Connect with us

Equipment

Forum Thread of the Day: “Guys that shoot under par, what clubs do you use?”

Published

on

Today’s Forum Thread of the Day comes from BiggEm, who asks those GolfWRX members that happen to break par consistently, what clubs they use. Driver and irons are the clubs in question which BiggEm is interested in hearing about, and as well as many posters submitting the clubs they use, an interesting debate regarding “arrow vs archer” has developed, as well as general playing tips from posters while out on the course.

Here are a few posts from the thread, but make sure to check out the entire discussion and have your say at the link below.

  • cm24: “5 years ago, When I was actually playing really well (for me), and I was in the +2 handicap range I was playing a set of Mizuno mp68 irons.  Sold those for AP2s and never have brought my game back.  I went thru 8 sets of irons over the three years after I sold the Mizunos and finally settled on a set of Srixon z965s.  I think those under par days are coming back, my birdies are going up as my proximity to the hole is going thru the roof, and it’s leading to confidence across my game.”
  • SASpeeder: “Not shooting under par quite as regularly anymore but still gaming the same equipment. Driver: Taylor M2 9.5” 2016 model with Diamana BF 60TX shaft. Irons: Miura CB1008 with KBS $Taper S+ shafts”
  • u2hockey14: “Adam Scott went back to his Titleist 910D3 this year due to accuracy issues, and he started to play better instantly. The bottom line is, for accomplished players, if you find a driver you can hit straight and are confident with it, stick with it. The extra 4-8 yards you get with “today’s” technology isn’t worth giving up that confidence and accuracy.”
  • leejohnkieh: “I’ve recently gotten my scores back down to even/under par after I got rid of drivers that didn’t work. For me, it’s all about feel and look. I went from 910d2 to a 17′ M1 to an M2 then to an M3 and now to the Ts3 in a span of 3 years. Tried every shaft known to man and I just could not get by round after round with TM drivers. Wildly inconsistent. I’d play tourneys not knowing where my driver was gonna go that day.”

Entire Thread: “Guys that shoot under par. What clubs do you use?”

Your Reaction?
  • 58
  • LEGIT10
  • WOW2
  • LOL3
  • IDHT3
  • FLOP10
  • OB7
  • SHANK58

Gianni is a freelance writer. He holds a Bachelor of Arts as well as a Diploma in Sports Journalism. He can be contacted at gmagliocco@outlook.com. Follow him on Twitter @giancarlomag

8 Comments

8 Comments

  1. ogo

    Dec 3, 2018 at 6:42 pm

    “What clubs do I use?”…. I use all the clubs in my WITB arsenal of golf destruction!!! 😮

  2. TONEY P

    Nov 21, 2018 at 12:08 pm

    As a scratch golfer for 25+ years , I’ve played cast, forged, cavity back, and muscleback irons, the club’s didn’t matter but the skill level you acquire to use them effectively to string together shots to score. Metal woods have made it easier to hit fairways and the newer irons fly straighter. the wedges are better but the biggest difference in scoring has been the ball. It’s longer and flyes straight but it not as good around the greens as balls 20 years ago.

    • ogo

      Nov 21, 2018 at 10:41 pm

      Is the shaft flex more important than the iron heads for your skill level? If your shaft was wrong flex/weight could you still play par golf? Also could you play your old TM Pittsburgh Persimmon driver with the tiny head as well as the current 460cc Ti cans on a stick? Congrats on your performance longevity.

  3. Birdswing

    Nov 21, 2018 at 8:35 am

    I use 917d3 10.5, 910f 17, vapor pro combo 2 iron, be pro combo 4 thru PW and 54/60 engage wedges.

    Important club is the Odyssey mxm no9 prototype putter though.

    Not a regular sub par player but certainly shot several under par rounds this year

  4. ogo

    Nov 20, 2018 at 7:04 pm

    Yes Yes Yes !!!!! It’s all in the clubs you bag…. and the newer the clubs the lower your sub-par score… it’s soooooo obvious …. 😮

  5. KB

    Nov 20, 2018 at 10:36 am

    Re u2hockey14, leejohnkieh posts. So true, couldn’t agree more.

    • SR

      Nov 20, 2018 at 10:50 am

      Then go post on the forum, duh.
      This space is only for slander lol

      • ogo

        Nov 22, 2018 at 3:41 pm

        Yes… “slander” on this forum is “reality” and “truth”… while the “love-besotted” gearheads circle jerk on the main forum. Thank you for this fair and fine forum provided by the fine folks at GolfWRX.

Leave a Reply

Your email address will not be published. Required fields are marked *

This site uses Akismet to reduce spam. Learn how your comment data is processed.

