Connect with us

Equipment

Forum Thread of the Day: “Is it easier to hit players irons?”

Published

on

Today’s Forum Thread of the Day was created by lazyjc4, who asks fellow GolfWRX members for their opinion on what they feel are some of the easiest to hit players irons on the market. Our members have mentioned a multitude of players irons, with plenty of detailed reasoning behind their choices.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • thewral: “New Level 902. Single piece forging, feel great, smallish head, low offset, distance lofts.”
  • naj959: “I went through a couple of sets of irons this year which included 765s, flyz+, and finally settled on the…..Bridgestone J15 DPF. There are some great reviews of these irons. The 765s are forgiving, but the j15s are even more so. They have a very thin top line, are workable, and are lonnnng.”
  • Casper_golf: “Take a good look at the Wilson V6, or if you are looking for something older, guys really like the V4’s that can be found as a steal.  Way underrated irons. Soft feel forgiving and long for the weaker lofts they have. No offset.”
  • Sonja Henie: “Very interested in the comment about the 745s being similar to the 545s in forgiveness.  I’ve been very tempted by the 565s but might do better with the 765s.”

Entire Thread: “Easier to hit players irons?”

Your Reaction?
  • 10
  • LEGIT2
  • WOW1
  • LOL3
  • IDHT0
  • FLOP1
  • OB3
  • SHANK24

Gianni is a freelance writer. He holds a Bachelor of Arts as well as a Diploma in Sports Journalism. He can be contacted at gmagliocco@outlook.com. Follow him on Twitter @giancarlomag

4 Comments

4 Comments

  1. ChipNRun

    Dec 18, 2018 at 10:26 pm

    “Is it easier to hit players irons?”

    Easier for whom? For those of us that don’t always break 90, the answer is no.

    At demo day rough fittings, I usually chart out best with GI irons with sub-100 gram steel shafts, or Recoil 95s.

    A couple of the “player’s cavity” irons such as the Ping i200 fly well for me, but the bladish clubs are very tough to handle.

    A common tale I’m hearing from former college players who now have jobs and families: they shifted from players to GI irons because they don’t have time to keep a “players” swing in tune. The GI forgiveness helps their score, whereas the players high miss-to-supershot ratio hurts their score.

    To GM: Your thread focus was a bit hard to decipher. In future, you might run your question by a colleague to make sure you say what you mean to say. It’s rough when you end up as your only editor.

  2. John

    Dec 18, 2018 at 2:36 pm

    “Is it easier to hit players irons?” Is not the question he asked. Did you decide to make up your click-bait headline?

  3. A. Commoner

    Dec 15, 2018 at 11:10 am

    Good grief! Start with a ridiculous question and go from there.

  4. Gerald Teigrob

    Dec 14, 2018 at 5:59 pm

    I am always going with the thinking that I was always hit and miss with players irons but I might possibly be able to play with forged and forgiving irons. However I find the game improved a lot like my oversized irons, so I will keep playing them over the players’irons…I would make an exception with the Cobra Bio Cell+ irons though!

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

Spotted: Fujikura Ventus shafts

Published

on

fujikura-ventus-shafts

Photos of a new shaft offering from Fujikura have appeared in the GolfWRX Forums. We first spotted the Fujikura Ventus on Tour at the Safeway Open last year, and it went into two players’ bags that week.

Since then, the shaft has been showing up on Tour more frequently, and it is expected to come to retail some time early this year.

The Ventus is a Tour inspired design — meaning low torque and a stiff tip section. This profile creates a mid-launching shaft that also offers low spin.

The use of extremely stiff 70-ton pitch fiber throughout the full length of the shaft, creates more center face contact by reducing twisting at impact. The 70-ton fiber is laid at 45 degrees in the bias layer for tighter dispersion and consistency.

Fujikura itself tweeted the following evidence of continued player testing of the shaft.

See what GolfWRX Members are saying in this forum thread. 

Your Reaction?
  • 15
  • LEGIT2
  • WOW1
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Spotted: Project X HZRDUS Yellow Smoke shafts

Published

on

project-x-hzrdus-yellow-smoke

A Project X HZRDUS Yellow Smoke shaft has surfaced in the GolfWRX Forums.

To expand its popular HZRDUS line, it looks like Project X is testing the new Smoke series to include the Yellow Profile. If you recall, the Yellow was the second profile added to the original HZRDUS line which has the key features of

  • Higher balance point to allow for both longer lengths, or heads with a higher than standard mass.
  • Slightly softened profile for smoother tempo players, and increased feel

project-x-hzrdus-yellow-smoke-2

The pictures also show off a new “Small Batch” logo that seems to be a play on the very popular original Hand Crafted. This would appear related to the moving of the Hand Crafted production line out of the U.S. manufacturing facility in San Diego owing to the growing demand in the market for the shafts in both the aftermarket and with OEMs. These “Small Batch” shafts could mean a return to the U.S. production facility for Project X.

Bringing the Yellow Profile into the Smoke line would add a softer higher balance point (counter balanced) profile to a line up already designed to have increased feel. From a fitting standpoint, this could be another win-win shaft, perfect for the slightly less aggressive players looking to play a longer driver without sacrificing feel.

Read more in the forums

Your Reaction?
  • 25
  • LEGIT4
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK1

Continue Reading

Equipment

Forum Thread of the Day: “2019 Accra TZ5 & TZ6 shafts”

Published

on

Today’s Forum Thread of the Day showcases the 2019 Accra TZ5 & TZ6 shafts. The shafts have been met with resounding approval from our members on our forum, who almost to a man find them a thing of beauty, and are eager to find out just when they will hit the shelves.

For more photos, make sure to check out the full forum thread here.

Here are a few posts from the thread, and you can join the discussion at the link below.

  • Ziggy16: “Yessssss love it. I had the chance to hit Accra shafts for the first time in 2018. I think they are some of the best feeling shafts I’ve ever swung. It’s between them and VA Composites, although I just saw Oban is now back in the game. Still, after all these years, the HB is still making a mark in my bag.”
  • KMo23: “Have the TZP Proto in the Driver, can’t wait to find a weight and launch profile for a fairway wood. Lots of tour guys switching to this!”
  • Oaks: “It’s the best feeling Shaft I can remember in a while.  Reminds me of the old ACCRA feel that they were known for.”
  • rpmspooner: “I had a chance to chat with Reid at Accra yesterday. They are extremely excited about the Tz5 and Tz6. I think they think this one is a home run. “Smoother mid section” was the response. If that is true, I don’t know who is going to compete with ACCRA this year. They already owned the smooth space in golf shafts.”

Entire Thread: “2019 Accra TZ5 & TZ6 shafts”

Your Reaction?
  • 3
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

19th Hole

Facebook

Trending