Connect with us

Equipment

2019 TaylorMadeTP5 and TP5x golf balls feature High-Flex Material

Published

on

Announced today, TaylorMade is set to update its premium tour balls, the TaylorMade TP5 and TaylorMade TP5x, next month.

At the core behind both golf balls is TaylorMade’s new High-Flex Material (HFM). The new material, which TaylorMade has described as its “fastest material” ever, is a tightly wound spring, which is designed to create more rebound energy when compressed for added ball speed.

The tightly wound spring characteristic of HFM also aims to increase the force on the driver face, to further improve the speed of the golf ball as soon as it leaves the driver head.

2019 TP5 cutaway.

The HFM is integrated into TaylorMade’s new Speed-Layer System, which is comprised of four increasingly stiff layers, creating a Speed-Layer System that enables a soft core to be wrapped by increasingly rigid materials, allowing each outer layer to become progressively faster with the aim of controlling spin rates without affecting speed or distance.

Speaking on the new releases from TaylorMade, and its brand new HFM material, Director of Golf Ball R&D, Eric Loper, stated

“With the new TP5 and TP5x golf balls, we knew there was an opportunity to make them even faster. Our research into the driver and ball interaction at the moment of impact along with the development of a new material (HFM) has given us the ability to more efficiently convert compression into speed, at any swing speed. The new Speed-Layer System (SLS) controls spin rates that is critical for driver, iron and wedge performance.”

The new balls from TaylorMade both feature a Tri-Fast Core consisting of an extra-large, low-compression inner core (16 compression in TP5 & 25 compression in TP5x) and a progressively stiffer outer core and mantle. The combination of these cores is designed to create lower drag and increased carry for all level of swing speeds.

2019 TP5x cutaway.

As well as this, the 2019 TP5 and TP5x golf balls contain a Dual-Spin-Cover which holds an ultra-soft cast urethane cover and a 30% more rigid inner cover, which aims to provide excellent control on greenside shots through the rigid inner cover forcing the soft urethane cover into wedge grooves. The new Soft-Tough cast urethane cover has also been introduced to provide greater overall durability.

According to TaylorMade, the TP5 ball has a softer feel, launches lower on iron shots and is targeted at golfers who desire more spin around the green, while the TP5x contains a firmer feel and is designed for players wishing to generate higher launching iron shots.

The 2019 TP5 and TP5x will both be available at retail on February 15, 2019. The cost of both golf balls is $44.99 per dozen.

Your Reaction?
  • 90
  • LEGIT11
  • WOW4
  • LOL2
  • IDHT4
  • FLOP2
  • OB0
  • SHANK8

We share your golf passion. You can follow GolfWRX on Twitter @GolfWRX, Facebook and Instagram.

14 Comments

14 Comments

  1. NoDonkeys

    Jul 1, 2019 at 10:45 pm

    Matt Kuchar sucks donkey.

  2. Art Williams

    Jan 4, 2019 at 8:18 pm

    Over the last few weeks it’s obvious 2019 is the year of fast, faster and fastest. The espionage among and between the big golf companies must be fast and furious as they bring out similar products in similar colors with similar marketing schemes. Must be a lot spies employed by them, especially Callaway and Taylor Made. I noticed they both were very fast to exceed the $500 ceiling.

  3. WB

    Jan 4, 2019 at 2:12 am

    I gained 14 yards on the driver when I went from Tour Preferred X to TP5X. If the new TP5X gets only 3 yards more I’m in.

  4. David

    Jan 3, 2019 at 11:14 am

    These must be pretty bad since they didn’t jack the price 30%. TM must know they don’t perform well enough to deserve the same price increases as the rest of their line.

    • Frank

      Jan 3, 2019 at 4:41 pm

      Must be David. Keep dropping nearly $60 on that “superior” ProV1

      • KM01

        Jan 4, 2019 at 7:50 am

        At the end of the day Pro V is superior. I still think TM are having their balls made by someone else so the probability is that some of them probably don’t even have 5 layers, when you look at how bad the rest of their quality control is. I tried TP5 last time around and it doesn’t spin enough through the bag.
        It’s obvious what they’re going for in their marketing blurb. Distance off the driver. That’s always the first thing they say in everything they say.
        Thing is, I’m still only going to be hitting max 14 drives in a round. So the majority of my shots I need more control. You don’t get that with something that doesn’t spin.

