hoo …. 😮

    • james

      Jan 6, 2019 at 8:23 am

      watch the driver count this year. TM have pulled the budget for players. For the last 10 years they have paid everyone, even the lowest tour players in Europe were getting 18k per year for the driver. The driver count will flip this year. TM bought driver count and Titleist buy the ball count. You don’t need to dig very deep to understand that.

  15. HDTVMAN

    Jan 4, 2019 at 11:51 am

    Kind-a looks like the SLDR! The sliding weights do work, but when I originally saw the pics I thought the screws on the face would adjust the “twist-face”!!! Bottom line…bought a driver in the past 4 years? Compare your’s to the new one on the same monitor, same balls, at the same time. You’ll probably find the carry and dispersion similar. If so, save your money, until the next generation comes out, or save $100+ and buy the 2018 model. Remember, USGA numbers are maxed very closely by ALL manufacturers every year, so don’t expect 10-15-20 yards further with a 2019 model (maybe 1-3yds). Plus the prices are out of sight! Two top drivers for 2018, the Ping G400LST (and SFT) is now $299 and the Callaway Rogue is $399…why spend $549+ for a driver that definitely won’t out-perform either of these? Plus, check out different shafts–your driver’s engine. High-medium-low trajectory & higher & lower spin…are you hitting the shaft best for your game? Probably not!

  16. Tmagfag

    Jan 3, 2019 at 8:04 pm

    Mizuno with the classiest looking driver of 2019, lol

  17. Charles

    Jan 3, 2019 at 3:46 pm

    This club doesn’t look USGA legal

  18. Patrick

    Jan 3, 2019 at 3:41 pm

    That’s what we need. 30% thinner! The engineers at Taylormade don’t care if we fill the landfill with cracked heads…..they must “innovate” or become unemployed!

  19. JP

    Jan 3, 2019 at 2:36 pm

    You gotta have screws for brains to buy into this latest marketing ploy

  20. Steve

    Jan 3, 2019 at 1:46 pm

    This brings new meaning to “hitting it on the screws”…

    • DJpga

      Jan 4, 2019 at 7:57 am

      No it doesn’t. Wooden driver heads had screws around the sweet spot.

  21. HKO

    Jan 3, 2019 at 1:27 pm

    screw holes on the face? what a great engineering decision. more cracked drivers will directly sell more heads sorta math? LOL.

  22. Blake

    Jan 3, 2019 at 12:21 pm

    I just dont like the look. The squared toe and screws in the face are just too much

  23. Tom

    Jan 3, 2019 at 12:16 pm

    USGA equipment rules limit manufacturers from producing products with any meaningful performance improvements, this is more marketing bee S from a company that sold for a very low price to an investment company that is now trying to peddle it to another owner…. Save your money!! Sellers Be Sellin!

  24. William Davis

    Jan 3, 2019 at 11:41 am

    Madness.

  25. orv

    Jan 3, 2019 at 11:05 am

    Resin foam… twist face… inverted cone technology… carbon fiber crown… this has got to be the ultimate in driver technology.

    • john

      Jan 25, 2019 at 12:48 pm

      Don’t forget that ‘proprietary algorithm’, Orv. That’s the clincher for me!

  26. orv

    Jan 3, 2019 at 11:01 am

    This is beyond belief!! Injecting Speed Foam resin into driver and fairway heads will blow away the competition. Why didn’t others think of this first?!!

  27. dat

    Jan 3, 2019 at 9:59 am

    Just charge $1K, they’ll still sell. PXG may sue for all those screws, but whatevs. Not like people are leaving the game or anything.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Coming out of the haze: What to expect from the OEMs in the second half of 2020

Published

on

As we slowly come out of the lockdown haze, it’s going to be interesting to see which OEMs are primed to come out swinging. From where I sit, there are a few companies that either kept the foot on the pedal or found new ways to interact with the masses. I have been tracking the major companies for different reasons, and I am optimistic on most fronts. Now, it needs to be said that everyone has been keeping the respective momentum going in their own ways—this has been a challenge for everyone, so this analysis is simply a commentary on what may come in the second half of the year.

Many good folks were either furloughed or laid off during this lockdown—that’s where we all lost. It needs to be acknowledged that we are talking about golf here, but the underlying reality of this is still devastating. I so look forward to getting into the trenches with these folks again either back where they were or at new companies.