Equipment

SPOTTED: 2019 Mitsubishi shafts

Published

on

2019-mitsubishi-diamana-shafts

The Diamana shaft line from Mitsubishi Chemical is probably one of the most iconic in the sport. Released in 2005, Blueboard, Whiteboard, and Redboard, were the first generation of shafts.

Photos of the full fourth generation Diamana lineup, offering new materials and technology, along with new names, have surfaced in the GolfWRX forums. Like previous generations, each color shaft offers different ball flight and spin characteristics.

“RF” is the highest launching and spinning in the Diamana line, offering high launch and mid spin, while the “BF” is the mid-launch and mid/low-spin model. Finally, the “DF” is mid/low-launching and the lowest-spinning shaft in the lineup.

All of the fourth generation Diamana shafts use updated technologies and materials that you would expect from a premium lineup. DIALEAD pitch fiber is helps reduce shaft deformation, while still producing exceptional energy transfer.

Each shaft contains MR70 carbon fiber that is 20 percent stronger than conventional materials and Boron fiber for its compression strength and shaft reinforcement. ION plating has been done before in the Diamana line, in vacuum chambers — silver alloy ions are bonded to the shaft to give it a chrome-like finish that can’t be replicated by paint.

See what GolfWRX Members are saying in the forums.

Your Reaction?
  • 5
  • LEGIT0
  • WOW0
  • LOL0
  • IDHT0
  • FLOP0
  • OB0
  • SHANK0

Continue Reading

Equipment

SPOTTED: 2019 Aldila shafts

Published

on

aldila-2019-shafts

With the beginning of the PGA Tour’s West Coast swing on now, we are really starting to see more 2019 gear work it way onto tour trucks, and onto the range for player testing…and into our forums (in picture format, at least).

Some of the most recently spotted pieces are the 2019 Aldila ATX shafts, including what appears to be an 85g hybrid shaft and a 120g iron shaft.

aldila-2019-shafts

We can only speculate that the hybrid is a low launch shaft — based on the PGA  Tour testing being done, but this could be a shaft more suited for the growing popularity of the driving iron category vs. wood-like hybrids in the previous couple of seasons.

The 120g iron shaft has a lot of people talking, since Aldila has leaked some information in our picture thread

“It utilizes a custom prepreg made at our facility in Poway that features a “Metal Mesh” material that is combined with Carbon Fiber to help add stability and weight in the irons.”

aldila-metal-mesh

By using this custom material, Aldila could be solving the common problem that a lot of people have with graphite, and that is the club total weight — although in this case 120g is similar to a lot of steel iron shafts already being used on Tour. As prototyping goes, this material could be put to use in lighter versions of the shaft and have a greater benefit in the sub-100g category — if they plan on going that route.

For the drivers, if previous versions and colorways are any indication, it looks like we will have some new technology packed into popular bend profiles like the NV (Green) and the VS (Blue).  As some members on the forums have already discussed, these shafts will be utilizing graphene (an extremely strong carbon material) for additional stability. 

We also have new Rogue 130 MSI models following along similar lines with both a black and silver.

Here’s some additional information from Aldila

“Building off of the success of the ROGUE® Limited Edition – which featured 125 M.S.I. Graphitic Carbon Fiber, we have taken ROGUE® to performance to another level by incorporating even stronger 130 M.S.I. Graphitic Carbon Fiber. The ROGUE® Silver 130 M.S.I. is a low-launch, low-spin shaft with a low torque tip-section fortified with 130 M.S.I. Graphitic Carbon Fiber, a higher balance point, and a premium ion plated finish.”

Join the discussion in our forums

Your Reaction?
  • 7
  • LEGIT0
  • WOW0
  • LOL1
  • IDHT0
  • FLOP0
  • OB0
  • SHANK2

Continue Reading

Equipment

Brooks Koepka with Mizuno JPX 919 irons, TaylorMade M5 driver in the bag at Abu Dhabi HSBC Championship

Published

on

Brooks-Koepka-Mizuno-JPX919

Brooks Koepka is in action this week at the Abu Dhabi HSBC Championship equipped with a new driver and set of irons.

Golf.com’s Jonathan Wall broke the news, via Twitter, that Kopeka has TaylorMade’s new M5 Driver in his bag this week, as well as Mizuno’s JPX 919 Tour Irons.

The three-time major champ used TaylorMade’s M3 460 Driver and Mizuno’s JPX 900 Tour irons throughout 2018, and it appears as if Koepka is happy to make the transition to both manufacturers latest additions of those series of clubs right from the get-go in 2019.

Brooks-Koepka-Mizuno-JPX-919

Koepka is currently T13 after two rounds of play at the Abu Dhabi HSBC Championship and sits five shots off the lead.

 

Your Reaction?
  • 27
  • LEGIT3
  • WOW1
  • LOL3
  • IDHT1
  • FLOP3
  • OB2
  • SHANK4

Continue Reading

19th Hole

Facebook

Trending