        • Daniel Forbes

          Jan 5, 2019 at 4:36 am

          Realistically if you are hitting max 14 drives per round, then u probably dont hit it well enough for spin to be an issue. I hit 14 drivers almost every time i play. Obviously playing a distance ball will prob hurt me… but Playing a proV isn’t going to improve my score at all. Unfortunately taylormade realised they could charge a lot more and did so. So the range of balls available that all qork the same is huge for amatuers now

          • KM01

            Jan 5, 2019 at 3:30 pm

            This comment makes absolutely no sense whatsoever. How could hitting at most 14 drives in a round mean that you don’t hit it well enough to worry about spin? You do realise that most golf courses would have 4 par 3’s meaning, realistically you would only ever have to hit driver at very most 14 times, and on shorter par 4’s you’d hit irons! I’ve played 2 British amateur championships, and have had quite a good amateur career…
            There’s no such thing as a distance ball and a spin ball anymore. This isn’t the days of persimmon woods and balata balls.
            Spin does not just come in to play on shots green side. It’s on every shot you hit. Every golfer needs a certain amount of spin to keep their ball airborne, depending on their launch characteristics.
            Please have a proper ball fitting. You might just learn something…

  5. Thomas A

    Jan 3, 2019 at 10:48 am

    So they are TP5-ier?

  6. bill

    Jan 3, 2019 at 10:20 am

    having to click read more is really annoying. just show the full article

    • Gil

      Jan 4, 2019 at 7:21 pm

      Who do you claim is making their balls? Why do you question TM’s quality control?

      • KM01

        Jan 6, 2019 at 5:04 am

        That’s a fact. Look it up. There is only one company who actually manufacture their own golf balls. Everyone else buys in.
        Have you not seen TM’s product the past few years? The rubber in the speed slots on irons has been falling out, iron faces caving in, and some of the loft and lies) swing weights that I’ve had delivered to my shop have been so far out its unbelievable. A couple of years ago, I had an M2 4 iron arrive which was to be standard loft/lie and it was 17*. Quality control is worse than terrible.

    • Daniel

      Jan 5, 2019 at 4:27 am

      That is dumbest thing ive ever ive ever read.. u have to scroll down anyway so i dont think clicking 1 button will kill u..

  7. Thunder Bear

    Jan 3, 2019 at 10:12 am

    Of all things releasing this year, I’m most excited about the golf balls coming out. Seems like every company is on the same release schedule with golf balls so I plan to take them all out and do a battle royale to find the best ball. I’ve played the TP5x for a couple years and really excited to see if their claims are actually true.

Leave a Reply

Cancel reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Whats in the Bag

Justin Thomas’ winning WITB: 2019 CJ Cup

Published

on

justin-thomas-winning-witb-justin-thomas-witb

Driver: Titleist TS3 (9.5 degrees)
Shaft: Mitsubishi Diamana ZF 60TX

justin-thomas-witb-driver

3-wood: Titleist TS3 (15 degrees)
Shaft: Mitsubishi Tensei CK Pro Blue 80TX

5-wood: Titleist 915Fd (18 degrees)
Shaft: Fujikura Motore Speeder VC 9.2 Tour Spec X

Irons: Titleist T100 (4-iron), Titleist 620 MB (5-9)
Shafts: True Temper Dynamic Gold Tour Issue X100

Wedges: Vokey Design SM7 (46, 52, 56 degrees), Vokey Design SM6 (60 degrees)
Shaft: True Temper Dynamic Gold Tour Issue S400

Photo via Vokey Wedge Rep Aaron Dill

Putter: Scotty Cameron X5

Grip: SuperStroke Pistol GT Tour

Ball: Titleist Pro V1x

View this post on Instagram

How @justinthomas34 marks his @titleist Pro V1x ????

A post shared by Ben Alberstadt (@benalberstadt) on

Grips: Golf Pride Tour Velvet Cord

Your Reaction?
  • 28
  • LEGIT2
  • WOW0
  • LOL1
  • IDHT0
  • FLOP1
  • OB1
  • SHANK4

Continue Reading

Whats in the Bag

Cameron Champ WITB 2019

Published

on

cameron-champ-whats-in-the-bag-2019-witb-featured-

*Equipment accurate as of the Houston Open

Driver: Ping G410 LST (9.5 degrees, flat+, CG shifter in neutral, 5g face, 5g toe weight)
Shaft: Project X HZRDUS Smoke Green 70G-6.5 TX (44.25″, tipped 1.5″, D4)

cameron-champ-witb-2019-driver

5-wood: Ping G410 (@17 degrees, flat standard, 5g face weight)
Shaft: Project X HZRDUS Black 95G-6.5 TX (41.75”, tipped 1.5″, D4)

cameron-champ-witb-2019-5-wood

Irons: Ping i500 [3-iron (38.75″, 21 degree loft, 1 degree up)], Ping iBlade [4-iron (1/2 degree flat, standard length)], Ping Blueprint [5-PW (1/2 degree flat, standard length)]
Shafts: True Temper Dynamic Gold X7 w/Cushin insert

cameron-champ-witb-2019-irons

Wedges: Ping Glide Forged (50, 54 degrees) (1 degree flat), TaylorMade Hi-Toe (60 degrees)
Shafts: True Temper Dynamic Gold Tour Issue S400

