Connect with us

Equipment

PXG 0811 X, XF Gen2 drivers, 0341 X woods feature Hot Rod Technology

Published

on

In true Bob Parsons fashion, the second generation driver offering from Scottsdale-based PXG draws inspiration from something very fast, very custom, and VERY USA: the American hot rod. The 2019 PXG driver will be the company’s first driver offering that lives up to the performance of its irons. That’s right, PXG is a legitimate driver company now with a product that will hold its own.

PXG 0811 X Driver, PXG 0811 XF Driver

PXG-0811-Driver-Sole

The PXG 0811 X and XF Gen2’s carbon fiber crown has the aggressive hood styling of a 500 horsepower Shelby Mustang. The sleek new multi-level crown not only packs a new-and-improved aerodynamic design but also provides structural support to the face where it’s most needed, according to the company. The resulting reduction in energy loss translates to a distance boost with enhanced control, as well as reduced drag.

The Hot Rod Technology-laden crown also acts as an alignment aid and reduces glare, says PXG, and it dampens vibration for what the company describes as “a pleasant and unique feel and sound, reminiscent of a persimmon driver head.”

2019-PXG-driver-face

As with the first generation of the 0811 drivers, Gen2 drivers again feature PXG’s proprietary thermoplastic elastomer (TPE) honeycomb insert. The TPE sole insert dampens vibrations and enhances feel, as well as the drivers’ acoustics. It takes a different form in the soles of the 0811 X and 0811 XF drivers, with the X having more TPE toward the face of the club.

With any top driver in this market, CG is a key talking point. The 0811 X features a very low CG that falls .160 below the axis line and even farther forward, which in turn reduces spin (which has always been the key criticism of the Gen1, i.e., that it spun too much) and enhances launch conditions.

Likewise, Chief Product Officer Brad Schweigert and his design team again include Precision-Weighting Technology. The weights are larger and heavier than those in the 0811 models but offer players the same ability to adjust based on a draw/fade bias and alter launch angle and spin. More specifically, the 0811 X has three 4.1 gram silver tungsten weights and six 0.8 gram black titanium weights. The XF has three of the silver weights and two of the black.

Early testing at PXG Headquarters, November 2018

GolfWRX Director of Content Johnny Wunder was on site at Scottsdale National to test the Gen2 drivers. Here are his initial thoughts.

Look
“This driver looks fast, It looks solid and it inspires confidence. What more can you ask for? It’s a vast improvement from its predecessor. Interestingly, the crown looks much lighter in sunlight than it does indoors, as you can see in our photos.”

Feel
“The 0811X felt extremely solid across the face, now I will say that I lean more towards a dense feel in a driver and that’s exactly what this is. I found the earlier versions to feel a bit hollow but not anymore, it’s really solid. And my spin numbers were better in testing than with the Gen1.”

Sound
“PXG drivers have always looked and sounded great in my experience so this was already plus.”

Overall
“I think they did a fantastic job at acknowledging shortcomings from before and pushing to release a club that lived up to the irons and also one that would fly into tour player bags…mission accomplished.”

More details

PXG 0811 X

  • Weight forward design; distance-focused for high ball speed
  • Smaller profile head shape
  • Extremely low CG location — below the neutral axis approximately 0.160”

PXG 0811 XF

  • CG is low and back to increases dynamic launch, promote mid-spin performance
  • Designed at USGA MAX MOI 5900 g-cm2 for maximum forgiveness
  • Larger profile head shape
  • CG depth over 1/2” further back than the X Driver; CG designed on the neutral axis

Shafts/grips, etc.

  • All PXG equipment is fit and assembled by an authorized PXG custom fitter

Specs

Price

The Gen2 0811X and XF drivers will retail for $575, which puts them square in the major OEM price range.

PXG GEN2 fairway woods and hybrids

The PXG Gen2 fairway woods and hybrids will also feature Hot Rod Technology, and with the sleek carbon fiber crown, will offer an easy transition from the driver.

Truth be told, PXG has always done well here, the fairways and hybrids of the previous release received high praise for overall performance, due especially to the Precision-Weighting System. This system plays well in smaller-headed, higher-lofted woods due to the amount of customization that is available. The real win in this offering is the appearance of the golf club, like the driver, it’s visually appealing and an improvement from the Gen1.

According to PXG’s Brad Schweigert, one of the other main keys to dialing in the fairway woods was a stiffer crown and moving the CG down and forward, which not only improved sound and feel but also created noticeable gains in Tour staff testing.

In regards to sole design and turf interaction, the Gen2 fairway woods and hybrids will have a slightly lower profile than the Gen1 to ensure confidence off the ground and dig into the turf a bit better.

Early testing of the PXG 341 X Woods and PXG 0317 X hybrid

Again, Johnny Wunder…

Look
“The new crown is a serious win here especially in the fairway woods, the ball frames up nicely and more than Gen1, I feel like I can go down and really get this club into the ground.”