TaylorMade became educators…and kicked off live golf again

Big giant club company or big giant marketing machine…it doesn’t matter what you label them as. TaylorMade Golf, in my opinion, turned the heartbreak of stalling one of the biggest first quarters in company history into an opportunity to start talking…and teaching. With the help of the tour team and TM athletes, TaylorMade focused hard on talking to us all during the lockdown. With multiple initiatives through social media, the Driving Relief event, and the tour staff engaging way more than usual. I believe TM created a runway to start moving quickly once stores and pro shops open up again.

Let’s face it, with the social media presence, the most robust tour staff maybe ever, and the driver everyone seems to have reserved for the top big stick of 2020, what’s not to be confident about? On the flip side, a company that big could have really taken it on the chin hard, but how they handled the lockdown—from my chair—was fun to watch and will ultimately ensure a quick restart. There is something to be said about having guys like Trottie, Adrian, and Hause in the fold informing and keeping things fun.

Rumor has it new irons are dropping in the fall/winter, which could spell two awesome bookends to a bittersweet 2020.

PXG leaned in

Why online sales for all OEMs spiked is no mystery. Boredom, desire, and a credit card are keys to any great online buying experience, but PXG made certain that if you were not a buyer previously, you may be now.

The price tag has always been a key topic with Bob Parsons’ Scottsdale-based company. It’s no secret that the clubs aren’t cheap, but during this lockdown, they did multiple strategic initiatives to not only crank up direct-to-consumer buying but also expand the PXG conversation into different areas, namely fashion.

Price cuts across the board started early and, rumor has it, enabled PXG to achieve sales numbers unlike any other period in the company’s short history. Yes, cutting prices helps unit sales, but in the case of PXG, it brought in the club customer that ordinarily shied away from PXG for financial reasons and ultimately made them buyers. That’s where PXG seems to shine, once they finally get you in, they are very effective at keeping you in the family. Mercedes-Benz AMG is like that: once you have had a taste of the Kool-Aid, it’s hard to go back to Hawaiian Punch.

In addition to the aggressive price-cutting, PXG fashion, spearheaded by President Renee Parsons, launched a new collection that is designed and manufactured by PXG. Fashion in times like these is always a risk from a financial standpoint, but this launch has been on the calendar since the BOY and the current lockdown did not disrupt that. It speaks to the confidence that Bob and Renee have in what they are doing. Now, is it a guarantee that PXG garments will fly off the shelves? No. but that’s not the point, it’s the fact that this current climate didn’t scare them into pivoting or holding off.

Point to this pick is PXG looks healthy coming out of this and it was possible to believe that perhaps this would have taken a toll on the custom fit brand. There is even a commercial produced during lockdown to attract even more club builders to the fold. Not normal behavior in times like these, but is anything that PXG does normal? No, and that’s what makes them fun to talk about.

The company also released its Essential Facemask with 50 percent of proceeds going to Team Rubicon.

Ping was quiet…but don’t be fooled

Yes, they did some rare social media engagements with Kenton Oates and the tour staff, which were fantastic. But the real magic here was the quiet way in which Ping slipped into 2020 and the mystery they have in hand and what’s to come next.

There hasn’t been really any new Ping product in a good while, and I anticipate a big winter for the Solheim crew. Sometimes, silence is golden and from what I can gather, what Ping has coming in irons and woods will be yet again a launch that gets people talking.

Ping from a business standpoint is a company that gets one percent better every year. Never any dramatic shifts in strategy or product. It’s always good, it’s always high-performance, and it’s always in the “best of” category across the board.

Watch out for them over the next six to nine months…a storm is brewing. A good one.

Cobra introduced the “Rickie iron”

Cobra Rev 33 Irons

Compared to 2019 and the runaway success that was the F9 driver, Cobra Golf seemed to cruise along in the first quarter of 2020. The SpeedZone metal wood line was an improvement tech-wise from the F9 but seemed to get lost in the driver launch shuffle with an earlier release—and frankly everyone in the industry took a back seat to TaylorMade’s SIM.

It’s not placing one stick over the other actually, I have been very vocal about my affections for both, it’s just some years, the story around a club can generate excitement, and if the club is exceptional, boom. Cobra was that cool kid in 2019.

What Cobra decided to do in the downtime is slowly tease and taunt with a “Rickie Fowler” iron. Players blades aren’t typically the driving element of any business model, but what Cobra did was introduce to a beautiful yet completely authentic forging that will not only get the gear heads going nuts but also entice the better players to start looking at Cobra as a serious better players iron company. No small feat.

Point is, Cobra has generated buzz. It helped that Rickie’s performance at Seminole was just short of a precision clinic. Beyond the Rev 33, its rumored Cobra has a new players CB coming and some MIM wedges.

It should be an exciting last half for the Cobra crew.