Putter: Ping PLD Prime Prototype (Stealth finish, straight arc, 34 3/8″, 19 degree lie, 2 degree loft, black shaft)
Grip: Ping PP58 Midsize Full Cord

Grips: Custom Lamkin Black 58R

Ball: Srixon Z-Star XV

Your Reaction?
  • 63
  • LEGIT4
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK5

Continue Reading

Equipment

WRX Spotlight: EV3D putters

Published

on

We hear the buzz words “3D printed” all the time these days. It’s a newer technology that has shown to have lots of applications in other industries, but golf hasn’t been one of those until now. 3D printing a putter is a pretty new adventure, but EV3D Golf is showing that it is going to be much more common very soon.

EV3D Golf is bringing new putter designs to us golfers that CANNOT be made through traditional casting or milling. 3D printing is the process of creating a putter layer-by-layer, allowing any supported shape you can think of. Even hollow designs like EV3D’s signature lattice features!

This gives EV3D engineers the ability to create putters that push the limits of MOI, feel, and of course look. The intricate lattice design does more than just look really cool, it also helps move weight to the outside and rear of the putter, increasing MOI in all models. All EV3D putters are printed from a combination of 420 stainless steel and bronze. This alloy gives the putter its responsive feel, excellent durability, and the ability to offer 3 finishes. They also offer a ton of different hosel designs to fit your eye and putting stroke, all are 3D printed as well. EV3D even adds custom touches like text in the cavity, different site lines, and paint fill to make it your own. Right now they offer 6 different head shapes, but if none of those are what you are looking for, they will work with you to print your dream putter from scratch!

We got our hands on 2 models, the EV3D Golf Ares X and Hades, to take out to the course and putt with. In hand the first thing that grabs your eye’s attention is the intricate lattice work on the putters.

All you want to do is hold the putter closer to your face and see how the heck they did it. At the right angles you can actually see through that lattice structure, but we were told that debris getting stuck in there isn’t an issue. The next thing you will notice is the rough texture of the head. This is created by the process of 3D printing the head, showing off the layers of material used to build the shape of the head. I don’t know if was intended but that rough texture does help with reducing glare, making the putters easy on the eyes even in the brightest conditions.

I personally really like the Antique Bronze finish, but EV3D does offer a Natural and Slate Black finish to suit your personal taste. Out on the putting green the Ev3D putters performed really well, offering a hefty dose of forgiveness and a crisp feel and sound. Traditionally modes like the Hades don’t offer much in the way of forgiveness compared to mallets, but the Hades shocked me with its off-center putts. Putts hit off the heel or toe stayed on line much better and I even made a couple that had no business even being close to the hole.

Distance loss on those mishits is about what you would expect, coming up a little short, but defiantly not a drastic difference. Since the EV3D line doesn’t have any fancy face milling, I was a little worried about the initial roll and if the ball would hop or skid. Initial contact was great, only met with a tiny bit of skid before rolling out. Nothing that I think effected even my longest putts. The feel off the face is something that reminds you of a quieter classic Ping BeCu putter, crisp with an audible click. If you are looking for a silent impact, like an Odyssey Microhinge, then the EV3D line might not be your cup of tea. If you are on a quest for exceptional responsiveness on well struck and mishit putts then you should be very pleased with any of the EV3D putter models. The feel of impact is a little firmer than I think we are all used to these days with so many inserts and deep milling. The crisp feel and slightly more audible EV3D is somewhat refreshing and mishit putts are extremely easy to recognize.

Overall, the EV3D putters are a solid offering from a new company utilizing a new technology in the golf club space. With all the combinations of putter heads, site lines, and hosels, I can’t see you not being able to find a putter that fits your eye. Looks for any putter are going to be subjective, but there is no denying that EV3D is pushing the limits at a time where we see a lot of similar putter designs from all manufacturers. And if you are the type of person who wants to create an original design of your own that has never been done, EV3D is waiting for that call to help you take your idea from thought to printed putter head! Check the entire EV3D putter line at the company website.

Your Reaction?
  • 87
  • LEGIT17
  • WOW13
  • LOL7
  • IDHT1
  • FLOP6
  • OB2
  • SHANK51

Continue Reading

19th Hole

Facebook

Trending