Feel
“Overall it feels solid but I will say that it can be a bit dead on mishits, obviously that may be player specific. Out of the middle it’s really hot and very solid.”

Sound
“What I like the most about this new Gen2 is the overall sound across the board. Especially when you catch one, the sound is second to none.”

Overall
“This was already a category they figured out in my opinion so its more forward progress, and I think that players that are in previous offerings will switch, this Gen2 just look and feels better then an already really good golf club (Gen1). In regards to the hybrids, I tend to run from them BUT after messing around with the PXG fitter, my opinion has changed and a 22 degree may find its way in the bag.”

Price

  • Fairway woods: $425; hybrids: $375

*Official release date for all clubs is January 15

Your Reaction?
  • 158
  • LEGIT27
  • WOW29
  • LOL71
  • IDHT3
  • FLOP70
  • OB66
  • SHANK168

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

12 Comments

12 Comments

  1. Scott Longmore

    Jan 26, 2019 at 3:25 am

    I just bought the Driver, 3 wood, and 19 degree hybrid last week and cannot wait to use them in the Spring. I really loved the Gen 1 woods and have read good reviews of the Gen 2 woods. They are not as expensive as the Gen 1 woods but are supposed to be better performing.

  2. Alex

    Jan 22, 2019 at 10:55 am

    Unless you hit this thing you have zero right to comment. I do not have any PXG clubs in my bag, they were just too expensive for me. I currently game a TS2, i tried the gen 2 yesterday side by side on a trackman. And wow, this club is as good as any. For the price its actually a no brainer unless you have some serious hate towards the guy (and then it’s just jealousy). The driver was amazing and a ton of free shaft upgrades. If i didn’t get deals on Titleist equipment, this would definitely be in the runnings.

  3. ogo

    Jan 7, 2019 at 10:39 pm

    A WILLIAM ROSS PATENT SPRING-FACE IRON, CIRCA 1893
    http://www.sothebys.com/en/auctions/ecatalogue/2007/the-jeffery-b-ellis-antique-golf-club-collection-n08380/lot.379.html

    Well… so much for PXG innovative”engineering” superiority “engineering” superiority… 😮

  4. Jose Pinatas

    Jan 6, 2019 at 5:08 pm

    I think there missing the point here. They need to keep adding screws, not reducing the amount…. Each model going forward, the screws should increase by 5. Eventually they’ll be small enough where they’ll actually benefit my +1 handicap.

  5. JB

    Jan 5, 2019 at 10:21 am

    I really think this is going to be a good product for them! It looks good, feels good, and sounds good. The price point is very competitive to the other OEMs. I believe the M5 and the Epic Flash are both going to be $549. I think it is now worth comparing the PXG in any fitting, and if it is a better fit for some players than it will be worth the extra $25.

  6. Joey

    Jan 3, 2019 at 5:10 pm

    Maybe you PXG haters should check out the article on MyGolfSpy. They do a very thorough breakdown of the new tech and design of these drivers compared to the Gen 1’s and others. First understand the science behind a club and then leave a comment. A lot of you seem misinformed and just want to take shots at a company that actually produces a quality project. With the price points of other upcoming big OEM releases, i’d much rather look into the PXG’s for an extra $25-$75 bucks.

  7. benseattle

    Jan 2, 2019 at 7:11 pm

    Don’t mean to interrupt all the knee-jerk PXG haters here but I do have a question: in the “tour X” model, it’s said to have a “Smaller profile head shape” and I take it that means a smaller-headed driver. What are the cc’s in this club? Haters aside (and I’m no PXG fan-boy, believe you me) I’m VERY surprised at the $575 price point. Weren’t the first drivers from PXG priced at around $850? Bob Parsons: always thinking of the masses!

    • Michael E Maloney

      Jan 24, 2019 at 7:20 pm

      It’s the same size just like the two different models of Titleist driver and the two different models of Callaway driver there just shaped a little bit differently The XF is shaped wider and flatter to put the weight one back the X is not considered tour it’s just the X version and has a more traditional pear-shaped Less length left to right and Deeper face.

  8. Tommy

    Jan 2, 2019 at 12:02 pm

    You say that the Hybrid “feels dead” on mishits. Ever hit a Ping G Hybrid? Same, dead on mishits…coincidence? I think not.

  9. West Phi

    Jan 2, 2019 at 10:40 am

    Looks cool, and I hope it performs, but a “Hot Rod” driver? This is not the demographic the mass golfing consumer fits into. Still leery of PXG and its marketing. I would have called it the “Stealth” or something less “redneck.”

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Why Rory McIlroy will likely use the new TaylorMade BRNR Mini Driver Copper at the RBC Heritage

Published

on

Although we spotted Rory McIlroy testing the new TaylorMade BRNR Mini Driver Copper last week during practice rounds at the Masters, he ultimately didn’t decide to use the club in competition.