The Titleist train chugged on

I mean, what else is there to say about Titleist? They are as American as apple pie, have a stranglehold on multiple tour and retail categories, and one of the best front offices in golf. The company is a well-oiled machine.

So what do I expect from them in the last half? Well pretty much what I would expect on any other year, solid player-driven equipment. A metal wood launch is coming, the SM8 was a huge hit in stores and on tour, and the ball portion is the biggest 800-pound gorilla in golf.

It was also nice to see a little more social media interaction beyond the traditional. Aaron Dill has been very active on the social media front and a good portion of the tour staff, namely Poulter, JT, and Homa were proactive in engagement. Might seem trivial to some, but specifically, Titleist and Ping are not super active in the organic interaction game, so it was nice to see both companies dive into the fold.

Cleveland/Srixon should have a lot to look forward to

Let’s be honest here, 2019 was a quiet year overall for Srixon. Shane Lowry won The Open, but in the golf mainstream it was a leap year for them in regards to any launches. The anticipation from me personally of what is to come is quite strong. I adore the irons. I have yet to meet one I didn’t love, and fitters across the country will speak to that in sales. The Srixon iron line has become a popular yet-sort-of-cult-classic among fitters and gearheads and rightly so. They are phenomenal.

The recently teased picture of the new driver on the USGA site more or less teased us of what is to come for the overall line. New Cleveland wedges are coming shortly and the golf ball has always been a solid component to the Huntington Beach company.

As much as anyone in the market, I believe Srixon could finish the year with some serious momentum going into 2021. The irons and ball have always been firestarters. My only wish for them, selfishly, is a more aggressive tour strategy in regards to landing one of the perennial top 10. It seems like a dumb thought, but I have always felt Cleveland/Srixon was always a serious hitter that at times seems to get lost in the conversation. Having a big gun on staff or a couple of them will remedy that quickly.

Callaway has an eye on big things for the golf ball

Callaway, a company that seems to do it all well, was actually a bit quiet since the lockdown started. After a solid release of the Mavrik line and some momentum in the golf ball area, I’m sure this lockdown probably felt like a kick to the shin.

However, this company is shifting in a good way. The idea that they were a golf club company that happened to make golf balls is slowly turning into a company with multiple major components that stand alone. TaylorMade is on a similar shift, and honestly it’s very interesting to watch. Do I think that anyone will ever catch Titleist in the ball category? No, I don’t. All of these mentioned golf balls are ridiculously good, but 75 years of trust and loyalty are hard to compete with. But that’s not the point, Callaway is a monster company that takes the golf ball conversation very seriously, and I believe this will serve them very well coming out of this craziness and help the momentum going into 2021.

 

 

 

Your Reaction?
  • 9
  • LEGIT2
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

Tour Edge EXS Pro Forged irons launched

Published

on

Tour Edge is expanding its better player targeted EXS Pro line with the addition of the all-new EXS Pro Forged irons—a tour-inspired design developed with multi-material technology, and looks to match.

Just like the limited edition EXP Pro driver, the EXS Pro Forged irons utilize the highest quality materials and processes to deliver a golf club built for the most discerning players. The goal of designer David Glod was to produce the most forgiving distance iron possible in a player-preferred package and the EXS Pro Forged live up to the lofty challenge.

 “As a club designer, I love player iron designs that are as beautiful as they are playable. These three designs were made to be irons that are drooled over by the core golfer, not only in looks and feel, but in how they perform.” David Glod – Tour Edge Lead Designer

“I believe that the milled forged iron connoisseurs out there are going to be very impressed with the playability we were able to combine with a traditional forged feel.”

Inside the Exotics EXS Pro forged irons

The EXS Pro Forged cavity iron is constructed of Japanese S25C mild carbon steel to offer an extremely soft feel to the golfer. After the forging process, the faces are CNC milled to precise tolerances and the grooves are designed to maximize performance throughout the set. The CNC milling of the EXS Pro doesn’t stop at the face either—the cavity is designed to boost MOI as much as possible in the compact clubhead, so the back of the club is also CNC milled to offer the thinnest face possible without sacrificing feel.

Speaking of feel, the term forged can be overused in the world of golf club construction with some lesser companies only stamping precast pieces once and calling them forged, but the EXS are not those clubs. The S25C club heads are triple-forged (struck 3 times at very high-pressure) to offer a thinner, stronger clubhead that allows the designer to push more mass to the toe and heel weight pads for more forgiveness and more consistent ball speeds across the face. To further improve feedback, the iron has an acoustic engineered cavity insert consisting of a polymer and a dampening gel to provide the best possible sound and feel.