It seems that will change this week at the 2024 RBC Heritage, played at the short-and-tight Harbour Town Golf Links in Hilton Head.

When asked on Wednesday following his morning Pro-Am if he’d be using the new, nostalgic BRNR Copper this week, McIlroy said, “I think so.”

“I like it,” McIlroy told GolfWRX.com on Tuesday regarding the BRNR. “This would be a good week for it.”

 

View this post on Instagram

 

A post shared by GolfWRX (@golfwrx)

According to Adrian Rietveld, the Senior Manager of Tour at TaylorMade, the BRNR Mini Driver can help McIlroy position himself properly off the tee at the tight layout.

Here’s what Rietveld told GolfWRX.com on Wednesday:

“For someone like Rory, who’s that long at the top end of the bag, and then you put him on a course like Harbour Town, it’s tough off the tee. It’s tight into the greens, and you have to put yourself in position off the tee to have a shot into the green. It kind of reminds me of Valderrama in Spain, where you can be in the fairway and have no shot into the green.

“I’m caddying for Tommy [Fleetwood] this week, so I was walking the course last night and looking at a few things. There’s just such a small margin for error. You can be standing in the fairway at 300 yards and have a shot, but at 320 you don’t. So if you don’t hit a perfect shot, you could be stuck behind a tree. And then if you’re back at 280, it might be a really tough shot into the small greens.

“So for Rory [with the BRNR], it’s a nice course-specific golf club for him. He’s got both shots with it; he can move it right-to-left or left-to-right. And the main thing about this club has been the accuracy and the dispersion with it. I mean, it’s been amazing for Tommy.

“This was the first event Tommy used a BRNR last year, and I remember talking to him about it, and he said he couldn’t wait to play it at Augusta next year. And he just never took it out of the bag because he’s so comfortable with it, and hitting it off the deck.

“So you look at Rory, and you want to have the tools working to your advantage out here, and the driver could hand-cuff him a bit with all of the shots you’d have to manufacture.”

So, although McIlroy might not be making a permanent switch into the new TaylorMade BRNR Mini Driver Copper, he’s likely to switch into it this week.

His version is lofted at 13.5 degrees, and equipped with a Fujikura Ventus Black 7X shaft.

See more photos of Rory testing the BRNR Mini here

Your Reaction?
  • 16
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Spotted: TaylorMade P-UDI driving iron

Published

on

It seems like the RBC Heritage is full of new gear to be spotted, and you can add TaylorMade’s P-UDI utility irons to that list.

We spotted a 17-degree P-UDI 2-iron in Nick Dunlap’s bag yesterday, and now have some photos of both the 3- and 4-irons. Nick has his P-UDI 2-iron setup with a Project X HZRDUS Black 4th Gen 105g TX shaft.

From what we can tell, this new P-UDI utility iron looks to have some of the usual TaylorMade technology as we can see the Speed Slot on the sole of the club for additional face flexibility. A toe screw is usually used to close off the hollow body design that will probably be filled with a version of TaylorMade’s Speed Foam that is present in the current iron lineup. This hollow body, foam-filled design should offer additional ball speed, soft feel, and sound, as well as an optimized CG for ball flight.

“Forged” is etched into the hosel, so we can assume that either the face, body, or both are forged for a soft and responsive feel. The club looks good from behind and at address, where we can see just a little offset and a topline that I would consider medium thickness. We don’t have the full details on what is under the hood or how many loft options will be available yet.

TaylorMade P-UDI 3-iron – 20°

TaylorMade P-UDI 4-iron – 22°

Your Reaction?
  • 12
  • LEGIT1
  • WOW2
  • LOL0
  • IDHT0
  • FLOP1
  • OB0
  • SHANK1

Continue Reading

Whats in the Bag

Collin Morikawa WITB 2024 (April)

Published

on

Driver: TaylorMade Qi10 LS (9 degrees)
Shaft: Mitsubishi Diamana D+ Limited 60 TX (45 inches)

3-wood: TaylorMade Qi10 (13.5 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

5-wood: TaylorMade Qi10 (18 degrees)
Shaft: Mitsubishi Diamana D+ Limited 80 TX

Irons: TaylorMade P770 (4), P7MC (5-6), P730 (7-PW)
Shafts: True Temper Dynamic Gold Tour Issue Mid 115 X100 (4-6), True Temper Dynamic Gold Tour Issue X100 (7-PW)

Wedges: TaylorMade MG4 (50-SB09, 56-LB08), TaylorMade MG4 TW (60-TW11)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: TaylorMade TP Soto
Grip: SuperStroke Zenergy Tour 2.0

Grips: Golf Pride Z-Grip Cord

Ball: TaylorMade TP5x

Your Reaction?
  • 4
  • LEGIT0
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Trending