Now about ball speeds and technology: The 3- 6-irons in the EXS Pro Forged cavity have a concealed 10g tungsten toe weight to push more mass away from the hosel and make the clubs more forgiving on heel and toe misses in the longer irons. This is similar technology to irons that are priced much higher in the market.

Availability, Specs & Pricing

The new Exotics EXS Pro Forged irons will be available for purchase on June 1, 2020 through select Tour Edge retailers and custom club fitting locations.

The stock shafts are: True Temper Elevate Tour VSS Pro—available in regular and stiff flex—as well as True Temper Dynamic Gold 105 in R300, S300.

The stock grip will be the Golf Pride Tour Velvet 360.

$149.99 per iron.

Your Reaction?
  • 34
  • LEGIT5
  • WOW4
  • LOL2
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

New limited-edition Tour Edge Exotics EXS Blade irons and wedges unveiled

Published

on

Tour Edge Exotics EXS blade irons

Tour Edge has unveiled its new limited-edition “Straight From the Tour Van” Exotics EXS Blade irons and wedges featuring forged designs with CNC milling.

Per Tour Edge, the Exotics EXS Blade irons combine “tour-level inspired looks and feel with advanced materials and innovation to produce the most forgiveness and distance possible in a player’s iron.”

Each iron and wedge are individually milled from carbon steel and “engineered for players who look for the ultimate in control and shot shaping.”

Tour Edge Exotics EXS blade irons

The new Tour Edge EXS Blade irons feature a narrow sole, a thin top line, and a beveled leading edge and square toe design. The irons also contain a shorter blade length and a cambered top line in a bid to provide golfers with a more compact scoring iron.

Tour Edge Exotics EXS blade irons

Designed with advanced CAD technology and pure milled forging, the new additions from Tour Edge feature micro-cavity face and scoring lines that are all individually CNC milled and designed to offer maximum responsiveness and control.

Tour Edge Exotics EXS blade irons

Fully USGA conforming, the blades are CNC milled on both sides, which aims to offer golfers a club that has extremely tight tolerance and consistency from iron to iron.

Tour Edge Exotics EXS blade irons

The clubs feature Japanese S25C carbon steel, which is chrome plated with a dual finish. The irons contain a high polish and a satin finish in all the milled areas of the clubhead.

Tour Edge Exotics EXS blade irons

The sole of the EXS Pro Blade iron head features a rounded radius on the leading edge of the clubhead – a design which seeks to significantly reduce drag and turf interaction through impact to provide ultimate consistency on every shot.

Tour Edge Exotics EXS blade irons

Specs, Availability and Pricing

  • Stock Shafts: True Temper Elevate Tour VSS Pro: R-flex, S-flex, True Temper Dynamic Gold 105: R300, S300
  • Grip: GolfPride Tour 360
  • Price: $149.99 per iron
  • Availability: June 1, 2020

Tour Edge Exotics EXS Blade wedges

Designed from Japanese S25C Carbon Steel, the new blade wedges from Tour Edge are individually CNC milled on the face and grooves in design to create maximum spin from advanced groove engineering.

Tour Edge Exotics EXS blade wedges

The EXS Milled Forged wedges utilize dual-groove construction, with the lower loft (50° – 52°) wedges designed with deeper, narrower grooves while the higher lofts (54° – 60°) have wider grooves.

Tour Edge Exotics EXS blade wedges

The Exotics EXS Blade wedges feature a Center of Gravity (CG) that has been moved up in the clubhead with a milled-out center design. The milled-out center on the wedges leads to more weight being positioned both up and down in design for greater distance control on shots higher and lower on the face.

Tour Edge Exotics EXS blade wedges

The EXS Pro’s sole grind on the new blade wedges seeks to reduce bounce from the heel and toe for greater versatility when hitting a variety of shots, especially from difficult lies. 

Tour Edge Exotics EXS blade wedges

The blade wedges contain a Flare Toe design which places the center of gravity higher in order to provide for lower launch and more spin. A chamfer was also added to the trailing top line of the wedge for a slightly thicker top line that moves weight up without affecting the aesthetics of the top line at address.

Tour Edge Exotics EXS blade wedges

As with the blade irons, the wedges are 100 percent conforming to the USGA rules.

Specs, Availability and Pricing

Stock Shafts: True Temper Dynamic Gold 115 Wedge Flex

Grip: GolfPride Tour 360

Price: $149.99 per wedge

Availability: June 1, 2020

Your Reaction?
  • 29
  • LEGIT10
  • WOW5
  • LOL1
  • IDHT1
  • FLOP2
  • OB1
  • SHANK1

Continue Reading

WITB

Facebook

Trending